NEC NP1000 Projector User Manual

41
 Correcting Horizontal and Vertical Keystone Distortion (Cor-
nerstone)
Use the 3D Reform feature to correct keystone (trapezoidal) distortion to make the top or bottom and the left or right
side of the screen longer or shorter so that the projected image is rectangular.
4. Convenient Features
Projected image
Cornerstone
1. Press and hold the 3D REFORM button for a minimum of 2 seconds to reset current adjustments.
Current adjusments for [Keystone] or [Cornerstone] will be cleared.
2. Project an...

42
8. Press the ENTER button.
4. Convenient Features
10.Press the SELECT  or  button to highlight the [OK] and press the ENTER button.
This completes the Cornerstone correction.
Selecting [Cancel] will return to the adjustment screen without saving changes (Step 3).
Selecting [Reset] will return to the factory default.
Selecting [Undo] will exit without saving changes.
NOTE: To reset the 3D Reform correction setting values, press and hold the 3D REFORM button for a minimum of 2 seconds.
NOTE: During 3D...

43
4. Convenient Features
*The following are conditions under which the maximum angle is achived:
•When the standard lens is used
•When the lens shift is set to the center
•When the lens shift is used and yet the image is not displayed in the center of the screen, the adjustable range will
be increased or decreased.
•Image is projected in Wide (Zoom lever)
•Resolution is XGA
Higher resolution than XGA narrows the adjustable range.
•Menu items should be set as follows:
Aspect Ratio ........... 4:3
Screen...

44
4. Convenient Features
 Making Freehand Drawings on a Projected Image
(ChalkBoard)
The ChalkBoard feature allows you to write and draw messages on a projected image.
NOTE: Selecting another source will quit the ChalkBoard function.
NOTE: The ChalkBoard feature is available only when a USB mouse is used.
To display the ChalkBoard tool bar, click the middle button on your mouse or select [ChalkBoard] from the menu.
The tool bar contains the following icons.

 Drag ................. Drags to move the...

45
4. Convenient Features
 Preventing Unauthorized Use of the Projector
Assigning a keyword prevents the projector from being used by unauthorized individuals.
Assigning a Keyword for the first time
1. Press the MENU button.
The menu will be displayed.
2. Press the SELECT  button to highlight the [Setup] submenu and press the ENTER button.
The page tab [Basic] will be highlighted.
3. Press the SELECT  button twice to highlight the page tab [Security]. 

46
4. Convenient Features
4. Press the SELECT  button four times to highlight [Security].
5. Press the ENTER button to display the Security screen.
6. Press the SELECT  button once to highlight the Keyword entry box and press the ENTER button.
The Software keyboard will be displayed. 

47
4. Convenient Features
7. Enter an alphanumeric keyword using the Software keyboard
For example, to enter “1234”, follow the steps 7-1 to 7-4 below.
NOTE:
• Please make a note of your keyword.
• Do not use spaces (SP) in your keyword.
7-1. Highlight the number “1” and press the ENTER button.
The asterisk “
” will be displayed in the Keyword entry box.
7-2. Press the SELECT 
 button once to highlight “2” and press the ENTER button.
The asterisk “
” will be displayed in the Keyword entry box.
7-3....

48
4. Convenient Features
Checking If Security is enabled
Turn off the projector and turn it back on to check if the Security function is enabled.
1. Press the POWER (ON/STANDBY) button.
The [Power Off / Are you sure?] message will appear.
Press the ENTER button or the POWER (ON/STANDBY) or the POWER OFF button again.
The lamp lights off and the POWER indicator flashes orange. Please wait until the POWER indicator changes from
flashing to steady light.
2. When the POWER indicator lights steady orange,...

49
Disabling the Security
1. Press the MENU button.
The menu will be displayed.
NOTE: Immediately after the projector has been turned on and the “Projector is locked! Enter your keyword.” message is
displayed at the bottom of the screen, pressing the MENU button will display the Keyword entry will be displayed. At this time,
pressing the MENU button will display the menu.
2. Press the SELECT 
 button to highlight [Setup] and press the ENTER button.
The page tab [Basic] will be highlighted.
3. Press the...

50
 Operation Using an HTTP Browser
Overview
The use of HTTP server functions will allow control of the projector from a web browser without the installation of
special software. Please be sure to use “Microsoft Internet Explorer 4.x” or a higher version for the web browser. (This
device uses “JavaScript” and “Cookies” and the browser should be set to accept these functions. The setting method
will vary depending on the version of browser. Please refer to the help files and the other information...