Home > NEC > Communications System > NEC Neax 2400 Imx Message Center Interface Instruction Manual

NEC Neax 2400 Imx Message Center Interface Instruction Manual

Here you can view all the pages of manual NEC Neax 2400 Imx Message Center Interface Instruction Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 31

ND-70428 (E) CHAPTER 3
Page 25
Revision 1.0
MCI FOR LAN
2.6 Connection Sequence for System Changeover
Figure 3-21 shows the link release sequence used in response to a request from the client.
 
Figure 3-21   System Changeover Connection Sequence
Client (MC for LAN) Server (PBX)
Data transmitted
Data transmitted
Data transmitted
Connection request (CONNECT)
Connection accepted (ACCEPT)
** Text 
** Text 
** Text 
Note 1
Note 2
One side of system changed
over to the other
System equipment OK ARP cache...

Page 32

CHAPTER 3 ND-70428 (E)
Pag e 2 6
Revision 1.0
This page is for your notes. 

Page 33

ND -7 0428 ( E)  CHAPTER 4
CHAPTER 4  MESS AGE FORM AT
B
0000000011111111112222222222333333
D
C all  Typ e  No te  3
00000000011111111112222222222333333333377
S ourc e of  In fo rm ation   Cal lin g P arty   Calle d P arty
B
33344444444445555555555666666666677777777
0  :  C al lin g n um ber n ot pr ovid ed
8
Id e ntif ie r
D
C al l T yp e   N ote 3
(
(
(
(
(
( 

Page 34

CHAPTER 4 ND-70428 (E)
Pag e 2 8
Revision 1.0
MESSAGE FORMAT
Note 1:
• When the destination is a station
• When the destination is the attendant
• When the destination is a trunk
• When the destination is a trunk (a calling number provided)
0
Tenant Number I
D
blank Station
Number
1
Tenant Number I
D
Attendant Numberblank
2
Route Number
Tenant Number I
D
Trunk Number
3
Route Number
Tenant Number I
D
Trunk Number 

Page 35

ND-70428 (E) CHAPTER 4
Page 29
Revision 1.0
MESSAGE FORMAT
Note 2:
This information is valid when Source of Information is the attendant.
Note 3:Table 4-1 and Table 4-2 identify the call types.
 
Table 4-1  Call Type Codes for Attendant Incoming Calls
CALL TYPE 
CODECALL TYPE SOURCECALLING 
PARTY CALLED 
PA R T Y
10 Automatic Recall ATT STA/TRK STA
11 Attendant Camp-On ATT TRK STA
12 Call Forwarding-Don’t Answer ATT STA/TRK STA
13 Call Forwarding-Busy Line ATT STA/TRK STA
14 Call Forwarding-All Calls ATT...

Page 36

CHAPTER 4 ND-70428 (E)
Pag e 3 0
Revision 1.0
MESSAGE FORMAT
(2) MC PBX Message
• When Entry Index is A
• When Entry Index is B
Note 1:This information has the following meanings:
0: All MWL Off
1: MWL On for MC
2: MWL On for VMS
5: MWL Off for MC
6: MWL Off for VMS
Note 2:Table 4-3 explains the meaning of STA1 and STA2. The number of digits in the station number and the
tenant number of these stations must be the same.
Note 3:If the tenant number in the MWL control data is not used, default value of...

Page 37

ND-70428 (E) CHAPTER 4
Page 31
Revision 1.0
MESSAGE FORMAT
2. IMX FORMAT
(1) PBX MC Message
(a) Summary of format
 
(b) Data type list (see Table 4-4)
Table 4-4  PBX ® MC Data Type Explanation
Data Type Description Data Length
00 Not used —
01 Destination information (Source of information) 16 to 34
02 Loop number/Call type 04
03 Calling party information  16 to 34
04 Called party information 16 to 34
05 Extended calling party information 16 to 34
06 Calling number information 01 to 33
07 to 99 Not used...

Page 38

CHAPTER 4  ND -7 0428 ( E)
M ESS AG E F ORM AT
S our ce  of I nfor matio n
 N ote 2
18
C alli n g  nu m ber i nfo rm ation
18
C all ed p arty  inf orm ation   Note  1
S
Id en tifi e r
E
 ò ò
 ò ò
 ò ò
 ò ò
 ò ò
 ò ò
 ò ò
 ò ò
 ò ò
 ò ò 

Page 39

ND-70428 (E) CHAPTER 4
Page 33
Revision 1.0
MESSAGE FORMAT
Note 1:
• When the destination is a station
 
• When the destination is the attendant
 
• When the destination is a trunk
 
• When the destination is a trunk (a calling number provided)
 
Note 2:When the call type is 39 (wait request) or 66 (wait cancel), the information of data type (02) only is
transmitted. Table 4-5 and Table 4-6 show the call types.
0FPC
 (3 digits)Tenant
Number 
(3 digits)Station number
 (8 digits)User
group
number
 (3...

Page 40

CHAPTER 4 ND-70428 (E)
Pag e 3 4
Revision 1.0
MESSAGE FORMAT
Table 4-5  
Call Type Codes for Attendant Incoming Calls
CALL TYPE 
CODECALL TYPE SOURCECALLING 
PARTY CALLED 
PA R T Y
10 Automatic Recall ATT STA/TRK STA
11 Attendant Camp-On ATT TRK STA
12 Call Forwarding-Don’t Answer ATT STA/TRK STA
13 Call Forwarding-Busy Line ATT STA/TRK STA
14 Call Forwarding-All Calls ATT STA/TRK STA
15 Operator Call ATT STA --
16 House Phone ATT STA --
17 Off-Hook Alarm ATT STA --
20 Intercept Call to the Attendant ATT...
Start reading NEC Neax 2400 Imx Message Center Interface Instruction Manual

Related Manuals for NEC Neax 2400 Imx Message Center Interface Instruction Manual

All NEC manuals