NEC Np1000 Lcd Projector Users Manual

							61
5. Using the Viewer
0000.jpg0001.jpg0002.jpg 3 Files
Slot 1
RECYCLED
PICTURE
1/3  0000.jpg 60KB 08/21/2005  06/29  263KBselect :  ENTER
?
Highlight .................................. Indicates the selected folder or drive.
List of folders .......................... Indicates folders contained on a PC card or USB memory.
Information .............................. Indicates information of the selected file or folder.
Folder: folder name, creation date (month/day/year), creation time (hour/minute).
File: slide number/number of displayable slides in a folder, file name, creation date (month/day/
year), creation time (hour/minute), file size.
Number of files ........................ Indicates number of displayable slides in the selected folder. The maximum number of images
recognized as slides within one directory is about 250.
Thumbnail/file name ................ Indicates thumbnails and names contained in a folder.
Cursor ..................................... Indicates the selected slide.
Scroll bar ................................. Used to view folders or files not visible in the window.
Viewer Window Elements
Highlight List of folders
InformationNumber of filesThumbnail/file name
Scroll bar
Cursor (orange) 
						

							62
5. Using the Viewer
Setting Option for Viewer
Play Mode:
Manual .................. Views a slide manually when the Viewer source is selected.
Auto ...................... Plays back slides automatically when the Viewer source is selected.
Interval:
Specifies interval time between 5 and 300 seconds.
Start:
Specifies start screen when the Viewer source is selected.
Show Thumbnails:
Selecting the Viewer source will display a list of thumbnails of graphic files stored in the PC card or USB memory
when [On] is selected.
0000.jpg0001.bmp0002.jpg 3 Files
Slot 1
RECYCLED
PICTURE
1/3  0000.jpg 60KBselect :  ENTERfolder :  EXIT
?
08/21/2005  06/29  263KB
0000.jpg0001.jpg0002.jpg 3 Files
Slot 1
RECYCLED
PICTURE
1/3  0000.jpg 60KBselect :  ENTER
?
folder :    
EXIT08/21/2005  06/29  263KB
[Off][On]
Sort:
Rearranges the slides or thumbnails by name, extension, date or size.
NOTE: This setting is not available for the following folders:
*Folders created with the Output Viewer feature of Ulead Photo Explorer 8.0 or with Viewer PPT Converter 3.0
OK/Cancel:
To close the Options menu with saving changes, select [OK] and press the ENTER button.
To close the Options menu without saving changes, select [Cancel] and press the ENTER button. 
						

							63
Exiting Viewer
To exit Viewer, switch to another input such as Computer 1, Computer 2, Computer 3, Component, Video, S-Video or
LAN.
*To switch to another input, there are two ways:
*Press the COMPUTER 1, COMPUTER 2, COMPUTER 3, COMPONENT, VIDEO, S-VIDEO or LAN button on
the remote control.
*Press the MENU button on the remote control to display the Viewer menu. Press the MENU button again to
display the main menu and select the input from the [Source] submenu.
With this function it is possible to switch directly to a slide when the picture of a VCR or computer is being projected.
Example: When conducting presentations using a combination of slides and moving pictures from a VCR, etc., it is
possible to switch from a Viewer slide to the video picture then back to the Viewer slide simply by using the Viewer
button.
NOTE: Even if you switch the current Viewer source to another source, the current slide is retained. When you return back to the
Viewer, you will get the slide that has been retained.
Viewing Digital Images
Digital images can be played with the Viewer if the following conditions are met:
•If the image can be stored on an MS-DOS format PC card.
•If the image can be stored in a format supported by the Viewer. With the Viewer, images on the card are searched
for in directories and images in JPEG, BMP, non-interlaced GIF or non-interlaced PNG format are recognized as
slides.
NOTE: The maximum number of images recognized as slides within one directory is about 250.
5. Using the Viewer 
						

							64
5. Using the Viewer
 Changing Background Logo
You can change the default background logo using the Viewer feature.
NOTE: File size must be 256KB or less. File formats other than JPEG, BMP, non-interlaced GIF or non-interlaced PNG are not
available.
Preparation: Store JPEG or BMP files (JPEG, BMP, non-interlaced GIF or non-interlaced PNG files) in a PC card or
USB memory inserted into your PC and insert the PC card into the projectors slot or USB memory into the projectors
USB port.
1. Press the VIEWER button on the remote control to display an image.
2. Press the MENU button to display the Viewer menu.
0000.jpg0001.jpg0002.jpg 3 Files
Slot 1
RECYCLED
PICTURE
1/3  0000.jpg 60KBselect :  ENTER
?
folder :    
EXIT08/21/2005  06/29  263KB
3. Use the  button to select [Thumbnails] and then press the ENTER button.
The Thumbnail screen will be displayed.
NOTE: To change highlight from the Thumbnails screen (right window) to a directory tree (left window) , press the EXIT button. To
return highlight to the Thumbnails screen, press the ENTER button.
4. Use 

 button to select a file (slide) for your background logo.
5. Press the MENU button to display the Viewer menu.
6. Use the 
 button to select [Logo] and then press the ENTER button.
A confirmation dialog box will be displayed.
7. Use the 
 button to select [Yes] and press the ENTER button. This completes changing a logo for the
background.
*Once you have changed the background from the NEC logo to another, you cannot return the logo to background
even by using [Reset]. To put the NEC logo back in the background logo, repeat the above steps. The NEC logo file
is included on the supplied User Supportware 3 CD-ROM (/Logo/NEC_BB_X.JPG). 
						

