NEC Multisync Lcd5710 Users Manual

English-9
English1. Determine the installation location
CAUTION:DO NOT ATTEMPT TO INSTALL THE LCD
MONITOR BY YOURSELF.
Installing your LCD display must be done by a qualified
technician. Contact your dealer for more information.
CAUTION:MOVING OR INSTALLING THE LCD MONITOR
MUST BE DONE BY TWO OR MORE PEOPLE.
It is recommended that 4 people move or install
the LCD Monitor, due to its weight of almost
63.0kg.
Failure to follow this caution may result in injury if the LCD
monitor falls.
CAUTION:Do not mount...

English-10
9. Adjust the image (See pages 20-28)
Make adjustments when picture adjustment such as the
brightness or contrast is required.
10. Recommended Adjustment
To reduce the risk of “image persistence”, please adjust the
following items based on the application being used.
“SCREEN SAVER” (See page 24), “SIDE BORDER COLOR”
(See page 24), “DATE & TIME” (See page 28), “SCHEDULE”
(See page 28).
11.Installing and removing stand
CAUTION:Installing and removing the stand must be done
by two or more people....

English-11
English
4. To avoid falling down
Fasten the LCD monitor to wall using a cord or chain,
which is sufficient to support the weight of the LCD monitor
(approx. 63.0kg). The wall must be strong enough to support
the monitor and mounting accessories.
Before moving the LCD monitor, the cord or chain should be
removed.
5. To prevent the main power switch from
being changed
To prevent the ability to use the main power switch, please
attach the main switch, which is enclosed as an accessory.
NOTE:With...

English-12
Mounting Position of Ferrite Core
Ferrite Core
To connector of PC To AUDIO 1 of monitor
Attaching the Ferrite Core
Attach the Ferrite Core to PC Audio Cable.
Use of the cable without mounting the ferrite core will result in the
occurrence of noise.
1Open the ferrite core and clamp it
on the PC Audio cable.2 Close the ferrite core. Attach the two Ferrite Cores to the both ends of PC Audio Cable.
For PC Audio Cable
Ferrite Core
Connections
Before making connections:
*First turn off the power of...

English-13
English
Connecting a Personal Computer
Connecting your computer to your LCD monitor will enable you to display your computer’s screen image.
Some video cards and pixel clock over 165MHz may not display an image correctly.
Your LCD monitor displays proper image adjusting the factory preset timing signal automatically.

Connect the LCD Monitor to a Personal Computer
•To connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor, use the supplied PC - Video RGB signal
cable (mini D-sub...

English-14 Connecting your Macintosh computer to your LCD monitor will enable you to display your computer’s screen image. Some
video cards or drivers may not display images correctly.
Connect the LCD Monitor to Macintosh
•To connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor, use the supplied PC - Video RGB signal
cable (mini D-sub 15 pin to mini D-sub 15 pin).
•To connect the RGB 3 IN connector (BNC) on the LCD monitor, use the signal cable available separately (mini D-sub
15 pin to...

English-15
English
LCD monitor
Equipment with a
digital interface such
as a personal
computer with RGB
output (TMDS)
DVI-D connector
DVI-D connector
To DVI output
To audio output
Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual
Interface) standard.
Connect the LCD Monitor to a Computer with a Digital Output
•The RGB 1 IN connector also accepts a DVI-D cable.
•Input TMDS signals conforming to DVI standards.
•To maintain display...

English-16
Connecting your DVD player to your LCD monitor will enable you to display DVD video.
Refer to your DVD player user’s manual for more information.
Connect the LCD Monitor to a DVD Player
•To connect the DVD/HD IN connector (BNC) on the LCD monitor, use a separately available BNC connector cable. You will
need a BNC-to-RCA adapter to connect a DVD player with an RCA pin jack to the BNC connector cable (not provided).
Some DVD players may have different connectors such as DVI-D connector.
Select...

English-17
English
You can connect your stereo amplifier to your LCD monitor. Refer to your amplifier owner’s manual for more information.
Connect the LCD Monitor to a Stereo Amplifier
•Turn on the LCD monitor and the amplifier only after all connections have been made.
•Use an RCA cable to connect the AUDIO OUT connector (RCA) on the LCD monitor and the audio input on the amplifier.
•Do not reverse the audio left and right jacks.
•The AUDIO IN is used for audio input.
•The AUDIO OUT jack outputs sound...

English-18
Basic Operation
Power ON and OFF Modes
The LCD monitor power indicator will turn green while powered on, or red when in off mode. The monitor can be powered on
or off using the following three options:
1. Pressing the power button.
Note:Before pressing the power button, be sure to turn
on the Main Power Switch on the LCD monitor.
Main Power SwitchPower Button
2. Using the remote control.
Note:Before operating the remote control, be sure to turn
on the Main Power Switch on the LCD monitor.
3....