NEC Np62 Projector User Manual

							

. Us  ng the V  ewer (NP  /NP  )
VIEWERSORT[NAME 	 (ABC..)] 	
(Note
	 1)
NAME 	 (ZYX..)
TYPE 	 (ABC..)
TYPE
	 (ZYX..)
DATE
	 (NEW)
DATE
	 (OLD)
SIZE
	 (LARGE)
SIZE
	 (SMALL) S e l e c t s
	 t h e 	 s o r t i n g 	 o r d e r 	 o f 	 t h e 	 s l i d e s 	 o r 	
thumbnails 	 for 	 slideshow.
USBREMOVE 	 USB 	 DEVICE
EXECUTE
Stops 	 the 	 USB 	 memory 	 inserted 	 into 	 the 	 pro-
jector.
	
Execute
	
this
	
menu
	
item
	
before
	
remov-
ing
	
the
	
USB
	
memory
	
from
	
the
	
projector.
Bluetooth 	 setting 	(Note	 2)
SEARCH 	 RESPONSE 	(Note	 2)OFF[ON] Selects 	 whether 	 to 	 answer 	 when 	 a 	 search 	
command 	 is 	 received 	 from 	 the 	Bluetooth
	 de-vice.
DEVICE
	
NAME
	
(Note 	 2)- Returns 	 a 	 device 	 name 	 specified 	 with 	 this 	
option 	 to 	 a 	 device 	 with 	Bluetooth
	 wireless 	
technology.
	
The
	
BD
	
address 	 (12 	 digits 	 not 	
including
	
“colon”)
	
of
	
Bluetooth® 	 USB 	 adaptor 	
is
	
used
	
as
	
the
	
default 	 name 	 of 	 the 	 device.
PASSKEY
	
(Note 	 2)OFF
[ON
	 (0000)]
CHANGE Selects 	 whether 	 to 	 do 	 authentication 	 and 	 en
-
cryption
	
when
	
a
	
device
	
with
	
Bluetooth
	
wire-
less
	
technology
	
is
	
connected.
	
The
	
authen-
tication
	
character
	
string
	
(1
	
to
	
8
	
characters) 	
can
	
be
	
changed
	
if
	
necessary.
BD
	
ADDRESS
	
(Note 	 2)– Displays 	 the 	 BD 	 address 	 of 	Bluetooth®
	 USB 	
adaptor
	
that
	
is
	
inserted
	
into
	
the 	 projector.
VERSION
FIRMWARE
Displays 	 the 	 firmware 	 version 	 of 	 the 	 Viewer.
DATA
FONT
Note 1: The [SORT] setting will be returned to [NAME(ABC..)] when the projector is turned off and then back on.
Note  2:  These  items  will  be  displayed  when  the  optional  Bluetooth®  USB  adaptor  (NP01BA)  is  inserted  into  the  projector.  (→
page 45) 
						

							
3
. Us  ng the V  ewer (NP  /NP  )
Enter

ng Characters
To 	 enter 	 or 	 change 	 [DEVICE 	 NAME] 	 and 	 [PASSKEY] 	 at 	 the 	 use 	 of 	Bluetooth®	 USB 	 adaptor, 	 use 	 the 	 character 	 en-
try
	
screen
	
(software
	
keyboard).
This
	
section
	
uses
	
an
	
example
	
of
	
entering
	
a
	
passkey
	
to
	
describe
	
how
	
to
	
enter
	
characters.
When
	
you
	
select
	
[CHANGE]
	
of
	
[PASSKEY]
	
from
	
the
	
[OPTIONS]
	
menu,
	
the
	
character
	
entry
	
screen
	
will
	
be
	
dis
-
played.
Enter  ng characters
1.  Press the  sele C t  ▼ button.
 
The cursor will move to the character type section. 
2.
 
Press the 
sele
C
t
 
◀ or ▶ button.
 
The character type will be changed in the order of [ABC], [abc], 
and [123].
3.   Move  the  cursor  to  select  the  character  type  section 
and press the 
sele C t  
▼ button.
 
The cursor will move to the character field.
4.
 
Move the cursor to select a character and press the  en
-
ter
 button.
 
The character will be displayed in the entry field.
5.
  a
fter completing entry, press the 
sele
C
t
 
▼ button and 
move the cursor to select [OK] and the 
enter  button.
 
