NEC NP01UCM Projector Specifications
Have a look at the manual NEC NP01UCM Projector Specifications online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
ISSUED: 04-11-06 SHEET #: 055-9458-6 09-25-09 Visit the Peerless Web Site at www.peerlessmounts.com 1 of 9 For customer care call 1-800-729-0307 or 708-865-8870. Read instruction sheet before you start installation and assembly.Maximum Load Capacity: 50 lb (22.7 kg) IMPORTANT! Be sure not to touch the projector while tightening the set screw on the ball and socket mount. This may cause the image to be unaligned when you let go. IMPORTANT! Turn to the appropriate page for your ceiling installation. • Make sure that the supporting surface will safely support the combined load of the equipment and all attached hardware and components. WARNING Model: NP01UCMInstallation and Assembly - Universal Ceiling Mount Table of Contents Parts List.............................................................................................................................................................................. 2 To Wood Joist Finished Ceilings, Exposed Wood Joists or Wood Beam Ceilings................................................................ 4 To Concrete Ceilings ............................................................................................................................................................. 5 Flush Mount.......................................................................................................................................................................... 6 Extension Column................................................................................................................................................................ 7 Attaching Universal Adapter Plate to Projector..................................................................................................................... 8
ISSUED: 04-11-06 SHEET #: 055-9458-6 09-25-09 Visit the Peerless Web Site at www.peerlessmounts.com 2 of 9 For customer care call 1-800-729-0307 or 708-865-8870. Parts List Before you start check the parts list to insure all of the parts shown are included. Description Qty.Part Number Aball and socket mount 1055-0016 B4 mm security allen wrench 1560-9646 CM5 x .8 x 10 mm socket pin type F screw 1520-2031 D#10-32 x 3/8 spade thumb screw 1560-2107 E#10-32 x 3/8 serrated washer head socket pin screw 1520-2151 F#14 x 2.5 phillips hex head wood screw 25S1-015-C04 Gceiling plate 1580-4042 H.25 ID x .56 OD x .26 spacer 2590-2071 Iextension column connector with cord management 1580-4025 J#10-32 x 3/8 socket pin screw 2520-2084 K#10-32 x 3/16 slotted set screw 3520-2187 Ladapter plate 1055-4867 MM3 x 8 mm serrated washer head socket pin screw (not shown) 4510-2004 NM4 x 10 mm serrated washer head socket pin screw (not shown) 4 510-2060 OM5 x 10 mm serrated washer head socket pin screw (not shown) 4 510-2063 PM6 x 10 mm serrated washer head socket pin screw (not shown) 4 510-2066 Q2 mm security allen wrench 1560-1097 Rwasher 4540-2025 B C E D F H J Fasteners K Note: Actual parts may appear slightly different than illustrated. AIG R Q L
ISSUED: 04-11-06 SHEET #: 055-9458-6 09-25-09 Visit the Peerless Web Site at www.peerlessmounts.com 3 of 9 For customer care call 1-800-729-0307 or 708-865-8870. Manufacturer Model NECLT280 NECLT380 NECNP110 NECNP215 NECNP300 NECNP310 NECNP400 NECNP410 NECNP410W NECNP500 NECNP500W NECNP500WS NECNP510 NECNP510W NECNP510WS NECNP600 NECNP600S NECNP610 NECNP610S NECNP901W NECNP905 NECNP1000 NECNP1200 NECNP1150 NECNP1250 NECNP2000 NECNP2150 NECNP2200 NECNP2250 NECNP3150 NECNP3250 NECNP3151W NECNP3150W NECVT49 NECVT490 NECVT491 NECVT595 NECVT695 NECVT700 NECVT800 Compatability Chart for NEC Projectors
ISSUED: 04-11-06 SHEET #: 055-9458-6 09-25-09 Visit the Peerless Web Site at www.peerlessmounts.com 4 of 9 For customer care call 1-800-729-0307 or 708-865-8870. F F G WOOD JOIST CEILING Drill two 5/32 (4 mm) dia. holes to a minimum depth of 2.5 (64 mm). Attach ceiling plate (G) with two #14 x 2.5 (6 mm x 65 mm) wood screws (F) as shown using 3/8 (10 mm) socket wrench. Skip to step 2. IMPORTANT: Be sure to drill holes into the joist CENTER! For optional Cord Management, install two spacers (H) between ceiling plate (G) and ceiling. Installation To Wood Joist Finished Ceilings, Exposed Wood Joists, or Wood Beam Ceilings WOOD JOIST CEILING F FG H H Tighten wood screws (F) so that ceiling plate (G) is firmly attached, but do not overtighten. Overtightening can damage the screws, greatly reducing their holding power. Make sure that mounting screws are anchored into the center of the studs. The use of an edge to edge stud finder is highly recommended. WARNING It is the responsibility of the installer to verify that the supporting surface will safely support the combined load of all attached hardware and components. WARNING 1
