Home > NEC > Communications System > NEC Name Display An Open Application Interface Installation Guide

NEC Name Display An Open Application Interface Installation Guide

Here you can view all the pages of manual NEC Name Display An Open Application Interface Installation Guide. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 1

NAME DISPLAY
  AN
OPEN APPLICATION INTERFACE (OAI)
INSTALLATION GUIDE
NEC America, Inc.
NDA-30011-003
Revision 3.0
December, 1996
Stock # 241718 

Page 2

LIABILITY DISCLAIMER
NEC America reserves the right to change the specifications,  functions, 
or features in this document at any time without notice.  NEC America 
has prepared this document for use by its employees and customers.  The 
information contained herein is the property of NEC  America and shall 
not be reproduced without prior written approval from NEC America.
Copyright 1996
NEC America, Inc. 

Page 3

NDA-30011  Revision 3.0Page i
Name Display Installation Guide CONTENTS
TABLE OF CONTENTS
Page
Chapter 1 - Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   1
Chapter 2 - Application Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3
Step 1 – Application Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
Step 2 – Primary...

Page 4

Page iiNDA-30011  Revision 3.0
CONTENTS Name Display Installation Guide
This Page Left Blank. 

Page 5

NDA-30011   Revision 3.0Page 1
Name Display Installation Guide Introduction
Chapter 1 Introduction
This guide provides specific field entries that need to be made in the process of 
installing and configuring Name Display. In addition to this guide, use the 
following manuals for this installation:
Applications Manager (APM) Installation Manual – Contains step-by-step 
instructions for installing the software from the release media.
Applications Manager (APM) Operations Manual – Explains how...

Page 6

Page 2NDA-30011   Revision 3.0
Introduction Name Display Installation Guide
The installation process, including its presentation in this manual and reference to 
other manuals that are necessary, is illustrated below.
Figure 1-1   Name Display Installation Requirements
Discussed in:Instructions In
Chapter 1Software InstallationAPM Installation
Introduction
Software Release MediaManual 
Chapter 2Application CharacteristicsAPM Operations
Application Configuration
Primary Parameter ConfigurationManual
OAI...

Page 7

NDA-30011   Revision 3.0Page 3
Name Display Installation Guide Application Configuration
Chapter 2 Application Configuration
Name Display is configured into the APM system using the Add function of the 
Application Configuration option on the APM System Administration menu. To 
access the Application Configuration option:
1. Enter the APM option from the APM Platform Management Menu.
2. Enter the System Administrator password at the APM password screen.
3. Enter the Application Configuration option from...

Page 8

Page 4NDA-30011   Revision 3.0
Application Configuration Name Display Installation Guide
Step 2 – Primary Configuration Parameters 
On the APM Configuration Entry screen, make the entries shown below to the 
parameters indicated: 
Parameter
EntryDescription
Application Name Name_Display  Indicates the name to be displayed 
in the APM menus. This name is 
displayed however it is entered 
here; i.e., capital letters, lowercase, 
etc.
Executable Filename /oai/app/namedisp Indicates the path name of the...

Page 9

NDA-30011   Revision 3.0Page 5
Name Display Installation Guide Application Configuration
Step 4 – Secondary OAI Configuration Parameters 
Using the OAI-Conf command on the APM Configuration Entry screen, make the 
entry shown for each of the following parameters required by Name
_Display. Use 
the instructions provided for this option in the APM Operations Manual:
Parameter
EntryDefinition
Database Name #1 /oai/db/cur/namefile Indicates the path name of the 
database containing the extension 
numbers,...

Page 10

Page 6NDA-30011   Revision 3.0
Application Configuration Name Display Installation Guide
Step 5 – User-defined Parameters
Make the following additional parameter entry through the UserDefined command 
on the APM Configuration Entry screen.
Parameter
EntryDefinition
        #1 16 The length of the Display Name 
field in the Name Display database 
(8 or 16 characters); this entry must 
agree with the size of the Display 
Name field in the database. (See 
Display Name in Field Definitions 
on page 8 for...
Start reading NEC Name Display An Open Application Interface Installation Guide

Related Manuals for NEC Name Display An Open Application Interface Installation Guide

All NEC manuals