Home > NEC > Communications System > NEC Neax 2400 Ipx Hotel Office Data Specification

NEC Neax 2400 Ipx Hotel Office Data Specification

Here you can view all the pages of manual NEC Neax 2400 Ipx Hotel Office Data Specification. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 171

NDA-24315 CHAPTER 4
Page 159
Issue 1
AGSPL: Assignment of Guest Special Access Code for LDM
SERVICE INDEX A (SIDA) 1-255PNO 1-15A/G
56
PNO
This parameter specifies the Admin./Guest
Numbering Parameter Classification.
After assigning the PNO, go to the AOSP
command to skip this ACC.
After skipping the access code, the system
refers to the numbering data designated in
the next parameter A/G.A/G
Numbering table designation for redevelopment
A: Admin.
G: Guest
When SRV=SSCA (Service code appendix), SIDA56...

Page 172

CHAPTER 4 NDA-24315
Page 160
Issue 1
AGSPL: Assignment of Guest Special Access Code for LDM
Assign the number of advanced trunk routes.LOGICAL ROUTE NUMBER
(LGRT)
Count
Assign a dummy route number.LGRT
Second dial tone sending (which is sent when a station has
dialed the digits specified in NND of the AGNPL command)
0=Second DT is not sent
1=Second DT is sent2nd DTAuthorization code after dialing
ACC (LCR)+Destination number
0=Out of Service
1=In ServiceAH
ISDN-Sub Address Dialing
0=Out of Service
1=In...

Page 173

NDA-24315 CHAPTER 4
Page 161
Issue 1
AGSPL: Assignment of Guest Special Access Code for LDM
Note:This Telephone Number is available to make a call and receive a call within the self node only.
If the Telephone Number is to be used within the Fusion Network, assign it at Network Control Node (NCN)
using the ASPAN command.
Assign the skip digits to terminate the call.
Assign the announce equipment number.
EQP3 and 5-14 can be used for SRV=ANNC (Single announcement).SKIP DIGITS
(SKIP) 0-5 When SRV=UNIF...

Page 174

CHAPTER 4 NDA-24315
Page 162
Issue 1
AGSPL: Assignment of Guest Special Access Code for LDM
4. Data Sheet
(a) Service Code (SRV = SSC)
TENANT 
NUMBER
 (TN)
ACCESS 
CODE
(ACC)MAXIMUM
6 DIGITS
CONNECTION STATUS 
INDEX
(CI) N/H/B
KIND OFSERVICE (SRV)
SERVICEINDEX
(SID)1 – 63
NUMBER OF 
NECESSARY
DIGITS 
(NND)
NUMBER OF 
NECESSARY
DIGIT FOR 
SPEED 
CALLING
(NND1)
1 – 24
FUSION 
POINT
CODE 
(FPC)
1-253
SERVICE CONTENTS
HHookingSSC1Not used
NNormalSSC2Dial Access to Attendant
(Operator Call)HHooking
3Not...

Page 175

NDA-24315 CHAPTER 4
Page 163
Issue 1
AGSPL: Assignment of Guest Special Access Code for LDM
(a) Service Code (SRV = SSC) (Continued)
SID = 36 (Hotel Service)
TENANT 
NUMBER 
(TN)ACCESS CODE(ACC)MAXIMUM
6 DIGITS
CONNECTION 
STATUS INDEX 
(CI) 
N/H/B
KIND OF 
SERVICE 
(SRV)SERVICE 
INDEX
(SID)
MAIDSTATUS 
(STATE)
1 – 63
SERVICE CONTENTS
NNormalSSC36
1To be cleaned without ID Code
2Cleaned without ID Code
3Ready for Occupancy without ID 
Code
4Use Not Allowed without ID Code
5
8
Not used
9Maid Dial Answer...

