NEC Multisync Pa241w Users Manual

English-9
English
Controls
OSD (On-Screen Display) control buttons on the front of the monitor 
function as follows:
To access OSD menu, press the MENU button.
To change signal input, press the SELECT button.
NOTE: OSD must be closed in order to change signal input.
123456
7
8
9
Landscape
Portrait
1  AUTO DIMMING  
 SENSORDetects the level of ambient lighting allowing the monitor to make adjus\
tments to various 
settings resulting in a more comfortable viewing experience. Do not cove\
r this sensor.
2...

English-10
 Brightness/Contrast Controls
BRIGHTNESS
Adjusts the overall image and background screen brightness.
NOTE:  The brightness level is adjusted using the backlight output.
  The display will digitally compensate for low or high brightness levels.\
  If digital compensation occurs, the brightness value on the OSD will cha\
nge to magenta.
NOTE:   The optimal display performance will be in the range where the OSD brigh\
tness value is black. When the    
  display cannot achieve the desired...

English-11
English
FINE (Analog input only)*1
Improves focus, clarity and image stability by increasing or decreasing \
this setting.
If the “Auto Adjust function” and the “H.Size” function do not give you a sa\
tisfactory picture setting, a  ne tuning can be 
performed using the “Fine” function. 
For this a Moiré test pattern could be used. If the Fine value is wro\
ngly calibrated, the result would look like the left 
drawing. The image should be homogeneous.
When FINE value is wrong. When FINE value...

English-12
 Tools
PIP MODE
Select PIP MODE, OFF/PIP/PICTURE BY PICTURE - ASPECT/PICTURE BY PICTURE - FULL. 
You can select individual PICTURE MODE in each screen. 
This display can display 2 inputs at a time.
 
PIP*2OFFPICTURE BY 
PICTURE - ASPECT*3PICTURE BY 
PICTURE - FULL*3
IMAGE ROTATION: ON / SUB IMAGE ROTATION: ON 
 
PIP*1OFF*1PICTURE BY 
PICTURE - ASPECT*3PICTURE BY 
PICTURE - FULL*3
PIP INPUT
Selects the PIP input signal.
PIP LEFT/RIGHT
Controls the horizontal position of the Picture in Picture...

English-13
English
OFF TIMER
Monitor will automatically power-down when you have selected a pre-deter\
mined amount of time. 
Before powering off, a message will appear on the screen asking if you want to delay the t\
urn off time by 60 minutes. 
Press any OSD button to delay the power-down time.
OFF MODE
The Intelligent Power Manager allows the monitor to enter into a power s\
aving mode after a period of inactivity. 
The OFF MODE has three settings.
OFF: Monitor does not go into power save mode when...

English-14
FACTORY PRESET
Selecting Factory Preset allows you to reset all OSD control settings (\
BRIGHTNESS, CONTRAST*1, ECOMODE, 
BLACK, IMAGE CONTROL, COLOR CONTROL SYSTEM, SHARPNESS, PIP MODE, PIP INPUT, PIP LEFT/RIGHT, 
PIP DOWN/UP, PIP SIZE, USB SELECTION, EDID EXTENSION, OFF TIMER, OFF MODE, OSD LEFT/RIGHT, 
OSD UP/DOWN, OSD TURN OFF, OSD TRANSPARENCY) back to the factory settings. Individual settings can be 
reset by highlighting the control to be reset and pressing the RESET button.
NOTE:   If...

English-15
English
Using the PICTURE MODE function
Choose the Picture mode that is most suitable for the type of content th\
at is shown.
There are several types of mode (sRGB, Adobe®RGB*2, DCI*2, REC-Bt709, HIGH BRIGHT, FULL, DICOM*3, 
PROGRAMMABLE).
 Each PICTURE MODE includes BRIGHTNESS, AUTO BRIGHTNESS, WHITE, Color Gamut, GAMMA, BLACK,  UNIFORMITY, COLOR VISION EMU, METAMERISM, RESPONSE IMPROVE, AMBIENT LIGHT COMP., 6-Axis ADJUST 
settings. You can change these settings in Tag1 advanced menu....

English-16
Advanced OSD
If you need detailed information about the controls, please use the adva\
nced menu.
There are 2 ways to access the advanced menu.
Way 1:

 Press the Menu button to access OSD menu. Use the front buttons to move \
the cursor to the ADVANCED SETTING in Color control systems. Press INPUT button to appear advanced menu.

 Press the EXIT button.
Way 2:

 Turn off the monitor.
 Turn on the monitor by pushing the “POWER” and “INPUT/SELECT”\
 button at the same time for at least one...

English-17
English
GAMMA Allows you to manually select the brightness level of grayscale. There are  ve selections: sRGB, L Star, DICOM*3, PROGRAMMABLE and CUSTOM. We recommend to show 
grayscale image data on screen.
sRGB: GAMMA setting for sRGB.
L Star: GAMMA setting for eciRGB_v2*
2 and Lab color space.
DICOM*3: DICOM GSDF (Grayscale Standard Display Function) is typically used f\
or 
medical imaging.
PROGRAMMABLE: The brightness of grayscale can be changed to your preference 
by downloading the...

English-18
UNIFORMITY This function electronically compensates for the slight variations in th\
e white uniformity level as well as for deviations in color that may occur throughout the d\
isplay area of 
the screen. These variations are characteristic of LCD panel technology. This function 
improves the color and evens out the luminance uniformity of the display\
.
 NOTE: Using the UNIFORMITY feature does reduce the overall peak luminance of the 
display. If greater luminance is desired over the...