							65

 Using the Menus
1. Press the MENU button on the remote control or the projector cabinet to display the menu.
NOTE: The commands such as , ENTER, EXIT in the gray bar show available buttons for your operation.
2. Press the SELECT 
 buttons on the remote control or the projector cabinet to display the submenu.
3. Press the ENTER button on the remote control or the projector cabinet to highlight the top item or the first
tab.
4. Use the SELECT 

 buttons on the remote control or the projector cabinet to select the item you want to
adjust or set.
You can use the SELECT 
 buttons on the remote control or the projector cabinet to select the tab you
want.
NOTE: You can select a tab only when the tab color is orange.
5. Press the ENTER button on the remote control or the projector cabinet to display the submenu window.
6. Adjust the level or turn the selected item on or off by using the SELECT 

 buttons on the remote
control or the projector cabinet.
Changes are stored until you adjust it again.
7.Repeat steps 2 -6 to adjust an additional item, or press the EXIT button on the remote control or the
projector cabinet to quit the menu display.
NOTE: When a menu or message is displayed, several lines of information may be lost, depending on the signal or settings.
Main menu
Submenu window
Currently available
buttons
Submenu
6. Using On-Screen Menu 
						

							66
 Menu tree
Menu Item
Source Computer 1, Computer 2, Computer 3, Component, Video, S-Video, Viewer, LAN, Entry List
Adjust Picture Mode Standard, Professional
Preset 1 to 6
Detail Settings GeneralReference High-Bright, Presentation, Video,
Movie, Graphic, sRGB
Gamma CorrectionDynamic, Natural, Black Detail
Color Temperature5000, 6500, 7800, 8500, 9300, 10500
White BalanceBrightness RGB, Contrast RGB
Color CorrectionRed, Green, Blue,Yellow, Magenta,
Cyan
Brightness
Contrast Manual, Auto
Sharpness
Color
Hue
Reset
Image Options Clock
Phase
Horizontal Position
Vertical Position
Blanking Top, Bottom, Left, Right
Overscan 0%, 5%, 10%
Aspect Ratio 4:3 4:3, Letterbox, Wide Screen, Crop
16:9 4:3 Window, Letterbox, Wide Screen, 4:3 Fill
Video 3D Y/C Separation Off, On: Still, Normal, Movie
Vertical Enhancer Off, 1, 2, 3
Deinterlace Off, On: Still, Normal, Movie
Telecine Off, On: 2-2/2-3 Auto, 2-2 On, 2-3 On
Contrast Enhancement Off, On, Split, Adjust
Sound Volume, Bass, Treble, Balance, 3D Surround (Off, On)
Setup Basic Keystone Horizontal, Vertical
Cornerstone
Wall Color Off, Blackboard, Blackboard (Gray), Light yellow, Light green, Light blue,
Sky blue, Light rose, Pink
Lamp mode Normal, Eco
Menu Mode Basic Menu, Advanced Menu
Language English, Deutsch, Français, Italiano, Español, Svenska, Suomi, Norsk,
Nederlands, Türkçe, Polski, 
, , Magyar, Português,
Cestina, , Dansk, , , 
Menu Color Select Color1 to 5, Monochrome
Display Select Source: On, Off / Message: On, Off / Time: On, Off
Display Time Manual, Auto 5 sec, Auto 15 sec, Auto 45 sec
Background Blue, Black, Logo
Security Control Panel Lock Off, On
Menu Lock Off, On
Logo Lock Off, On
Security Off, On, Keyword, Use Protect Key, Drive, Read, Register, Delete
PJLink Off,On
Password
6. Using On-Screen Menu
Basic menu items are indicated by
shaded area.
Factory default settings are indicated
by the gray shaded area. 
						