The entry will take effect.
•
 
To  cancel,  move  the  cursor  to  select  [CANCEL]  and  press 
the ENTER button. 
Entry field 
						

							

. Us  ng the V  ewer (NP  /NP  )
Chang

ng characters 

n the entry field
1.   Press  the  sele C t  ▲  or ▼  button  to  move  the  cur-
sor to select  and .
 
The 
 and  will be changed to dark gray.
2.
 
Press the 
sele
C
t
 
◀ or ▶ button.
 
The  cursor  (I)  in  the  entry  field  will  be  moved  from 
side to side.
3.
 
Move the cursor ( i ) to the right of the character to 
be deleted.
4.
 
Press  the  sele C t  
▼  button  and  move  the  cursor 
to select [
delete
] and press the  enter  button.
 
The character in the entry field will be deleted.
•
 
To insert a space, move the cursor to select [SPACE] 
and press the ENTER button. 
						

							

. Us  ng the V  ewer (NP  /NP  )
❺ Using the Bluetooth® wireless technology to transmit images
Overv ew
Connecting 	 the 	 optional 	Bluetooth®	 USB 	 adaptor 	 (NP01BA) 	 to 	 the 	 USB 	 port 	 (Type 	 A) 	 of 	 the 	 projector 	 will 	 allow 	 you 	
to
	
transmit
	
images
	
wirelessly 	 from 	 your 	 computers 	 or 	 mobile 	 phones 	 with 	
Bluetooth	 wireless 	 technology 	 to 	 the 	
projector.
[Important]
•	 If	 you 	 remove 	 the 	Bluetooth®	 USB 	 adaptor 	 from 	 the 	 projector, 	 	 all 	 the 	 images 	 that 	 the 	 projector 	 received 	
will
	
be
	
deleted.
•	 When
	
the
	
projector 	 goes 	 into 	 the 	 standby 	 mode 	 or 	 when 	 the 	 AC 	 power 	 supply 	 is 	 turned 	 off, 	 all 	 the 	 re
-
ceived
	
images
	
will
	
be
	
deleted.
•	 Received
	
images
	
cannot
	
be
	
stored
	
to
	
the
	
projector.
•	 The
	
maximum
	
available
	
space
	
for
	
received
	
images
	
in
	
all
	
is
	
6MB.
	
One
	
image
	
must
	
not
	
exceed
	
2.5MB
	
in 	
size.
•	 If 	 the 	 projector 	 is 	 receiving 	 images 	 beyond 	 the 	 space 	 limit 	 during 	 the 	 transmission, 	 the 	 oldest 	 image 	 will 	
be 	 deleted 	 and 	 will 	 receive 	 a 	 new 	 image. 	 When 	 the 	 image 	 is 	 received, 	 a 	 confirmation 	 message 	 will 	 not 	 be 	
displayed.
Typ cal Spec  ficat  ons of Bluetooh® USB Adaptor
Model	 nameNP01BA
StandardBluetooth 	 Ver.2.0+EDR
Transmission
	
method FH-SS
	 (Frequency-Hopping 	 Spread 	 Spectrum)
Frequency
	
range 2.4GHz
	 band 	 (2402-2480MHz)
Transmission
	
output 2.5mW,
	 Class2
Supported
	
profiles BIP
	 (Basic 	 Imaging 	 Profile)
OPP
	 (Object 	 Push 	 Profile)
Communication
	
distance Approx.
	 10m/33 	 feet 	 (*The 	 communication 	 distance 	 may 	 vary 	 depending 	 on 	 the 	 environ
-ment.)
Dimensions17.6 	 mm/0.69”(Width) 	 x 	 9.0 	 mm/0.35”(Height) 	 x 	 56.3 	 mm/2.22”(Depth)
Weight6g/0.2 	 oz
Use 	 environment Temperature:
	 0°C 	 to 	 40°C/ 	 32°F 	 to 	 104°F
Humidity:
	 20 	 to 	 80% 	 (non-condensing)
Storage
	 environment Temperature:
	 -10°C 	 to 	 60°C/14°F 	 to 	 140°F
Humidity:
	 20 	 to 	 80%(non-condensing)
•	 Make	 sure 	 beforehand 	 that 	 your 	 transmission 	 device 	 supports 	 the 	 BIP 	 or 	 OPP 	 profile 	 according 	 to 	 the 	 user’s 	
manual 	 supplied 	 with 	 your 	 transmission 	 device.
•	Bluetooth®	 USB 	 adaptor 	 (NP01BA) 	 is 	 for 	 the 	 exclusive 	 use 	 of 	 our 	 projectors. 
						

