NEC Plasmasync 50xm4 Users Manual

PlasmaSync Plasma Monitor
PlasmaSync 50XM4
PX-50XM4G  
Model Information
Modell-Informationen
Informations modèle
Información del modelo
Informazioni sul modello

нформация о модели
DownloadedTFromTTV2ManualьcomTManuals 

E-1
Specifications
Screen Size1106(H)
622(V) mm
43.5"(H)
24.5"(V) inches
diagonal 50"
Aspect Ratio16 : 9
Resolution1365(H)
768(V) pixels
Pixel Pitch0.81(H)
0.81(V) mm
0.032"(H)
0.032"(V) inches
Color Processing4,096 steps, 68.7 billion colors
Signals
Synchronization RangeHorizontal : 15.5 to 110 kHz
(automatic : step scan)
Vertical : 50.0 to 120 Hz
(automatic : step scan)
Input SignalsRGB, NTSC (3.58/4.43), PAL (B,G,M,N),
PAL60, SECAM, HD*1, DVD*1, DTV*1
Input Terminals (VIDEO1 and...

E-2
Table of Signals Supported
Supported resolution•When the screen mode is NORMAL, each signal is converted to a 1024 dots
768 lines signal. (Except for *2, 3, 4)
•When the screen mode is TRUE, the picture is displayed in the original resolution.
•When the screen mode is FULL, each signal is converted to a 1365 dots
768 lines signal. (Except for *
3)Computer input signals supported by this system
  Screen modeDots 
 lines
640
400
640
480
848
480
852
480*
1
800
600
1024
768
1152
864
1280
768
1280
768*
9...

E-3
Important Information
Warning
Apparatus shall not be exposed to dripping or splashing and
that no objects filled with liquids, such as vases, shall be
placed on apparatus.
To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
This is a Class A product. In a domestic environment, this
product may cause radio interference in which case the user
may be required to take adequate measures.
*1 Only when using a graphic accelerator board that is capable of...

ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
ITALIANO
Operation Manual
(Enhanced split screen Model)
For the specifications of your plasma
monitor, refer to “Model Information”.

У
 

E-2
Precautions
Please read this manual carefully before using your plasma monitor
and keep the manual handy for future reference.
       CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER. NO
USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol warns the user that uninsulated
voltage within the unit may have sufficient
magnitude to cause electric shock. Therefore, it
is dangerous to make any kind of contact...

E-3
Contents
Contents of the Package

 Plasma monitor

 Power cord

 Remote control with two AAA Batteries

 Manuals (Model Information and Operation)

 Safety metal fittings*

 Ferrite cores, bands

 Cable clamps
* Contents will differ according to the model.
* These are fittings for fastening the unit to a wall to prevent
tipping due to external shock when using the stand
(optional). Fasten the safety fittings to the holes in the
back of the monitor using the safety fitting mount screws
(see page...

E-4
50mm (2)
50mm (2) 50
mm (2)
Wall
Wall
50mm (2)
50mm (2)
You can attach your optional mounts or stand to the plasma monitor in one of the following two ways:
* While it is upright. (See Drawing A)
* As it is laid down with the screen face down (See Drawing B). Lay the protective sheet, which was wrapped around the
monitor when it was packaged, beneath the screen surface so as not to scratch the screen face.
* Do not touch or hold the screen face when carrying the unit.
• This device cannot be...

E-5
Note:
1. The VIDEO1 and RGB1 terminals can be used for either INPUT or OUTPUT.
When LOOP OUT is ON, do not connect an OUTPUT signal from another unit, that will place an extraordinary
load on the other unit and may damage it.
2. LOOP OUT can not be turned ON while signals are input to the RGB1 terminal.
3. LOOP OUT can be turned ON while signals are input to the RGB1 terminal if the POWER is switched ON.
Information
• To loop signals out to another plasma display, set the LOOP OUT to ON.
• To create...

E-6
Approx.
7m / 23ft 
MENU/ ENTERINPUT SELECT
DOWN UP LEFT/-RIGHT/+
/EXITVOLUME
MENU/ ENTERINPUT SELECT
DOWN UP LEFT/-RIGHT/+
/EXITVOLUMEOPTION1
EXIT OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
HD SELECT
INPUT SKIP
ALL RESET:     RGB
:     RGB
:     AUTO
:     1080B
:     OFF
:     OFF
      1024768
SEL.RETURNMENU/ENTEROK
Top side
Bottom side 90°
Caution on when the plasma monitor is installed vertically
•Use the optional unit. Contact your store of purchase when installing.
•Rotate 90° clockwise as seen from...