NEC Multisync P701 Users Manual

English-29
English
3. Press the “DISPLAY” button on the remote control while aiming at the “PRIMARY” monitor. The Information OSD will be shown attop left side of the screen.
Monitor ID:  Displays the ID number of the current monitor within the daisy chain.
Target ID:  Displays the ID number of the monitor that to be controlled via daisy c\
hain from the current monitor.
Press the “+” or “-” buttons to change the “Target ID” to show the ID number of the monitor to be controlled. To control the en tire...

English-30
This LCD monitor can be controlled by connecting a personal computer wit\
h a RS-232C terminal.
NOTE:When you use this function, EXTERNAL CONTROL should be “RS-232C” (\
See page 24).
Functions that can be controlled by a personal computer are:
• Power ON or OFF
• Switching between input signals
Connection
LCD Monitor + PC
NOTE: If your PC is equipped only with a 25-pin serial port connector, a 25-pin serial port adapter is required. Contact your
dealer for details.
* In order to function, the...

English-31
EnglishConnecting to a Network
Using a LAN cable allows you to specify the Network Settings and the Alert Mail Settings by using an HTTP server function.
NOTE:When you use this function, EXTERNAL CONTROL should be “LAN” (See\
 page 24).
To use a LAN connection, you are required to assign an IP address.
Example of LAN connection:
Controlling the LCD monitor via LAN Control
Server
Hub NOTE: Use a category 5 or higher LAN cable.
LAN cable
(not supplied)
Network Setting by Using an HTTP Browser...

English-32
Preparation Before Use
Connect the monitor to a commercially available LAN cable before engagin\
g in browser operations.
Operation with a browser that uses a proxy server may not be possible de\
pending on the type of proxy server and the setting
method. Although the type of proxy server will be a factor, it is possible that items that have actually been set will not be
displayed depending on the effectiveness of the cache, and the contents set from the browser may not \
be reflected in...

English-33
English
Alert Mail Setting
http:///lanconfig.htmlType in the hostname of the network connected to the monitor.
Up to 60 alphanumeric characters can be used.
Type in the domain name of the network connected to the monitor.
Up to 60 alphanumeric characters can be used.
Checking [ENABLE] will turn on the Alert Mail feature.
Checking [DISABLE] will turn off the Alert Mail feature.
Type in the senders address. Up to 60 alphanumeric and symbols characters\
 can be used.
Type in the SMTP server name...

English-34
Reduced Footprint: 
Provides the ideal solution for environments requiring superior image qu\
ality but with size and weight
limitations.
Color Control Systems:  Allows you to adjust the colors on your screen and customize the color a\
ccuracy of your monitor to
a variety of standards.
OmniColor:  Combines Six-axis color control and the sRGB standard. Six-axis color c\
ontrol permits color adjustments via six
axes (R, G, B, C, M and Y) rather than through the three axes (R, G and B)...

English-35
EnglishNo picture
• The signal cable should be completely connected to thedisplay card/computer.
• The display card should be completely seated in its slot.
• Front Power Switch and computer power switch should be in the ON position.
• Check to make sure that a supported mode has been selected on the display card or system being used.
(Please consult display card or system manual to
change graphics mode.)
• Check the monitor and your display card with respect to compatibility and recommended...

English-36
Specifications
Product Specifications
LCD Module 70" /177.8 cm diagonalPixel Pitch: 0.807 mm
Resolution: 1920 x 1080 Color: Over 16 million colors (depending on video card used)
Brightness: 420 cd/m
2 (typ), 600 cd/m2 (MAX)
Contrast Ratio: 2000:1 Viewing Angle: 89° (typ) @ CR>10
Design View Distance: 1500 mm/59.1 inches
Frequency Horizontal: 15.625/15.734 kHz, 31.5 kHz - 91.1 kHz (Analog Input) 31.5 kHz - 91.1 kHz (Digital Input)
Vertical: 50.0 - 85.0 Hz
Pixel Clock 25.2 MHz - 162.0 MHz...

English-37
English1) RS-232C input/output
Pin No Name
1 connected to 7&8
2 RXD
3 TXD
4 connected to 6
5GND
6 connected to 4
7 connected to 1&8
8 connected to 1&7
9NC
1
6 5
9
D-SUB 9P
This LCD monitor uses RXD, TXD and GND lines for RS-232C control.
2) REMOTE IN
Pin Assignment
3) REMOTE OUT
 

English-38
NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees re\
cycling as one of the company’s
top priorities in trying to minimize the burden placed on the environmen\
t. We are engaged in developing environmentally-
friendly products, and always strive to help define and comply with the \
latest independent standards from agencies such as
ISO (International Organisation for Standardization) and TCO (Swedish Trades Union).
Disposing of your old NEC product
The aim of...