NEC Plasmasync 50xc10 Users Manual

PlasmaSync 42XC10
PlasmaSync 50XC10
PlasmaSync 60XC10
English
User’s Manual
 

Package Contents
Plasma Monitor
Remote control and AA Batteries
Power cord
Users Manual (CD-ROM) 
Start Up Guide (Paper / CD-ROM)
Main Power Switch cover and screw
Cable clamps •
•
•
•
•
•
•
 

Important Safety Instructions ..............................................................................................................English-1
Important Information ...........................................................................................................................English-2
Safety Precautions and Maintenance ...................................................................................................English-3
Recommended Use...

English
English-1
Read Before Operating Equipment.
1.   Read these instructions.
2.  Keep these instructions.
3.   Heed all warnings.
4.   Follow all instructions.
5.   Do not use this apparatus near water.
6.   Clean only with a dry cloth.
7.   Do not block any of the ventilation openings. Install in 
accordance with the manufacturer's instructions.
8.   Do not install near any heat sources such as radiators, 
heat registers, stoves, or other apparatus (including 
amplifi ers) that produce heat.
9....

English-2
WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT USE THIS 
UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS 
CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING 
TO QUALIFIED SERVICE PERSONNEL.
CAUTION
CAUTION:  TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL 
SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT,...

English
English-3
Safety Precautions
and Maintenance
FOR OPTIMUM PERFORMANCE, PLEASE NOTE 
THE FOLLOWING WHEN SETTING UP AND 
USING THE MONITOR:
Th  e plasma display's panel is made up of fi ne picture 
elements (cells), of which more than 99.99 percent are active 
cells. Some cells may not produce light or remain constantly 
lit. For safe operation and to avoid damaging the unit, read 
carefully and observe the following instructions. 
DO NOT OPEN THE MONITOR. Th  ere are no user-
serviceable parts...

English-4
Recommended Use
CAUTION
CORRECT PLACEMENT AND ADJUSTMENT OF 
THE MONITOR CAN REDUCE EYE, SHOULDER AND 
NECK FATIGUE. CHECK THE FOLLOWING WHEN 
POSITIONING THE MONITOR:
For optimum performance, allow 20 minutes for warm-
up.
Rest your eyes periodically by focusing on an object at 
least 5 feet away. Blink oft en.
Position the monitor at a 90 degree angle to windows 
and other light sources to minimize glare and 
refl ections.
Clean the monitor surface with a lint-free, nonabrasive 
cloth. Avoid...

English
English-5
Recommended Use - continued
To avoid or minimize image 
retention:
 
Like all phosphor-based display devices and all other gas 
plasma displays, plasma monitors can be susceptible to image 
retention under certain circumstances. Certain operating 
conditions, such as the continuous display of a static 
image over a prolonged period of time, can result in image 
retention if proper precautions are not taken. To protect 
your investment in this plasma monitor, please adhere to the...

English-6
Using Optional Stand/Mounts
An optional stand or mounting apparatus can be installed 
either while the unit is in the upright position or while the 
unit is face-down.
To install the stand while in the upright position, lower the 
monitor onto to the feet as shown (Figure 1). Use the handles 
to support the display while lowering the support holes 
underneath the display onto the feet.
If stand or mounting apparatus is to be installed while the 
unit is face-down (Figure 2), be sure to lay the...

English
English-7
Mounting on Ceiling
Ensure that the ceiling is sturdy enough to support the 
weight of the unit and the mounting apparatus over 
time, against earthquakes, unexpected vibrations, and 
other external forces.
Be sure the unit is mounted to a solid structure within 
the ceiling, such as a support beam. Secure the monitor 
using bolts, spring lock washers, washer and nut.
DO NOT mount to areas that have no supporting 
internal structure. DO NOT use wood screws or anchor 
screws for...