							67
6. Using On-Screen Menu
Menu Item
Setup Installation Orientation Desktop Front, Ceiling Rear, Desktop Rear, Ceiling Front
Screen Screen Type: 4:3, 16:9 / Position
LAN Mode Built-in Profiles: Profile 1, Profile 2
DHCP: On, Off
IP Address
Subnet Mask
Gateway
DNS Configuration
Reconnect
PC Card Profiles: Easy Connection, Profile 1, Profile 2
DHCP: On, Off
IP Address
Subnet Mask
Gateway
DNS Configuration
Advanced:
Network Type: Site Survey, SSID, Mode, Channel
WEP: WEP, Key Select, Key 1-4
Reconnect
Domain Host Name
Domain Name
Mail Alert Mail: On, Off
Senders Address
SMTP Server Name
Recipients Address 1-3
Test Mail
Projector Name
Communication Speed 4800bps, 9600bps, 19200bps, 38400bps
Date, Time Preset Date: Month / Day / Year, Time: (H / M)
Remote Sensor Front / Back, Front, Back
Options Auto Adjust Off, Normal, Fine
Auto Start Off, On
Power Management Off, 0:05, 0:10, 0:20, 0:30
Fan Mode Auto, High
Default Source Select Last, Auto, Select (Computer1, Computer2, Computer3,
Component, Video, S-Video, Viewer, LAN)
Signal Select Computer1 RGB/Component, RGB, Componet, Scart
Computer2 RGB/Component, RGB, Componet
Component Component, Video
Color System Component (Video), Video, S-Video
S-Video Mode Select Off, S2
OUT Terminal Last, Computer1, Computer2, Component
Tools ChalkBoard
Off Timer Off, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00
Program Timer
Mouse Mouse Pointer: Pointer 1 to Pointer 9 / Button: Right Hand, Left Hand
Sensitivity: Fast, Medium, Slow
Information Usage Time Lamp Life Remaining, Lamp Hours Used, Filter Hours Used, Projector Hours Used
Source Page1 Input Terminal, Signal Type, Video Type, Source Name, Entry No.
Source Page2 Horizontal Frequency, Vertical Frequency, Sync Type, Sync Polarity, Scan Type
LAN Built-in IP Address, Subnet Mask, Gateway, MAC Address
LAN PC Card IP Address, Subnet Mask, Gateway, MAC Address
LAN Wireless SSID, Mode, WEP, Channel, Signal Level
Version Model, Serial Number, Firmware, Data
Reset Current Signal, All Data, All Data (Including Entry List), Clear Lamp Hours, Clear Filter Hours 
						

							68
 Menu Elements
Slide bar
Solid triangle
Highlight
Ta b
Radio button
Check box
Cancel button
OK button
Menu windows or dialog boxes typically have the following elements:
Highlight ................ Indicates the selected menu or item.
Solid triangle ......... Indicates further choices are available. A highlighted triangle indicates the item is active.
Tab........................ Indicates a group of features in a dialog box. Selecting on any tab brings its page to the front.
Radio button ......... Use this round button to select an option in a dialog box.
Check box ............. Place a checkmark in the square box to turn the option On.
Slide bar ................ Indicates settings or the direction of adjustment.
OK button .............. Press to confirm your setting. You will return to the previous menu.
Cancel button ........ Press to cancel your setting. You will return to the previous menu.
Close button .......... Click to close the window and saving changes. (USB mouse only)
Help button ........... Indicates that help about that feature is available (USB mouse only). Press the HELP button on the remote
control to display help.
Help buttonClose button
6. Using On-Screen Menu 
						

							69
6. Using On-Screen Menu
 Menu Descriptions & Functions [Source]
Computer 1 and 2
Selects the computer connected to your COMPUTER 1 or COMPUTER 2 input connector signal.
NOTE: An optional component cable (Component V or ADP-CV1 cable) is needed for a component signal.
Computer 3 (RGB Digital)
Selects the computer connected to your COMPUTER 3 (DVI-D) connector.
Component
Selects what is connected to your COMPONENT IN (Y, Cb/Pb, Cr/Pr).
Video
Selects what is connected to your VIDEO input-VCR, laser disc player, DVD player or document camera.
S-Video
Selects what is connected to your S-VIDEO input-VCR, DVD player, or laser disc player.
NOTE: A frame may freeze for a brief period of time when a video is played back in fast-forward or fast-rewind with a Video or S-
Video source.
Viewer
This feature enables you to make presentations using a PC card that contains captured images and slides created
with the exclusive Ulead Photo Explorer 8.0 for NEC contained on the CD-ROM. See the supplied NEC Wired and
Wireless Network Setup Guide for installing the Ulead Photo Explorer 8.0 for NEC.
See page 60 for viewing slides.
LAN
Selects a signal from the LAN port (RJ-45) or the NEC optional wireless LAN card plugged into the projectors card
slot. 
						

							70
6. Using On-Screen Menu
[Entry List]
Use the SELECT 
 buttons on your remote control or the projector cabinet to select the signal and press the
ENTER button on the remote control or the projector cabinet to display the [Entry Edit Command] screen.
Entering the Currently Projected Signal into the Entry List
1. Display the Entry List.
2. Use the SELECT 

 or  button on your remote control or the projector cabinet to select any number and
press the ENTER button on the remote control or the projector cabinet to display the [Entry Edit Com-
mand] screen.
3. Use the SELECT 
 or  button to select [Store] and press the ENTER button.
Using the [Entry List]
Making any adjustments to the current picture will automatically register its adjustments to the [Entry List]. The regis-
tered signal can be loaded any time from the [Entry List].
NOTE: Up to 100 presets can be registered except settings on the Picture.