							

. Us  ng the V  ewer (NP  /NP  )
Operat ng Procedures
1.  t urn on the projector. 
2.   s elect [V ie W er ] from the [ s OU r C e ] menu.
•
  Another way to select the [VIEWER] source is to press the VIEWER button on the remote control.
•
  When  the  slide  screen  is  displayed  from  the  Viewer,  press  the  EXIT  button  to  change  it  to  the  thumbnail 
screen.
•
 
Make sure that the drive display shows“Bluetooth”on the top left of the thumbnail screen.
3.
  i
nsert the Bluetooth® U s B adaptor into the U s B port of the projector.
•
 
Insert the Bluetooth® USB adaptor with the [ 
 ] side facing upward.
NOTE: Do not remove the Bluetooth® USB adaptor while the message [INITIALIZING Bluetooth DEVICE] is being displayed.
LAMPSTATUSPOWER
SOURCE
AUTOADJ.SELECTON/STAN D BYFOCUSVIDEO IN
COMPUTER IN
PC CONTRO LAUDIO INS-VIDEO IN
USB
4.  t ransmit images wirelessly from your Bluetooth computers or mobile phones to the projector
•   Select the device name of the projector and enter your passkey on your transmission device.
  The default device name of the projector is “BD address of inserted Bluetooth® USB adaptor”. The default 
passkey is “0000”.
•
 
When the projector receives images, those images will be shown on the thumbnail screen.
•
 
If  the  projector  receives  unsupported  images,  the  message  [FILE  FORMAT  IS  INCORRECT.]  will  be  dis
-
played.
5.
 
Use the Viewer of the projector to project images. •
 
After receiving images, operate the Viewer in the same way as the one for USB memory. 
 
(
→ ”3. Operating the slide screen” on page 40), (→ “4. Operating the thumbnail screen” on page 40)
•
 
To delete the received images, press the MENU button in the thumbnail screen to select [DELETE…] from 
the pop-up menu.
6.
  f
inish using the Bluetooth® U s B adaptor.
•
 
Remove the Bluetooth® USB adaptor from the projector.
LAMPSTATUSPOWER
SOURCE
AUTOADJ.SELECTON/STAND  BYFOCUSVIDEO IN
COMPUTER IN
PC CONTRO LAUDIO INS-VIDEO IN
USB 
						

							
7
 . Us  ng the V  ewer (NP  /NP  )
Troubleshoot ng on Us  ng the Bluetooth w  reless technology to transm  t   mages
ProblemCheck These Items
Cannot the projector, or transmission rate is too slow•   Check if the 
Bluetooth® USB adaptor is fully inser ted into the USB por t of the projector, and make sure that the Bluetooth® USB adaptor is displayed in the thumbnail screen. (→ page 46)
•
 
Check if the communication distance is too far or if there is any obstacle between the Bluetooth® USB adap-tor and your transmission device. The maximum line-of-sight distance is 10 m/33 feet. (*The communica-tion distance may var y depending on the environment.) (→ page 45)
•
 
Check  if  the  projector  is  used  near  a  device  generating  electric  wave  such  as  a  wireless  L AN  device  or  mi-crowave oven. These devices may cause inter ference to the radio communications.
•
 
Check  if  [SEARCH  RESPONSE]  is  turned  [ON].  If  [SEARCH  RESPONSE]  is  turned  [OFF],  the  search  screen 
cannot be displayed. Should this happen, turn [SEARCH RESPONSE] to [ON] or specify the BD address in [BD ADDRESS]. (→ page 42)
•
 
Check if the Bluetooth wireless technology function is turned of f with your transmission device. If so, turn it on.
Cannot connect to the projector •   Check if two or more transmission devices is sending data to the projector. The projector does not have the capabilit y  of  receiving  data  from  multiple  devices.  Wait  until  data  transmission  from  another  transmission device is completed.
•
 
Check  if  a  passkey  is  set  on  the  projector.  If  so,  the  passkey  is  also  required  to  be  correctly  set  on  your 
transmission device. (→ page 42)
•
 
Check if your transmission device suppor ts the BIP or OPP profile. (→ page 45) 
						

							
8
6. Using On-Screen Menu
❶ Using the Menus
1.   Press the M en U button on the remote control or the projector cabinet to display the menu.
 
NOTE: The commands such as ENTER, EXIT, ▲▼, ◀▶ in the bottom show available buttons for your operation.
2.
 
