NEC Multisync Lcd24wmgx3 Users Manual

English-19
English
4. Adjust the Overscan ratio (Page 30).
In the OSD Screen, choose [MONITOR SETTING] 
-> [OVERSCAN], then the appropriate
aspect ratio.
If [FULL (100%)] is chosen, some image may show some noise on the edge.
This noise can be reduced by changing the [OVERSCAN] setting.
Note:•When an option other than [FULL (100%)] is chosen for [OVERSCAN],
the PIP Function may not be available.
•[OVERSCAN] cannot be adjusted when Through Mode is on.
5. Adjust the screen size (Page 25 and 30).
In the OSD...

English-20 This monitor is equipped with OSD (On Screen Display) functions, which enable easy adjustment of the screen.
By using the menus displayed on the screen through the OSD functions, adjustments of the screen, such as brightness, etc.,
can be made.
Configuration of the OSD Screen
The configuration of the OSD Screen is as shown below.
Monitor Settings (OSD Functions)
Group Icon Screen
The selected group icon is highlighted.
Configuration of group icons (when PC input is selected)
The configuration...

English-21
English
Configuration of group icons (when HDMI/Video Input is selected)
The configuration of each of the group icons is as shown below. For details on the options, refer to the page that is listed for
the explanation on each of the group icons.
*4: For HDMI input only
*5: For VIDEO1 input only
*6: For VIDEO2 input only
INFORMATION (P33)
DISPLAY MODEAUDIO SETTINGS (P33)
TREBLE
BASS
BALANCE
SURROUND
AUDIO INPUT
VOLUME
PIP SETTINGS (P33)
PIP ON/OFF
PIP SIZE
PIP POSITIONPICTURE SETTINGS (P30)
DV...

English-22
2. Move the  button of the monitor in the  direction, or
press the 
 control button on the remote control to
display the Options Screen.
The option that is currently selected changes to reversed
display and is highlighted in blue, and the Adjustment
Screen is displayed.
Note:•To cancel the operation, press the MENU/EXIT
button on the monitor or the remote control to
return to the Group Icon Screen.
3. Move the 
 button of the monitor in the  direction, or
press the 
 control button on the...

English-23
English
Options for OSD Functions (for PC Input)
Here, the details of each option are explained.
Picture Settings
DV MODE (Dynamic Visual Mode)
It is possible to switch the DV MODE according to your taste.
STANDARD1 (Default setting): Standard setting.
STANDARD2: Standard setting. SATURATION and HUE in Color Control can be adjusted.
Text: Setting where the overall brightness is subdued, best suited for regular word processing and spreadsheet
software, etc. The default color temperature setting...

English-24
AUTO CONTRAST (For D-SUB (RGB) input only)
The contrast is automatically adjusted. For detailed procedures on automatic adjustments, refer to “Performing Auto
Adjust” (Page 17).
WHITE LEVEL (For D-SUB input only)
The white level is automatically adjusted. Make adjustments by focusing on a bright part of the screen.
BLACK LEVEL (For D-SUB/DVI (AV) input only)
The black level is automatically adjusted. Make adjustments by focusing on a dark part of the screen.
INPUT TYPE (For DVI (AV) input only...

English-25
English
Monitor Settings
AUTO ADJUST (For D-SUB (RGB) input only)
The display position in the horizontal and vertical directions, horizontal size, and phase are automatically adjusted.
For detailed procedures on automatic adjustments, refer to “Performing Auto Adjust” (Page 17).
SCREEN SIZE
Function that automatically expands the display screen. This function is enabled when the resolution of the input
signal is lower than the number of display pixels.
Full: The input picture signal is...

English-26
1, 2, 3
For the settings for 1, 2, and 3, the ratio of each of the colors (RED, GREEN, and BLUE) can be adjusted by moving
the 
 button in the   directions.
GAIN: The color strength can be adjusted for each of the colors*
1. Making this value larger results in the selected
color becoming more vivid.
OFFSET: The black level can be adjusted for each of the colors*
1. Making this value larger results in the selected
color becoming brighter.
SATURATION: The color strength can be adjusted. Making...

English-27
English
VOLUME
Move the  button in the   directions to adjust the volume.
Turn the mute function on or off by pressing the center of the 
 button.
NOTE:This monitor does not support double audio (bilingual audio).
PIP Settings
PIP ON/OFF
Select which input signal to display as the sub-screen inside the regular screen. When Off is selected, the PIP
function is disabled.
The PIP (Picture-in-Picture) function displays a sub-screen inside the main screen, enabling the user to view the
computer...

English-28
AUTO INPUT SWITCHING
Function that automatically selects a socket with an input signal in cases where there are multiple inputs.
The selected socket can be confirmed in Information on the OSD Screen.
ON: When there is no longer an input signal from the socket that is currently displayed, the display automatically
changes if a signal from another socket is input.
OFF: Automatic switching of the input signal display is not performed.
NOTE:•This function is supported only for PC connections (DVI...