NEC NP1000 Projector User Manual

61
5. Using the Viewer
0000.jpg0001.jpg0002.jpg 3 Files
Slot 1
RECYCLED
PICTURE
1/3  0000.jpg 60KB 08/21/2005  06/29  263KBselect :  ENTER
?
Highlight .................................. Indicates the selected folder or drive.
List of folders .......................... Indicates folders contained on a PC card or USB memory.
Information .............................. Indicates information of the selected file or folder.
Folder: folder name, creation date (month/day/year), creation time (hour/minute).
File:...

62
5. Using the Viewer
Setting Option for Viewer
Play Mode:
Manual .................. Views a slide manually when the Viewer source is selected.
Auto ...................... Plays back slides automatically when the Viewer source is selected.
Interval:
Specifies interval time between 5 and 300 seconds.
Start:
Specifies start screen when the Viewer source is selected.
Show Thumbnails:
Selecting the Viewer source will display a list of thumbnails of graphic files stored in the PC card or USB memory
when [On]...

63
Exiting Viewer
To exit Viewer, switch to another input such as Computer 1, Computer 2, Computer 3, Component, Video, S-Video or
LAN.
*To switch to another input, there are two ways:
*Press the COMPUTER 1, COMPUTER 2, COMPUTER 3, COMPONENT, VIDEO, S-VIDEO or LAN button on
the remote control.
*Press the MENU button on the remote control to display the Viewer menu. Press the MENU button again to
display the main menu and select the input from the [Source] submenu.
With this function it is possible to...

64
5. Using the Viewer
 Changing Background Logo
You can change the default background logo using the Viewer feature.
NOTE: File size must be 256KB or less. File formats other than JPEG, BMP, non-interlaced GIF or non-interlaced PNG are not
available.
Preparation: Store JPEG or BMP files (JPEG, BMP, non-interlaced GIF or non-interlaced PNG files) in a PC card or
USB memory inserted into your PC and insert the PC card into the projectors slot or USB memory into the projectors
USB port.
1. Press the...

65

 Using the Menus
1. Press the MENU button on the remote control or the projector cabinet to display the menu.
NOTE: The commands such as , ENTER, EXIT in the gray bar show available buttons for your operation.
2. Press the SELECT 
 buttons on the remote control or the projector cabinet to display the submenu.
3. Press the ENTER button on the remote control or the projector cabinet to highlight the top item or the first
tab.
4. Use the SELECT 

 buttons on the remote control or the projector...

66
 Menu tree
Menu Item
Source Computer 1, Computer 2, Computer 3, Component, Video, S-Video, Viewer, LAN, Entry List
Adjust Picture Mode Standard, Professional
Preset 1 to 6
Detail Settings GeneralReference High-Bright, Presentation, Video,
Movie, Graphic, sRGB
Gamma CorrectionDynamic, Natural, Black Detail
Color Temperature5000, 6500, 7800, 8500, 9300, 10500
White BalanceBrightness RGB, Contrast RGB
Color CorrectionRed, Green, Blue,Yellow, Magenta,
Cyan
Brightness
Contrast Manual, Auto
Sharpness...

67
6. Using On-Screen Menu
Menu Item
Setup Installation Orientation Desktop Front, Ceiling Rear, Desktop Rear, Ceiling Front
Screen Screen Type: 4:3, 16:9 / Position
LAN Mode Built-in Profiles: Profile 1, Profile 2
DHCP: On, Off
IP Address
Subnet Mask
Gateway
DNS Configuration
Reconnect
PC Card Profiles: Easy Connection, Profile 1, Profile 2
DHCP: On, Off
IP Address
Subnet Mask
Gateway
DNS Configuration
Advanced:
Network Type: Site Survey, SSID, Mode, Channel
WEP: WEP, Key Select, Key 1-4
Reconnect...

68
 Menu Elements
Slide bar
Solid triangle
Highlight
Ta b
Radio button
Check box
Cancel button
OK button
Menu windows or dialog boxes typically have the following elements:
Highlight ................ Indicates the selected menu or item.
Solid triangle ......... Indicates further choices are available. A highlighted triangle indicates the item is active.
Tab........................ Indicates a group of features in a dialog box. Selecting on any tab brings its page to the front.
Radio button ......... Use...

69
6. Using On-Screen Menu
 Menu Descriptions & Functions [Source]
Computer 1 and 2
Selects the computer connected to your COMPUTER 1 or COMPUTER 2 input connector signal.
NOTE: An optional component cable (Component V or ADP-CV1 cable) is needed for a component signal.
Computer 3 (RGB Digital)
Selects the computer connected to your COMPUTER 3 (DVI-D) connector.
Component
Selects what is connected to your COMPONENT IN (Y, Cb/Pb, Cr/Pr).
Video
Selects what is connected to your VIDEO input-VCR, laser disc...

70
6. Using On-Screen Menu
[Entry List]
Use the SELECT 
 buttons on your remote control or the projector cabinet to select the signal and press the
ENTER button on the remote control or the projector cabinet to display the [Entry Edit Command] screen.
Entering the Currently Projected Signal into the Entry List
1. Display the Entry List.
2. Use the SELECT 

 or  button on your remote control or the projector cabinet to select any number and
press the ENTER button on the remote control or the projector...