NEC Multisync Lcd5710 Users Manual

User’s Manual
MultiSync LCD5710
57 LCD Colour Monitor
This monitor is designed to operate in landscape orientation only. Do not use in portrait orientation.
Using the monitor in portrait position can cause damage to the display and will void the warranty of the product.
 

Index
Declaration of conformity ............................................................................................................................. English-1
Important Information ................................................................................................................................... English-2
Warning, Caution ......................................................................................................................................... English-2
Declaration...

English-1
English
DECLARATION OF CONFORMITY
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
U.S. Responsible Party: NEC Display Solutions of America, Inc.
Address: 500 Park Boulevard, Suite 1100
Itasca, Illinois 60143
Tel. No.: (630) 467-3000
Type of Product: Computer Monitor...

English-2
Declaration
Declaration of the Manufacturer
We hereby certify that the colour monitor MultiSync
LCD5710 (L576RX) is in compliance with
Council Directive 73/23/EEC:
– EN 60950-1
Council Directive 89/336/EEC:
– EN 55022
– EN 61000-3-2
– EN 61000-3-3
– EN 55024and marked with
NEC Display Solutions, Ltd.
4-13-23, Shibaura,
Minato-Ku
Tokyo 108-0023, Japan
Important Information
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT
USE THIS UNIT’S POLARIZED PLUG...

English-3
EnglishFOR OPTIMUM PERFORMANCE, PLEASE NOTE
THE FOLLOWING WHEN SETTING UP AND USING
THE MULTISYNC LCD5710 LCD COLOUR MONITOR:
•DO NOT OPEN THE MONITOR. There are no user
serviceable parts inside and opening or removing covers
may expose you to dangerous shock hazards or other risks.
Refer all servicing to qualified service personnel.
•Do not spill any liquids into the cabinet or use your monitor
near water.
•Do not insert objects of any kind into the cabinet slots, as
they may touch dangerous...

English-4
Contents
Power Cord
User’s ManualVideo Signal Cable
(D-SUB to D-SUB Cable)
Wireless Remote Control
and AA  BatteriesClamper x 3
Your new MultiSync LCD5710 monitor box* should contain the following:
•LCD monitor
•Power Cord
•Video Signal Cable
•User’s Manual
•Wireless Remote Control and AA Batteries
•Clamper x 3
•Screw (M4 x 8) x 4
•CD-ROM•Band x 2
•Ferrite Core x 2
•Speaker Plug x 1set 
(Required for optional Loudspeakers)
•Stand for the Independence x 2
•Thumbscrew for stand x 2
•Main switch...

English-5
English
81234567
EXITMUTEINPUT
10
EXITMUTE INPUT9
7 DOWN () button
Activates the OSM menu when the OSM menu is turned-off.
Acts as 
 button to move the highlighted area down to
select the adjustment with OSM menu.
8 EXIT button
Activates the OSM menu when the OSM menu is turned-off.
Acts as EXIT button to move to previous menu with OSM
menu.
9 Remote control sensor and Power Indicator
Receives the signal from the remote control (when using the
wireless remote control). See also page 8.
Glows...

English-6
Terminal Panel
7 AUDIO IN 1, 2, 3
To input audio signal from external equipment such as a
computer, VCR or DVD player.
8 AUDIO OUT
To output the audio signal from the AUDIO IN 1, 2 and 3 jack.
9 VIDEO INPUT/OUTPUT Connector
VIDEO IN connector (BNC and RCA): To input a composite
video signal. BNC and RCA connectors are not available at
the same time. (Use only one input).
VIDEO OUT connector (BNC): To output the composite
video signal from the VIDEO IN connector.
S-VIDEO IN connector (DIN 4...

English-7
English
1 POWER button
Switches the power on/off.
* If Power Indicator is not glowing, then no controls will
work.
2 INPUT button
Selects from input signal, [RGB1], [RGB2], [RGB3],
[DVD/HD], [VIDEO] or [VIDEO].
[VIDEO] is enabled by selecting the “SEPARATE” mode
in the OSM or by having the “S-VIDEO” cable connected
with the “S-VIDEO” signal present and selecting “PRIORITY”
MODE. See page 26.
3 AUDIO INPUT button
Selects from input audio signal, [AUDIO1], [AUDIO2],
[AUDIO3].
4 SIZE button...

English-8 Point the top of the remote control toward the LCD monitor’s
remote sensor during button operation.
Use the remote control within a distance of about 7 m/23 ft.
from the front of the LCD monitor’s remote control sensor
and at a horizontal and vertical angle of within 30° within a
distance of about 3 m/10 ft.
Operating Range for the Remote Control
Caution:Important, the remote control system may not
function when direct sunlight or strong
illumination strikes the remote control sensor of
the LCD...