NEC Multisync Pa241w Users Manual
Here you can view all the pages of manual NEC Multisync Pa241w Users Manual. The NEC manuals for Monitor are available online for free. You can easily download all the documents as PDF.
Page 21
![Page 21
English-19
English
B-SHARPNESS*1
(Analog input only) Adjusts the sharpness of the blue component of the image.
Press “LEFT” or “RIGHT” to adjust.
DVI Long Cable
(DVI input only) Compensates for image degradation caused by using a long DVI cable.
There are 4 possible settings, with “0” being the lowest level of \
compensation and “3”
being the highest level. The default setting is “1”.
Tag4*
1
(Analog
input only)
AUTO ADJUST*2 Automatically adjusts the Image Position and H.Size settings and Fine...](http://img.usermanuals.tech/thumb/54/52294/w300_nec_multisync_pa241w-user-s-manual-20.png "Page 21
English-19
English
B-SHARPNESS*1
(Analog input only) Adjusts the sharpness of the blue component of the image.
Press “LEFT” or “RIGHT” to adjust.
DVI Long Cable
(DVI input only) Compensates for image degradation caused by using a long DVI cable.
There are 4 possible settings, with “0” being the lowest level of \
compensation and “3”
being the highest level. The default setting is “1”.
Tag4*
1
(Analog
input only)
AUTO ADJUST*2 Automatically adjusts the Image Position and H.Size settings and Fine...")
English-19 English B-SHARPNESS*1 (Analog input only) Adjusts the sharpness of the blue component of the image. Press “LEFT” or “RIGHT” to adjust. DVI Long Cable (DVI input only) Compensates for image degradation caused by using a long DVI cable. There are 4 possible settings, with “0” being the lowest level of \ compensation and “3” being the highest level. The default setting is “1”. Tag4* 1 (Analog input only) AUTO ADJUST*2 Automatically adjusts the Image Position and H.Size settings and Fine...
Page 22
![Page 22
English-20
AUTO FINE*1
(Analog input only) This function automatically and periodically adjusts the “FINE” se\
tting for change in signal
condition. This function adjusts approximately every 33 minutes.
H.RESOLUTION Adjusts the horizontal size by increasing or decreasing the setting. Press “RIGHT” button to expand the width of the image on the scree\
n.
Press “LEFT” button to narrow the width of the image on the screen\
.
V.RESOLUTION Adjusts the vertical size by increasing or decreasing the...](http://img.usermanuals.tech/thumb/54/52294/w300_nec_multisync_pa241w-user-s-manual-21.png "Page 22
English-20
AUTO FINE*1
(Analog input only) This function automatically and periodically adjusts the “FINE” se\
tting for change in signal
condition. This function adjusts approximately every 33 minutes.
H.RESOLUTION Adjusts the horizontal size by increasing or decreasing the setting. Press “RIGHT” button to expand the width of the image on the scree\
n.
Press “LEFT” button to narrow the width of the image on the screen\
.
V.RESOLUTION Adjusts the vertical size by increasing or decreasing the...")
English-20 AUTO FINE*1 (Analog input only) This function automatically and periodically adjusts the “FINE” se\ tting for change in signal condition. This function adjusts approximately every 33 minutes. H.RESOLUTION Adjusts the horizontal size by increasing or decreasing the setting. Press “RIGHT” button to expand the width of the image on the scree\ n. Press “LEFT” button to narrow the width of the image on the screen\ . V.RESOLUTION Adjusts the vertical size by increasing or decreasing the...
Page 23
![Page 23
English-21
English
OFF MODE SETTING Adjusts the ILLUMINANCE value for OFF MODE. Shows illuminance.
LED BRIGHTNESS*
2Controls the brightness of the power LED on the monitor.
LED COLOR*
2Toggles the power LED on the front between blue or green.
Tag7 LANGUAGE*
2 OSD control menus are available in nine languages. Press “LEFT” or\
“RIGHT” to select.
OSD H.POSITION You can choose where you would like the OSD control image to appear on yo\
ur screen.
