NEC Neax 2400 Ipx Isdn Features And Specifications

NEAX2400 IPX ISDN Features and Specifications
Page 26NDA-24311, Issue 1
C-99 Call Transfer - All Calls - PRI
C-99  Call Transfer - All Calls - PRI
General Description
This feature permits a user to transfer incoming or outgoing ISDN calls to another station without Attendant
assistance.
Operating Procedure
To transfer a call in progress
1. While connected with the first party, press the switchhook; receive special dial tone.
2. Dial the third party; receive ringback tone.
3. The user can then either:
a.)...

NEAX2400 IPX ISDN Features and Specifications
NDA-24311, Issue 1
Page 27
Call Transfer - All Calls - PRI C-99
Service Conditions (cont’d)
8. Reorder tone is returned to the user when the following actions occur:
a.) The user’s line is restricted by outward or miscellaneous trunk restrictions by the line class of
service (COS).
b.) The user dials the number of an unequipped line, or termination is restricted (route restrictions)
by the line COS.
c.) The first digit dialed by the user is invalid....

NEAX2400 IPX ISDN Features and Specifications
Page 28NDA-24311, Issue 1
C-99D Call Transfer - All Calls - Dterm - PRI
C-99D  Call Transfer - All Calls - Dterm - PRI
General Description
This feature permits a user to transfer incoming or outgoing ISDN calls without Attendant assistance.
Operating Procedure
To transfer a call in progress
1. While connected with the first party, press the TRANSFER key; receive special dial tone.
2. Dial the third party; receive ringback tone.
3. At this point, the user can...

NEAX2400 IPX ISDN Features and Specifications
NDA-24311, Issue 1
Page 29
Call Transfer - All Calls - Dterm - PRI C-99D
Service Conditions (cont’d)
6. When transferring a call from a station (second party) to another station or trunk (third party), the control
station can transfer the call during ringing. When the control station goes on-hook, the station on hold is
connected to the third party’s connection and hears ringback tone. A variable timer is set when the
controlling station goes on-hook. If the...

NEAX2400 IPX ISDN Features and Specifications
Page 30NDA-24311, Issue 1
C-100 Consultation Hold - All Calls - PRI
C-100  Consultation Hold - All Calls - PRI
General Description
This feature permits a user to hold any incoming or outgoing ISDN network call, or any intra-office call, while
originating a call to another station within the system.
Operating Procedure
To hold the original call and place a second call
1. Press the switchhook; receive special dial tone. The original call is held.
2. Dial the...

NEAX2400 IPX ISDN Features and Specifications
NDA-24311, Issue 1
Page 31
Consultation Hold - All Calls - Dterm - PRI C-100D
C-100D  Consultation Hold - All Calls - Dterm - PRI
General Description
This feature permits a Dterm user to hold any incoming or outgoing ISDN network calls, while originating a call to
another NEAX2400 IPX station within the system.
Operating Procedure
To hold the original call and place second call from a Dterm
1. Press the TRANSFER key; receive special dial tone. The original...

NEAX2400 IPX ISDN Features and Specifications
Page 32NDA-24311, Issue 1
C-101 Call Forwarding - Intercept Announcement - PRI
C-101 Call Forwarding - Intercept Announcement - 
PRI
General Description
This feature provides for interception of a called party number received via ISDN by DIRECT INWARD DIALING
[D-8] calls that cannot be completed (unassigned station, level, etc.). These calls are automatically routed to a
recorded announcement, informing the caller that an inoperative number was reached and...

NEAX2400 IPX ISDN Features and Specifications
NDA-24311, Issue 1
Page 33
Call Forwarding - Intercept Announcement - PRI C-101
Service Conditions (cont’d)
15. This service is not valid for TRUNK-TO-TRUNK CONNECTION [T-10] when the called station has set
CALL FORWARDING - ALL CALLS - OUTSIDE [C-28] via DID or Tie trunk.
16. This service is not valid for outgoing calls that do not go out when all trunks or senders are busy.
When encountering all trunks busy
17. This service feature is valid for outgoing...

NEAX2400 IPX ISDN Features and Specifications
Page 34NDA-24311, Issue 1
C-102 Call Pickup - Direct - PRI
C-102 Call Pickup - Direct - PRI
General Description
This feature allows a user to pick up an ISDN call to another station in the system by dialing a specific call pickup
code.
Operating Procedure
To pickup an incoming call
1. Lift the handset; receive dial tone.
2. Dial the CALL PICKUP - DIRECT code; receive second dial tone.
3. Dial the specific telephone number to be picked up. The incoming call is...

NEAX2400 IPX ISDN Features and Specifications
NDA-24311, Issue 1
Page 35
Call Waiting - Terminating - PRI C-114
C-114 Call Waiting - Terminating - PRI
General Description
This feature enables a busy station to receive a second incoming call from DID trunk of ISDN network. A call
waiting tone is sent to the busy station; the user can use CALL HOLD [C-6] to answer the second call. CALL HOLD
[C-6] can be used to alternate between the two calls.
Operating Procedure
To activate CALL WAITING - TERMINATING on...