Home > NEC > Monitor > NEC Multisync Lcd24wmgx3 Users Manual

NEC Multisync Lcd24wmgx3 Users Manual

Here you can view all the pages of manual NEC Multisync Lcd24wmgx3 Users Manual. The NEC manuals for Monitor are available online for free. You can easily download all the documents as PDF.

Page 1

MultiSync 24WMGX
3
User’s Manual
 

Page 2

Index
Important Information ................................................................................................................................... English-1
Registration Information ............................................................................................................................... English-1
Preparation .................................................................................................................................................. English-3
What...

Page 3

English-1
English
Important Information
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT
USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS
THE PRONGS CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM
WALL SOCKET. TO FULLY...

Page 4

English-2
Canadian Department of Communications Compliance Statement
DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No. 60950-1.
FCC Information
1. Use the attached specified cables with the MultiSync 24WMGX3 (L248HU) color monitor so as not to interfere with radio
and television reception.
(1) Please use the supplied power cord...

Page 5

English-3
EnglishWhat You Can Do with This Monitor…
See low-light movie scenes more clearly and add more definition to digital camera images
•Dynamic Visual (DV) Mode: Pages 5, 7, 23 and 30
Dynamic Visual (DV) Mode provides the optimum image quality for different types of content, including movies, games,
photographs, and documents. Eight modes are available for PC Input or HDMI Input, and five modes are available for
Video Input.
Watch motion images clearly and sharply
•Motion Picture (MP) Mode: Pages...

Page 6

English-4
Audio cable
The following accessories are included in the shipment (Contact your dealer if anything is missing or damaged):
•User’s Manual
•Power cord
•Rear cover
•Audio cable
•HDMI cable•Mini D-Sub 15 pin – Mini D-Sub 15 pin signal cable
(for analog connection)
•DVI-D – DVI-D signal cable (for digital connection)
•Remote controller with two AAA batteries
•Setup Manual
PC Input
*1 Install the specified driver when using Windows.
*2 Macintosh’s output sockets may vary according to the model....

Page 7

English-5
English
5 Brightness Sensor
This sensor detects the room brightness.
Then sensor becomes active when the Brightness Sensor is turned
on (Page 24 and 30).
Do not leave in the shadow when using the Brightness Sensor.
6 Control Button ()
When OSD Screen Not Shown (Hot Key Function): Pressing the
top or bottom of the button controls the audio volume.
Pressing the right or left of the button controls the brightness.
Pressing the middle of the button turns mute on and off.
When OSD Screen Shown:...

Page 8

English-6
Rear Panel
9 PC Audio Input
Connect a commercially available audio cable from a
computer output to this input.
10 Signal Input (D-Sub)
Connect a mini D-Sub 15 pin cable.
11 Signal Input (DVD-D)
Connect a DVI-D cable.
12 Rear cover
Covers up the sockets and keeps the rear tidy.
13 HDMI Input (HDMI1 and HDMI2)
Connect an HDMI cable from an imaging device with an
HDMI output to this input.
(The upper socket is 1 and the lower is 2).
14 Component Input (VIDEO1)
Connect a commercially available...

Page 9

English-7
English
13 OVERSCAN Button
Specifies the overscan ratio (Three
Levels) (Page 30 and 31): [FULL
(100%)], [98%], and [95%] or [93%].
14 ASPECT RATIO Button
Specifies the screen aspect ratio
suitable to the video input (Page 31).
•When SD Input is selected (Five
Modes): [AUTO], [4:3], [16:9],
[16:9 MODE], and [OFF].
•When HD Input is selected (Three
Modes): [16:9], [SIDE CUT], and
[16:9 MODE].
15 INFORMATION Button
Displays the signal information
currently input, and [MODEL] and
[SERIAL NUMBER] of...

Page 10

English-8
Operating the Remote Control
Basic Operations
Point the remote controller towards the receptor on the
monitor while operating.
Caution:Cautions on Remote Control Operations:
•The remote controller supplied with this monitor
cannot operate a TV or video.
•The remote controller is designed to function
up to three meters in a straight line from the
monitor; however, it may not function or the
monitor response may be slow depending on
the angle of the controller to the monitor. If this
happens,...
Start reading NEC Multisync Lcd24wmgx3 Users Manual

Related Manuals for NEC Multisync Lcd24wmgx3 Users Manual

All NEC manuals