Page 176

CHAPTER 4 NDA-24315
Page 164
Issue 1
AGSPL: Assignment of Guest Special Access Code for LDM
(a) Service Code (SRV = SSC) (Continued)
SID = 36 (Hotel Service)
TENANT 
NUMBER 
(TN)ACCESS CODE(ACC)
MAXIMUM6 DIGITS
CONNECTION 
STATUS INDEX
(CI) N/H/B
KIND OF 
SERVICE
(SRV)
SERVICE 
INDEX
(SID)
MAIDSTATUS 
(STATE)
1 – 63
SERVICE CONTENTS
NNormalSSC36
21
24
Not used
25Maid Dial Answer Back with ID 
Code 1
26Maid Dial Answer Back with ID 
Code 2
27Maid Dial Answer Back with ID 
Code 3
28Maid Dial Answer Back...

Page 177

NDA-24315 CHAPTER 4
Page 165
Issue 1
AGSPL: Assignment of Guest Special Access Code for LDM
(a) Service Code (SRV = SSC) (Continued)
SID = 36 (Hotel Service)
TENANT 
NUMBER 
(TN)ACCESS CODE(ACC)MAXIMUM
6 DIGITS
CONNECTION 
STATUS INDEX
(CI) 
N/H/B
KIND OF 
SERVICE
(SRV)
SERVICE 
INDEX
(SID)
MAIDSTATUS 
(STATE)
1 – 63
SERVICE CONTENTS
NNormalSSC36
52Same Special Code Time Zone 
Connection Change
53Same Special Code Time Zone 
Connection Change
54Same Special Code Time Zone 
Connection Change
55Same...

Page 178

CHAPTER 4 NDA-24315
Page 166
Issue 1
AGSPL: Assignment of Guest Special Access Code for LDM
(a) Service Code (SRV = SSC) (Continued)
Note:When programming Floor Service data, ASYD SYS1 INDEX 165, bit 7 = 1 must have been assigned.
TENANT 
NUMBER 
(TN)ACCESS 
CODE
(ACC)
MAXIMUM6 DIGITS
CONNECTION STA-
TUS INDEX
(CI) N/H/B
KIND OF 
SERVICE 
(SRV)SERVICE
INDEX(SID)1 – 63
NUMBER OF 
NECESSARY
DIGITS(NND) 
FUSION 
POINT
CODE
(FPC)1-253
SERVICE CONTENTS
NNormalSSC37Priority Call 1
NNormalSSC38Priority Call 2...

Page 179

NDA-24315 CHAPTER 4
Page 167
Issue 1
AGSPL: Assignment of Guest Special Access Code for LDM
(a) Service Code (SRV = SSC) (Continued)
SID = 56 (Floor Service)
TENANT 
NUMBER 
(TN)ACCESS CODE
(ACC)MAXIMUM6 DIGITS
CONNECTION 
STATUS INDEX 
(CI) 
N/H/B
KIND OF 
SERVICE 
(SRV)SERVICE 
INDEX
(SID)
SERVICEINDEXNUMBER 
(No.1)0 – 15
SERVICE CONTENTS
NNormalSSC560
NNormalSSC561
NNormalSSC562
NNormalSSC563
NNormalSSC564
NNormalSSC565
NNormalSSC566
NNormalSSC567
NNormalSSC568
NNormalSSC569
NNormalSSC5610...

Page 180

CHAPTER 4 NDA-24315
Page 168
Issue 1
AGSPL: Assignment of Guest Special Access Code for LDM
(a) Service Code (SRV = SSC) (Continued)
TENANT 
NUMBER 
(TN)ACCESS CODE
(ACC)MAXIMUM6 DIGITS
CONNECTION 
STATUS INDEX
(CI)N/H/B
KIND OF 
SERVICE 
(SRV)SERVICE 
INDEX
(SID1 – 63
NUMBER OF 
NECESSARY 
DIGITS
(NND)
SERVICE CONTENTS
NNormalSSC57
Split Access (Same Number 
Access)
Note:Use the sheet on the 
next page for the 
actual data entry.
58
59
Not used
NNormalSSC60Attendant Manual Override
HHookingSSC61Call...
Start reading NEC Neax 2400 Ipx Hotel Office Data Specification

Related Manuals for NEC Neax 2400 Ipx Hotel Office Data Specification

All NEC manuals