ISSUED: 04-11-06 SHEET #: 055-9458-6 09-25-09 Visit the Peerless Web Site at www.peerlessmounts.com 5 of 9 For customer care call 1-800-729-0307 or 708-865-8870. Drill two 1/4 (6 mm) dia. holes to a minimum depth of 2.5 (64 mm). Attach ceiling plate (G) using two concrete anchors and #14 x 2.5 wood screws (F) as shown in Illustration A and 1, 2, and 3 (below). Tighten all fasteners. IMPORTANT: It is the responsibility of the installer to verify that the ceiling will safely support the combined load of all attached hardware and components. 1 3 CUTAWAY VIEW INCORRECT concretemetal bracket plaster/ dry wall CORRECT concretemetal bracket plaster/ dry wall concrete ceiling concrete anchor concrete anchor concrete anchor F F Illustration A ACC 203 (Alligator® concrete anchors) are recommended. 2G FOR DIRECT ATTACHMENT TO LOAD BEARING CONCRETE ONLY! Concrete expansion anchors are not intended for attachment to concrete ceilings covered with a layer of plaster, drywall, or other finishing material. If mounting to concrete ceiling covered with plaster / drywall is unavoidable, plaster / drywall must be counterbored as shown below. WARNING F G CONCRETE CEILING concrete anchor Drill hole and insert anchor Place ceiling plate over anchor and secure with screw After repeating step one tighten all fasteners Tighten wood screws so that ceiling is firmly attached, but do not overtighten. Overtightening can damage the screws, greatly reducing their holding power. Make sure that mounting screws are anchored into the center of the studs. The use of an edge to edge stud finder is highly recommended. WARNING When installing ceiling mounts on concrete, verify that you have a minimum of 1 5/8 of actual concrete surface in the 1/4 diameter hole to be used for the concrete anchors. Do not drill into mortar joints! Concrete must meet ASTM C-90 specifications. Concrete must be 2000 psi density minimum. Lighter density concrete may not hold concrete anchor. Make sure that the supporting surface will safely support the combined load of the equipment and all attached hard- ware and components. Never exceed the Maximum Load Capacity of 50 lb (22.7 kg). WARNING 1 Installation to Concrete Ceilings
ISSUED: 04-11-06 SHEET #: 055-9458-6 09-25-09 Visit the Peerless Web Site at www.peerlessmounts.com 6 of 9 For customer care call 1-800-729-0307 or 708-865-8870. Screw ball and socket mount (A) into ceiling plate (G). Align the notch with one of the four holes of the ceiling plate (G) and secure ball and socket mount (A) with a M5 x 10 mm socket pin screw (C) using security allen wrench (B) as shown in detail 1. NOTE: Slotted set screw (K) is used to jam against the threads of the ball and socket mount to prevent any excess movement of the ball and socket mount (A). Do not overtighten screw; overtightening screw will damage threads making it difficult to separate the products. Skip to step 3. Flush Mount Application DETAIL 1 A GA C WOOD CEILING NOTCH G K 1
ISSUED: 04-11-06 SHEET #: 055-9458-6 09-25-09 Visit the Peerless Web Site at www.peerlessmounts.com 7 of 9 For customer care call 1-800-729-0307 or 708-865-8870. Screw extension column to ceiling plate (G). Align the notch with one of the four holes in the ceiling plate (G) and secure extension column with a M5 x 10 mm socket pin screw (C) using security allen wrench (B). See detail 4. Screw extension column connector (I) to extension column. Align slot in extension column with one of the top holes in extension column connector (I). Insert and tighten one #10-32 x 3/8 socket pin screw (J) through extension column connector (I) into slot on extension column using security allen wrench (B). See detail 5. Screw ball and socket mount (A) to extension column connector (I). Align slot in ball and socket mount (A) to one of the bottom holes in extension column connector (I). Insert and tighten one #10-32 x 3/8 socket pin screw (J) through extension column connector into slot in ball and socket mount (A) using security allen wrench (B). See detail 6. NOTE: Slotted set screws (K) are used to jam against the threads of each connecting joint to prevent any excess movement. Do not overtighten screws; overtightening screws will damage threads making it difficult to separate the products. DETAIL 6 SLOT SLOT G I DETAIL 5 DETAIL 4 EXTENSION COLUMN C G Installation to Extension Column A K A EXTENSION COLUMN SLOT I J EXTENSION COLUMN SLOT I J K K EXTENSION COLUMN (UL Listed EXT or ADJ Series) Sold Separately 2
