NEC Np901w Projector User Manual

87
6. Using On-Screen Menu
 Menu Descriptions & Functions [SETUP]
[BASIC]
Selecting Keystone m ode [K EYSTONE]
This feature allows you to correct keystone distortion.
Selecting this item will display the Keystone setting menu.
[AUTO KEYSTONE] will turn on the auto keystone feature.
Changes will be saved even when you turn off the projector.
You can correct vertical distortion manually from the menu. (→ page 28)
To do do, select [OFF] on the[AUTO KEYSTONE] screen.
NOTE: The [KEYSTONE] item is not...

88
6. Using On-Screen Menu
Selecting Cornerstone m ode [C ORNERSTONE]
 
This option allows you to correct trapezoidal distortion.
Selecting this item will display the Cornerstone adjustment screen. (→ page 38)
NOTE:  The [CORNERSTONE] item is not available when [KEYSTONE] or [GEOME\
TRIC CORRECTION] is selected.
Using the p I p /SIDE BY SIDE Function [ p I p /SIDE BY SIDE]
This function allows you to view two different signals simultaneously. (\
→ page 41)
MODE:
This option allows you to select two...

89
6. Using On-Screen Menu
Using the Wall Color Correction [W ALL  C OLOR]
 
This function allows for quick adaptive color correction in applications\
 where the screen material is not white.
The following nine options are available.
Setting Lamp m ode to Normal or Eco [ L A mp  mODE]
This feature enables you to select two brightness modes of the lamp: Normal and Eco modes. The lamp life can be 
extended by using the Eco mode. Selecting Eco mode decreases fan noise w\
hen compared to Normal mode.
Lamp...

90
6. Using On-Screen Menu
Using Off Timer [O FF  T I m ER]
1.  Select your desired time between 30 minutes and 16 hours:  O FF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00.
2.
 
Press the ENTER button on the remote control.
3.
 
The remaining time starts counting down.
4.
 
The projector will turn off after the countdown is complete.
NOTE:
•   To cancel the preset time, set [ O
FF
] for the preset time or turn off the power.
•
 
When the remaining time reaches 3 minutes before the projector is turned...

91
6. Using On-Screen Menu
Setting a new program timer
1.  On the PROGRAM TIMER screen, use the SELECT 
 or  button to select [SETTINGS] and press the EN-
TER button.
 
  t he [P r O gra M  list ] screen will be displayed.
NOTE: When the Program Timer is turned on, the [PROGRAM LIST] cannot be edited.
2. Select a blank program number and press the ENTER button.
 
  the [ edit ] screen will be displayed.
3.   Make settings for each item as required.
 
ACTIVE   ..................Place a check mark to...

92
6. Using On-Screen Menu
4.  Select [OK] and press the ENTER button.
  t his will complete the settings.
  You will be returned to the [P r O gra M  list ] screen.
NOTE:
•  Up to 30 different timer settings can be programmed.
• When [PROGRAM TIMER] is turned on, the [STANDBY MODE] setting is ignored.
• The Program Timer is executed on a set time basis, not in a program basis.
•  Once the program not marked with a check in [REPEAT] has been executed, the check mark in the [ACTIVE] check box will be...

9
6. Using On-Screen Menu
Deleting the programs
1.
  On  the  [PROGRAM  LIST]  screen,  select  a  program  number  you  want  to  delete  and  press  the  SELECT 
 
button.
2.
 
Press the SELECT 
 button to select [DELETE].
3.
 
Press the ENTER button.
  t
he confirmation screen will be displayed.
4. Select [
y
ES] and press the ENTER button.
  t
he program will be deleted.
   
t his will complete deleting the program.
Using [CORNERSTONE]
(→ page 38)
Using [ENTRY LIST]
(→ page 76)
Setting the...

94
6. Using On-Screen Menu
Logging Off Your p rojector [LOGOFF]
This feature allows you to log off your projector without turning it off\
.
Logging off your projector will prevent an unauthorized user from operat\
ing your projector.
To log off your projector, follow the steps below.
1.
  Press the MENU button and use the SELECT 
 button to highlight [SETUP].
 
2.   Use the SELECT  or the ENTER button to highlight [BASIC].
 
3.  Use the SELECT  button to highlight [LOGOFF], and press the ENTER...

95
6. Using On-Screen Menu
[MENU]
Selecting m enu Color [C OLOR  S ELECT]
You can choose between two options for menu color: color and monochrome.\
Turning On / Off Source Display,  m essage and Time [SOURCE DIS p LAY], [ m ESSAGE DIS p LAY], 
[TI m E DIS p LAY], [ID DIS p LAY]
SOURCE  DISPLA y   ...........  This option turns on or off input name display such as Computer 1, Computer 2, HDMI, Video, and No Input to be displayed on the top right of the screen.MESSAGE  DISPLA y ............  This option...

9
6. Using On-Screen Menu
[INSTALLATION(1)]
Selecting  p rojector Orientation [ O RIENTATION]
This  reorients  your  image  for  your  type  of  projection.  The  options  are:  desktop  front  projection,  ceiling  rear  projec-
tion, desktop rear projection, and ceiling front projection.
DESKTOP   FRONT
C EILING   REAR
D ESKTOP   REAR
C EILING   FRONT