Press the 
sele
C
t
 
◀▶ buttons on the remote control or the projector cabinet to display the submenu.
3.
 
Press  the 
enter
  button  on  the  remote  control  or  the  projector  cabinet  to  highlight  the  top  item  or  the 
first tab.
4.
 
Use  the  sele C t  
▲▼  buttons  on  the  remote  control  or  the  projector  cabinet  to  select  the  item  you  want 
to adjust or set.
 
You can use the  sele C t  
◀▶ buttons on the remote control or the projector cabinet to select the tab you 
want.
5.
 
Press the  enter  button on the remote control or the projector cabinet to display the submenu window.
6.
  a djust  the  level  or  turn  the  selected  item  on  or  off  by  using  the  sele C t  
▲▼◀▶  buttons  on  the  remote 
control or the projector cabinet.Changes 	 are 	 stored 	 until 	 you 	 adjust 	 it 	 again.
7.
  r epeat steps 2 -6 to adjust an additional item, or press the  e X it  button on the remote control or the pro
-
jector cabinet to quit the menu display.
NOTE: When a menu or message is displayed, several lines of information may be lost, depending on the signal or settings.
8.   Press the M en U button to close the menu.
  t o return to the previous menu, press the  e X it  button. 
						

							
9
 . Us  ng On-Screen Menu
➋ Menu Elements
Slide bar
Solid triangle
Highlight
Tab
Radio button
High Altitude symbol
Menu w  ndows or d  alog boxes typ  cally have the follow  ng elements:
Highlight  .............................Indicates the selected menu or item. 
Solid triangle   ......................Indicates fur ther choices are available. A highlighted triangle indicates the item is active. 
Tab  ......................................Indicates a group of features in a dialog box. Selecting on any tab brings its page to the front.
Radio button   ......................Use this round button to select an option in a dialog box.
Source  ................................Indicates the currently selected source.
Off Timer remaining time   ...Indicates the remaining countdown time when the [OFF TIMER] is preset.
Slide bar  .............................Indicates settings or the direction of adjustment.
Key Lock symbol   ................Indicates the [CONTROL PANEL LOCK] is enabled.
Thermometer symbol.........Indicates the lamp mode is forcibly set to [ECO] mode because the internal temperature is too 
high.
High Altitude symbol   .........Indicates the [FAN MODE] is set to [HIGH ALTITUDE] mode.
Source
Available buttons
Thermometer symbol
Key Lock symbol
Off Timer remaining time 
						

							
0
 . Us  ng On-Screen Menu
➌ List of Menu Items
Some	 menu 	 items 	 are 	 not 	 available 	 depending 	 on 	 the 	 input 	 source.
Menu	 ItemDefaultOptions
SOURCE
COMPUTERVIDEOS-VIDEO
VIEWER
	 (NP62/NP52)
ADJUST
BASIC
PRESET
1-6
DETAIL
	
SETTINGS
REFERENCE* HIGH-BRIGHT, 	 PRESENTATION,
VIDEO, 	 MOVIE, 	 GRAPHIC, 	 sRGB
GAMMACORRECTION*DYNAMIC, 	 NATURAL, 	 BLACK 	 DETAIL
COLORTEMPERATURE*5000/6500/7800/8500/9300/10500
BrilliantColor*OFF, 	 MEDIUM, 	 HIGHCONTRASTBRIGHTNESSSHARPNESSCOLORHUEVOLUMERESET
IMAGEOPTIONS
CLOCK*PHASE*HORIZONTAL*VERTICAL*
ASPECT
	
RATIO* NORMAL, 	 WIDE 	 ZOOM, 	 CINEMA, 	 NATIVE
CINEMA
	
POSITION
NOISE
	
REDUCTION
OFF OFF, 	 LOW, 	 MEDIUM, 	 HIGH
TELECINE 2-2/2-3 	AUTOOFF, 	 2-2/2-3 	 AUTO, 	 2-2 	 ON, 	 2-3 	 ON
SETUP
GENERALAUTO 	 KEYSTONE
ON
OFF, 	 ONKEYSTONE
KEYSTONE
	 SAVEOFFOFF, 	 ON
WALL
	
COLOR
OFF OFF, 	 WHITEBOARD, 	 BLACKBOARD, 	
BLACKBOARD(GRAY), 	 LIGHT 	 YELLOW, 	 LIGHT 	
GREEN, 	 LIGHT 	 BLUE, 	 SKY 	 BLUE, 	 LIGHT 	
ROSE, 	 PINK
LAMP
	