ISSUED: 04-11-06 SHEET #: 055-9458-6 09-25-09 Visit the Peerless Web Site at www.peerlessmounts.com 8 of 9 For customer care call 1-800-729-0307 or 708-865-8870. Generic Screw L Mounting hole * Generic Projector Place projector upside down. Locate adapter plate (L) with notch facing forward as close to projector center of gravity as possible without covering any mounting holes. Loosen channels, and if there are only three mounting holes remove fourth channel. Using one channel for each mounting hole, position feet of channels over mounting holes as shown below. Important: If projector does not have at least three mounting holes, do not use this adapter plate. NOTE: Some projectors have feet which can be removed and the corresponding threaded insert can be used for a mounting hole. NOTE: Once channels are in position retighten fasteners. *Notch indicates front of projector.NOTE: The projector you are installing may differ in appearance from the sample illustrated below. Attach adapter plate (L) to projector using one screw (M, N, O, or P) for each channel as shown below. Tighten all screws, while keeping the center of gravity. Be sure that adapter plate (L) is straight. Adjust the feet of the channels to keep the adapter plate level. Tighten all screws with 4 mm security allen wrench (B) or wrench provided with projector mount, while keeping the center of gravity. If M3 screws are used, tighten using 2 mm security allen wrench (Q). NOTE: Projectors will require different size screws for mounting. Use a combination of screws (M, N, O, or P) and foot adjustment that will result in channels of adapter plate (L) fitting tightly against projector. Important: In order to properly engage the threads in the mounting holes, the screw must be turned at least 3 full turns. NOTE: If using screw (M), place washer (R) between screw (M) and foot of channel. Foot of Channel L It is the responsibility of the installer to ensure that the projector is properly ventilated. Feet of channels are used to raise the mount off the projector surface. CAUTION Attaching Universal Adapter Plate to Projector 3 4
ISSUED: 04-11-06 SHEET #: 055-9458-6 09-25-09 Visit the Peerless Web Site at www.peerlessmounts.com 9 of 9 For customer care call 1-800-729-0307 or 708-865-8870. To adjust roll, pitch, and yaw loosen the set screw (shown below) using security allen wrench (B) or standard 4 mm allen wrench. You should be able to just slightly loosen the screw so that your adjust- ments can be set without having to hold the projector. Move projector to desired position and slowly tighten set screw. NOTE: Be sure not to touch the projector while tightening the set screw. This may cause the image to be unaligned when you let go. IMPORTANT: Allen wrench is your key for projector removal. Store it in a safe place. NOTE: The projector adapter plate and projector you are installing may differ in appearance from the sample illustrated below. Attach projector, with adapter plate already on it, to the ball and socket mount (A) by inserting the ball and socket mount (A) into the adapter plate connection and twisting until the adapter plate will no longer turn (about 75°). The spring loaded captive screw should line up with a corresponding hole on the adapter plate (this should line up automatically when the two are connected). Push down and tighten the spring loaded captive screw to secure the adapter plate to the mount. If not using the optional security feature, fasten thumb screw (D) in the hole opposite the spring loaded captive screw. OPTIONAL: For security, insert serrated washer head socket pin security screw (E) in the hole opposite the spring loaded captive screw. Tighten with security allen wrench (B). This will prevent the projector from being removed. NOTE: Be sure to only use the #10-32 x 3/8 screw (E) (or the thumb screw (D)) opposite the spring loaded captive screw. 56 WOOD JOIST E D 2 1 A CAPTIVE SCREW PROJECTOR ADAPTER PLATEPROJECTOR CUTAWAY VIEW OF CEILING PLATE (G) CEILINGWOOD JOIST CEILING SET SCREW PROJECTOR Do not lift more weight than you can handle! Use additional man power or mechanical lifting equipment to safely handle placement of the projector! WARNING