Selecting OSD Location allows you to manually adjust the...](http://img.usermanuals.tech/thumb/54/52294/w300_nec_multisync_pa241w-user-s-manual-22.png "Page 23
English-21
English
OFF MODE SETTING Adjusts the ILLUMINANCE value for OFF MODE. Shows illuminance.
LED BRIGHTNESS*
2Controls the brightness of the power LED on the monitor.
LED COLOR*
2Toggles the power LED on the front between blue or green.
Tag7 LANGUAGE*
2 OSD control menus are available in nine languages. Press “LEFT” or\
“RIGHT” to select.
OSD H.POSITION You can choose where you would like the OSD control image to appear on yo\
ur screen.
Selecting OSD Location allows you to manually adjust the...")
English-21 English OFF MODE SETTING Adjusts the ILLUMINANCE value for OFF MODE. Shows illuminance. LED BRIGHTNESS* 2Controls the brightness of the power LED on the monitor. LED COLOR* 2Toggles the power LED on the front between blue or green. Tag7 LANGUAGE* 2 OSD control menus are available in nine languages. Press “LEFT” or\ “RIGHT” to select. OSD H.POSITION You can choose where you would like the OSD control image to appear on yo\ ur screen. Selecting OSD Location allows you to manually adjust the...
Page 24
English-22 PIP DOWN/UPWhen you select “PIP” in PIP MODE, you can control vertical position of PIP display area. PIP SIZE Selects the size of the sub-picture used in PIP mode. BLANK SIGNAL SKIP Skip no signal inputs when you change input signal with INPUT button. OSD ROTATION AUTO: The OSD rotates automatically when the monitor is rotated. OSD ROTATION is set to AUTO by default. LANDSCAPE: Display the OSD with landscape mode. PORTRAIT: Display the OSD with portrait mode. IMAGE ROTATION AUTO: The main...
Page 25
![Page 25
English-23
English
TagA TILE MATRIX The Tile Matrix feature allows one image to be displayed over multiple screen\
s. This feature can be used with up to 25 monitors (5 vertical and 5 horizontal\
). Using Tile Matrix
requires the PC output signal be sent through a distribution ampli er to each individual
monitor.
H MONITOR: Select the number of horizontal displays.
V MONITOR: Select the number of vertical displays.
MONITOR No: Select a position to expand the screen.
TILE COMP: Works in tandem with...](http://img.usermanuals.tech/thumb/54/52294/w300_nec_multisync_pa241w-user-s-manual-24.png "Page 25
English-23
English
TagA TILE MATRIX The Tile Matrix feature allows one image to be displayed over multiple screen\
s. This feature can be used with up to 25 monitors (5 vertical and 5 horizontal\
). Using Tile Matrix
requires the PC output signal be sent through a distribution ampli er to each individual
monitor.
H MONITOR: Select the number of horizontal displays.
V MONITOR: Select the number of vertical displays.
MONITOR No: Select a position to expand the screen.
TILE COMP: Works in tandem with...")
English-23 English TagA TILE MATRIX The Tile Matrix feature allows one image to be displayed over multiple screen\ s. This feature can be used with up to 25 monitors (5 vertical and 5 horizontal\ ). Using Tile Matrix requires the PC output signal be sent through a distribution ampli er to each individual monitor. H MONITOR: Select the number of horizontal displays. V MONITOR: Select the number of vertical displays. MONITOR No: Select a position to expand the screen. TILE COMP: Works in tandem with...
Page 26
![Page 26
English-24
Recommended use
Safety Precautions and MaintenanceFOR OPTIMUM PERFORMANCE, PLEASE NOTETHE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOR MONITOR:
• DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing cover\
s may expose
you to dangerous shock hazards or other risks. Refer all servicing to qu\
ali ed service personnel.
Do not spill any liquids into the cabinet or use your monitor near water\
.