MODE
NORMALNORMAL, 	 ECO
LANGUAGE
ENGLISH, DEUTSCH, FR ANÇAIS, ITALIANO, ESPAÑOL, SVENSK A, 日本語 , DANSK, PORTUGUÊS, ČEŠTINA, MAGYAR, POLSKI, NEDERLANDS, SUOMI, NORSK, TÜRKÇE, РУССКИЙ , ع ربي, ΕΛ ΛΗΝΙΚ Α , 中文 , 한국어
I N S TA L L A-TION
ORIENTATIONDESKTOP	FRONTDESKTOP	 FRONT, 	 CEILING 	 REAR, 	 DESKTOP 	
REAR, 	 CEILING 	 FRONT
CONTROL
	
PANEL
	
LOCK
OFF OFF, 	 ONSECURITYOFFOFF, 	 ON
MENU
	
COLOR
	
SELECTCOLOR COLOR, 	 MONOCHROME
MENU
	
DISPLAY
	
TIMEAUTO
45 	 SEC MANUAL /AUTO
	 5 	 SEC/AUTO 	 15 	 SEC/AUTO 	 45 	SECBACKGROUNDLOGOBLUE, 	 BLACK, 	 LOGO
COMMUNICATION
	
SPEED38400bps4800bps/9600bps/19200bps/38400bps
CONTROL
	
ID CONTROL
	
ID
	
NUMBER1 1 	 - 	 254
CONTROL
	
IDOFF OFF, 	 ON
ID
	
DISPLAYON OFF, 	 ON
OPTIONS
	
(1) AUTO 	 FOCUS
ON
OFF, 	 ON
FAN
	
MODEAUTO AUTO, 	 HIGH, 	 HIGH 	 ALTITUDE
COLOR
	
SYSTEM
VIDEOAUTO A U T O , 	 N T S C 3 . 5 8 , 	 N T S C 4 . 4 3 , 	 PA L , 	 PA L- M , 	
PAL-N, 	 PAL60, 	 SECAM
S-VIDEOAUTOA U T O , 	 N T S C 3 . 5 8 , 	 N T S C 4 . 4 3 , 	 PA L , 	 PA L- M , 	
PAL-N, 	 PAL60, 	 SECAM
BEEPONOFF, 	 ON
*	 The 	 asterisk 	 (*) 	 indicates 	 that 	 the 	 default 	 setting 	 varies 	 depending 	 on 	 the 	 signal. 
						

							

. Us  ng On-Screen Menu
SETUPOPTIONS(2) OFF 	 TIMER
OFFOFF/0:30/1:00/2:00/4:00/8:00/12:00/16:00
STANDBY
	
MODENORMALNORMAL, 	 POWER-SAVING
AUTO
	
POWER
	
ON
	
(AC)OFF OFF, 	 ON
AUTO
	
POWER
	
ON
	
(COMP.)OFF OFF, 	 ON
AUTO
	
POWER
	
OFFOFFOFF/0:05/0:10/0:20/0:30
DEFAULT
	
SOURCE
	
SELECT
LAST L AST, 	 AUTO, 	 COMPUTER, 	 VIDEO, 	 S -VIDEO, 	
VIEWER 	 (NP62/NP52)
INFO.
USAGETIMELAMP 	 LIFE 	 REMAINING
LAMP 	 HOURS 	 USED
SOURCEHORIZONTAL 	 FREQUENCY
VERTICAL 	 FREQUENCY
SIGNAL 	 TYPE
RGB, 	 COMPONENT, 	 VIDEO, 	 S-VIDEO, 	 HDTV
VIDEO 	 TYPE N T S C , 	 N T S C 3 . 5 8 , 	 N T S C 4 . 4 3 , 	 PA L , 	 PA L- M , 	
PAL-N, 	 PAL60, 	 SECAM
SYNC 	 TYPE SEPARATE
	 SYNC, 	 COMPOSITE 	 SYNC, 	 SYNC 	
ON 	 GREEN, 	 SYNC 	 ON 	 VIDEO
SYNC
	 POLARITY
SCAN
	 TYPE INTERLACE,
	 NON-INTERLACE
VERSION
PRODUCT
SERIAL	 NUMBER
FIRMWAREDATA
CONTROL 	 ID
RESET CURRENT 	 SIGNAL
ALL 	 DATA
CLEAR 	 LAMP 	 HOURS