NEC NP01UCM Projector Specifications
Here you can view all the pages of manual NEC NP01UCM Projector Specifications. The NEC manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 1
ISSUED: 04-11-06 SHEET #: 055-9458-6 09-25-09 Visit the Peerless Web Site at www.peerlessmounts.com 1 of 9 For customer care call 1-800-729-0307 or 708-865-8870. Read instruction sheet before you start installation and assembly.Maximum Load Capacity: 50 lb (22.7 kg) IMPORTANT! Be sure not to touch the projector while tightening the set screw on the ball and socket mount. This may cause the image to be unaligned when you let go. IMPORTANT! Turn to the...
Page 2
ISSUED: 04-11-06 SHEET #: 055-9458-6 09-25-09 Visit the Peerless Web Site at www.peerlessmounts.com 2 of 9 For customer care call 1-800-729-0307 or 708-865-8870. Parts List Before you start check the parts list to insure all of the parts shown are included. Description Qty.Part Number Aball and socket mount 1055-0016 B4 mm security allen wrench 1560-9646 CM5 x .8 x 10 mm socket pin type F screw 1520-2031 D#10-32 x 3/8 spade thumb screw 1560-2107 E#10-32 x 3/8 serrated washer head socket pin screw...
Page 3
ISSUED: 04-11-06 SHEET #: 055-9458-6 09-25-09 Visit the Peerless Web Site at www.peerlessmounts.com 3 of 9 For customer care call 1-800-729-0307 or 708-865-8870. Manufacturer Model NECLT280 NECLT380 NECNP110 NECNP215 NECNP300 NECNP310 NECNP400 NECNP410 NECNP410W NECNP500 NECNP500W NECNP500WS NECNP510 NECNP510W NECNP510WS NECNP600 NECNP600S NECNP610 NECNP610S NECNP901W NECNP905 NECNP1000 NECNP1200 NECNP1150 NECNP1250 NECNP2000 NECNP2150 NECNP2200 NECNP2250 NECNP3150 NECNP3250 NECNP3151W NECNP3150W...
Page 4
ISSUED: 04-11-06 SHEET #: 055-9458-6 09-25-09 Visit the Peerless Web Site at www.peerlessmounts.com 4 of 9 For customer care call 1-800-729-0307 or 708-865-8870. F F G WOOD JOIST CEILING Drill two 5/32 (4 mm) dia. holes to a minimum depth of 2.5 (64 mm). Attach ceiling plate (G) with two #14 x 2.5 (6 mm x 65 mm) wood screws (F) as shown using 3/8 (10 mm) socket wrench. Skip to step 2. IMPORTANT: Be sure to drill holes into the joist CENTER! For optional Cord Management, install two spacers (H) between...
Page 5
ISSUED: 04-11-06 SHEET #: 055-9458-6 09-25-09 Visit the Peerless Web Site at www.peerlessmounts.com 5 of 9 For customer care call 1-800-729-0307 or 708-865-8870. Drill two 1/4 (6 mm) dia. holes to a minimum depth of 2.5 (64 mm). Attach ceiling plate (G) using two concrete anchors and #14 x 2.5 wood screws (F) as shown in Illustration A and 1, 2, and 3 (below). Tighten all fasteners. IMPORTANT: It is the responsibility of the installer to verify that the ceiling will safely support the combined load of...
Page 6
ISSUED: 04-11-06 SHEET #: 055-9458-6 09-25-09 Visit the Peerless Web Site at www.peerlessmounts.com 6 of 9 For customer care call 1-800-729-0307 or 708-865-8870. Screw ball and socket mount (A) into ceiling plate (G). Align the notch with one of the four holes of the ceiling plate (G) and secure ball and socket mount (A) with a M5 x 10 mm socket pin screw (C) using security allen wrench (B) as shown in detail 1. NOTE: Slotted set screw (K) is used to jam against the threads of the ball and socket mount...
Page 7
ISSUED: 04-11-06 SHEET #: 055-9458-6 09-25-09 Visit the Peerless Web Site at www.peerlessmounts.com 7 of 9 For customer care call 1-800-729-0307 or 708-865-8870. Screw extension column to ceiling plate (G). Align the notch with one of the four holes in the ceiling plate (G) and secure extension column with a M5 x 10 mm socket pin screw (C) using security allen wrench (B). See detail 4. Screw extension column connector (I) to extension column. Align slot in extension column with one of the top holes in...
Page 8
ISSUED: 04-11-06 SHEET #: 055-9458-6 09-25-09 Visit the Peerless Web Site at www.peerlessmounts.com 8 of 9 For customer care call 1-800-729-0307 or 708-865-8870. Generic Screw L Mounting hole * Generic Projector Place projector upside down. Locate adapter plate (L) with notch facing forward as close to projector center of gravity as possible without covering any mounting holes. Loosen channels, and if there are only three mounting holes remove fourth channel. Using one channel for each mounting hole,...
Page 9
ISSUED: 04-11-06 SHEET #: 055-9458-6 09-25-09 Visit the Peerless Web Site at www.peerlessmounts.com 9 of 9 For customer care call 1-800-729-0307 or 708-865-8870. To adjust roll, pitch, and yaw loosen the set screw (shown below) using security allen wrench (B) or standard 4 mm allen wrench. You should be able to just slightly loosen the screw so that your adjust- ments can be set without having to hold the projector. Move projector to desired position and slowly tighten set screw. NOTE: Be sure not to...