Do not insert objects of any kind into the cabinet...](http://img.usermanuals.tech/thumb/54/52294/w300_nec_multisync_pa241w-user-s-manual-25.png "Page 26
English-24
Recommended use
Safety Precautions and MaintenanceFOR OPTIMUM PERFORMANCE, PLEASE NOTETHE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOR MONITOR:
• DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing cover\
s may expose
you to dangerous shock hazards or other risks. Refer all servicing to qu\
ali ed service personnel.
Do not spill any liquids into the cabinet or use your monitor near water\
.
Do not insert objects of any kind into the cabinet...")
English-24 Recommended use Safety Precautions and MaintenanceFOR OPTIMUM PERFORMANCE, PLEASE NOTETHE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing cover\ s may expose you to dangerous shock hazards or other risks. Refer all servicing to qu\ ali ed service personnel. Do not spill any liquids into the cabinet or use your monitor near water\ . Do not insert objects of any kind into the cabinet...
Page 27
![Page 27
English-25
English
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CANREDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR:
For optimum performance, allow 20 minutes for the display to warm up.
Adjust the monitor height so that the top of the screen is at or slightl\
y below eye level. Your eyes should look slightly downward when viewing the middle of the sc\
reen.
Position your monitor no closer than 40 cm (15.75 inches) and no furth\
er away than 70 cm (27.56...](http://img.usermanuals.tech/thumb/54/52294/w300_nec_multisync_pa241w-user-s-manual-26.png "Page 27
English-25
English
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CANREDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR:
For optimum performance, allow 20 minutes for the display to warm up.
Adjust the monitor height so that the top of the screen is at or slightl\
y below eye level. Your eyes should look slightly downward when viewing the middle of the sc\
reen.
Position your monitor no closer than 40 cm (15.75 inches) and no furth\
er away than 70 cm (27.56...")
English-25 English CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CANREDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: For optimum performance, allow 20 minutes for the display to warm up. Adjust the monitor height so that the top of the screen is at or slightl\ y below eye level. Your eyes should look slightly downward when viewing the middle of the sc\ reen. Position your monitor no closer than 40 cm (15.75 inches) and no furth\ er away than 70 cm (27.56...
Page 28
English-26 Specifi cations - PA231W Monitor Specifi cations MultiSync PA231W Notes LCD Module Diagonal: Viewable Image Size: Native Resolution (Pixel Count): 58.4 cm/23.0 inches 58.4 cm/23.0 inches 1920 x 1080 Active matrix; thin lm transistor (TFT) liquid crystal display (LCD); 0.265 mm dot pitch; 270 cd/m2 white luminance; 1000:1 contrast ratio (typical). Input Signal DisplayPort: DisplayPort Connector: Digital RGB DisplayPort Complies with Standard V1.1a, applicable to HDCP DVI: DVI-D...
Page 29
English-27 English Specifi cations - PA241W Monitor Specifi cations MultiSync PA241W Notes LCD Module Diagonal: Viewable Image Size: Native Resolution (Pixel Count): 61.1 cm/24.1 inches 61.1 cm/24.1 inches 1920 x 1200 Active matrix; thin lm transistor (TFT) liquid crystal display (LCD); 0.270 mm dot pitch; 360 cd/m2 white luminance; 1000:1 contrast ratio (typical). Input Signal DisplayPort: DisplayPort Connector: Digital RGB DisplayPort Complies with Standard V1.1a, applicable to HDCP DVI:...
Page 30
English-28 Specifi cations - PA271W Monitor Specifi cations MultiSync PA271W Notes LCD Module Diagonal: Viewable Image Size: Native Resolution (Pixel Count): 68.5 cm/27.0 inches 68.5 cm/27.0 inches 2560 x 1440 Active matrix; thin lm transistor (TFT) liquid crystal display (LCD); 0.233 mm dot pitch; 300 cd/m2 white luminance; 1000:1 contrast ratio (typical). Input Signal DisplayPort: DisplayPort Connector: Digital RGB DisplayPort Complies with Standard V1.1a, applicable to HDCP DVI: DVI-D...