NEC Np901w Projector User Manual

97
Selecting Aspect Ratio and p osition for Screen [S CREEN]
SCREEN  Ty PE   .......Select  one  of  two  options:  4:3  SCREEN  or  WIDE  SCREEN  for  the  screen  to  be  used.  See  also  [ A SPECT  
R ATIO
].
(→ page 83)
P
OSITION
 
..............
This feature allows you to adjust the vertical position of the image when WIDE SCREEN has been selected 
for the screen type.
When WIDE SCREEN has been selected there is no-signal area above and below the image.
NOTE: This option is available only when...

98
6. Using On-Screen Menu
Using Multi-Screen Compensation [MULTI-SCREEN COMP.]
This feature allows you to match images projected from multiple projecto\
rs that are placed in parallel.
MODE  ....................OFF: Turns off this function to return to the normal brightness.
ON:  Turns  on  this  function  to  make  the  screen  darker.  The  [BRIHGTNESS]  and  the  [CONTRAST]  can  be 
adjusted.
CONTRAST   ............Adjusts the bright part of the picture.
BRIGHTNESS   .........Adjusts the dark part...

99
6. Using On-Screen Menu
[INSTALLATION(2)]
[NETWORK SETTINGS]
This feature allows you to set various setting items when the projector \
is used on your network.
Important•   Consult with your network administrator about these settings.
•
  The NP905/NP901W series projectors distributed in some areas and countries do not come standard with 
the USB Wireless LAN Unit.
 
If you purchase the projector without the USB Wireless LAN Unit installed and need to present to the pro
-
jector via a wireless...

100
6. Using On-Screen Menu
To receive error messages or information on the remaining lamp life via \
e-mail:1.   On the [ M
AIL
] tab, select [A LERT  M AIL] and press the ENTER button. A check mark will be placed. 
2.
 
Set  [ S
ENDER
’
S
  A
DDRESS
],  [ SMTP  S ERVER   N AME]  and  [R ECIPIENT ’ S   A DDRESS].  Select  [OK]  and 
press the ENTER button.
 
(
→ page 107)
To execute [ E ASY  C ONNECTION] using Image Express Utility 2.0:
The [E ASY  C ONNECTION] is a mode that can abbreviate the...

101
[pROJECTOR  N A m E]
Specify a unique projector name. Press  to display the software keyboard and type in. Up to 16 alphanumeric 
characters, signs and symbols can be used. After entering a name, select\
 [OK] and press the ENTER button.
NOTE: The [PROJECTOR NAME] will not be affected even when [RESET] is don\
e from the menu.
Using Software Keyboard
1 to 0 and
Characters  .......Use to type in password or keyword.
MODE  ....................Selects one of three modes for numbers, alphabet and...

102
6. Using On-Screen Menu
[WIRED]
Profiles (for LAN port [RJ-45]):
Up to two settings for the LAN port (RJ-45) can be stored in memory of\
 the projector.
Select [P ROFILE  1] or [P ROFILE  2] and then do settings for [DHCP] and the other options. 
After doing this, select [OK] and press the ENTER button. This will stor\
e your settings in memory.
To recall the settings from memory:
After selecting the [WIRED] tab, select the [PROFILE 1] or [PROFILE 2] f\
rom the [PROFILES] list.
Select [OK] and press...

10
6. Using On-Screen Menu
[WIRELESS]
PROFILES (for USB Wireless LAN unit):
To execute a wireless LAN easily using Image Express Utility 2.0, select\
 [ E ASY  C ONNECTION].
Up to two settings for the USB wireless LAN unit can be stored in memory\
 of the projector.
Select [P ROFILE  1] or [P ROFILE  2] and then do settings for [DHCP] and the other options. 
After doing this, select [OK] and press the ENTER button. This will stor\
e your settings in memory.
To recall the settings from memory:
After...

104
6. Using On-Screen Menu
[A DVANCED] menu
[CONNECTION] (required for wireless only)
SITE  S URVEY:
Displays a list of available SSIDs for wireless LAN on site. Select an S\
SID which you can access.
To select an SSID, highlight [SSID] and use the SELECT  to select [OK] and press the ENTER button.
 : Wireless access point
 : Ad Hoc PC
 : WEP or WPA enabled
SSID (Network name):
Enter  an  identifier  (SSID)  for  wireless  LAN  when  selecting  [ I NFRASTRUCTURE]  or  [A D   H OC]  in  [NETWORK...

105
[SECURITY] (required for wireless only)
SECURITY TYp E
Select encryption mode for secure transmission.
When [WEP] or [DISABLE] is selected in [SECURITY TYPE]:
Select this option whether using the WEP (Wired Equivalent Privacy) key for encryption or not. To use encryp-
tion, specify WEP key.
DISABLE  ................ Will not turn on the encryption feature.  y our communications may be monitored by someone.
WEP(64bit)  ............Uses 64-bit datalength for secure transmission.
WEP(128bit)...

10
6. Using On-Screen Menu
Using Software Keyboard to enter an encryption key
1.   Select one of [ K
E y 1
], [K E y 2], [K E y 3] and [ K E y 4] and press the ENTER button.
 
The software keyboard will be displayed.
 
2.   Use the SELECT   button to select one key and press the ENTER button.
3.
 
After finishing entering the WEP key, use the SELECT 
 button to select [OK] and press the EN-
TER button.
 
The software keyboard will disappear.
When [WPA-PSK], [WPA-EAP], [WPA2-PSK] or...