NEC Plasmasync 50xc10 Users Manual

English-8
Using the Remote: 
Install the remote control batteries.
Th  e remote control is powered by AA batteries. To install or 
replace batteries:
  A.  Press and slide to open the cover.
  B.  Align the batteries according to the (+)    
    and (–) indications inside the case.
  C.  Replace the cover.
CAUTION: Incorrect usage of batteries can result in leaks or 
bursting. NEC recommends the following battery use:
Place “AA” size batteries matching the (+) and (-) signs 
on each battery to the (+)...

English
English-9
Part Names and Functions
Control Panel
 1)  POWER
Switches the power on/standby.
 2)  MUTE
Switches the audio mute ON/OFF.
 3)  INPUT
Switches between input sources.
Acts as SET button within the OSD menu.
 4)  PLUS (+)
Increases the setting adjustment within OSD menu.
 5)  MINUS (-)
Decreases the setting adjustment within OSD menu. 
 6)  UP ( )
Increases the volume level when the OSD is off .
Moves area up to select which setting to is to be adjusted 
within OSD menu.
 7)  DOWN ( )...

English-10
EXTERNAL CONTROLOUT
2
IN
DVD/HD3S-VIDEO IN
DVI AUDIO3R
L(MONO)
R
L
(MONO)
R
L
(MONO)AUDIO2 AUDIO1 VGAY Cr/Pr Cb/Pb
DVD/HD1 DVD/HD2
IN
VIDEO
AC IN RLSPEAKER (S)
1
34567810
912
111314
Part Names and Functions
  1)  EXTERNAL CONTROL OUT (D-Sub 9 pin)
Connect RS-232C output to a second monitor. 
  2)  EXTERNAL CONTROL (D-Sub 9 pin)
Connect RS-232C input to external equipment such as a 
PC in order to control RS-232C functions. 
 3)  DVD/HD3 (HDMI)
Input digital HDMI signals.
 4)  DVI
Input digital...

English
English-11
Part Names and Functions - continued
 1)  POWER ON/STANDBY
Switches the power on/standby. 
*If the Power Indicator on the display is not glowing, 
then no controls will work.
 2)  VIDEO
Switches the input signal to the VIDEO source.
 3)  RGB
Switches the input signal to the RGB source.
 4)  DVD/HD
Switches the input signal to the DVD/HD source. 
 5)  PICTURE MODE
Selects Picture Mode: [STANDARD], [BRIGHT],  
[CINEMA1], [CINEMA2], [DEFAULT]. 
  STANDARD: for viewing in a bright room...

English-12
POWER
To turn the unit ON and OFF:
1.  Plug the power cord into an AC outlet.
2.  Press the Power button (on the unit).
 Th  e monitor's ON/STANDBY indicator turns red and 
the unit will be in STANDBY mode.
3.  Press the POWER ON button on the remote control. Th e 
ON/STANDBY indicator will turn green when the unit 
is active.
4.  Press the STANDBY button (on the remote) or the 
Power button (on the unit) to turn off   the monitor.
DISPLAY
To check display settings press the DISPLAY button...

English
English-13
REMOTE CONTROL ID
Th  e remote control included with the display can be used 
to control up to 26 individual monitors using what is 
called the REMOTE CONTROL ID mode. Th e REMOTE 
CONTROL ID mode works in conjunction with the Monitor 
ID, allowing control of up to 26 individual monitors. For 
example: if there are many monitors being used in the same 
area, a remote control in normal mode would send signals to 
every monitor at the same time Figure 1. Using the remote 
in REMOTE...

English-14
On-Screen Display (OSD)
Using the OSD
Use the Remote Control or the control panel on the front 
of the unit to enter the on-screen display menu to adjust 
settings.
1.  Press the MENU button on the remote or the EXIT 
button on the Control Panel.
2.  Use the up and down buttons to select the desired menu.
3.  Press the SET button to select a sub-menu or item for 
adjustment.4.  Change the setting or adjustment by pressing  the + and 
- buttons on the Control Panel or the Remote Control.
5....

English
English-15
On-Screen Display (OSD)
Main Menu Sub Menu Sub Menu2 Explanation Default Reset
PICTURE PICTURE MEMORY Store picture menu settings and input terminal information. The 
memory number is 1-6.
The PICTURE MEMORY screen appears when the SET button is 
pressed on the PICTURE MEMORY MENU.OFF YES
CONTRAST Adjusts the image brightness in relationship to the white level. 
Press + or - to adjust.50 YES
BRIGHTNESS Adjusts the image brightness in relationship to the background. 
Press + or - to...

English-16
On-Screen Display (OSD)
Main Menu Sub Menu Sub Menu2 Explanation Default Reset
AUDIO BASS Adjusts the low frequency sound. Press + or - to adjust. 0 YES
TREBLE Adjusts the high frequency sound. Press + or - to adjust. 0 YES
BAL ANCE Adjusts the balance of L / R volume.  Press + or - to adjust. 0 YES
AUDIO INPUT1 Select which audio input to use with the video source. VIDEO1 YES
AUDIO INPUT2DVD/HD1 YES
AUDIO INPUT3VGA YES
DVD/HD3 INPUTHDMI YES
SCREEN ASPECT MODE Selects aspect ratio of the...

English
English-17
On-Screen Display (OSD)
Main Menu Sub Menu Sub Menu2 Explanation Default Reset
SET UP
(continued)BACK GROUND Chooses the brightness of background when there is no input 
signal present.GRAY YES
SIDE MASK Adjusts the color of the side mask when a 4 : 3 image is displayed.
Press + button, the bar will become lighter.
Press - button, the bar will become darker.3YES
OSD DISPL AY OSD ON : Information about inputs, screen size, etc. is shown.
OFF: No information is shown.ON YES
OSD...