NEC Mt1055 Lcd Projector Users Manual

E Ð 28
Customizing Basic/Custom Menu
The Basic/Custom menu can be customized to meet your requirements.
Selecting a menu item from the ÒBasic/Custom Menu EditÓ list, allows
you to custom tailor the menu items to your needs.
1. Select ÒBasic/Custom Menu EditÓ to display the ÒBasic/Custom
Menu EditÓ screen.
2. Use the s or t button to highlight your selection and press the
Enter button to place a check mark next to an option. This action
enables that feature.
Press the Enter button again to clear the check...

E Ð 29
3. In order for the changes to take effect, use the § or © button on
the remote control or the projector cabinet to highlight ÒOKÓ,
then press the Enter button. To cancel the changes, use the s or
t buttons to highlight ÒCancelÓ and press the ÒEnterÓ button.
To return to the factory default, select ÒResetÓ then press the ÒEn-
terÓ button.
The default Basic/Custom Menu items are:
Source Select (RGB1/2, Video, S-Video and PC Card Viewer), Pic-
ture, Volume, Image Options (Keystone, Color Temperature...

E Ð 30
Menu Tree
Advanced Menu
Source Select RGB2RGB1
Picture Video
Volume S-Video Brightness/Contrast/Color/Hue/Sharpness
Image Options PC Card Viewer
Projector OptionsVolume
High-Bright/Eco Tools
Help Keystone
Normal/Natural 1/Natural 2
Color Temperature
Lamp Mode
Gamma CorrectionAspect Ratio Normal/Zoom/Wide Zoom/Cinema
Advanced OptionsNoise Reduction Off/Low/Medium/High
Factory DefaultColor Matrix Select Color Matrix  HDTV/SDTV
Select Color Matrix Type  B-Y/R-Y,Cb/Cr,Pb/Pr
White Balance Brightness...

E Ð 31
Menu windows or dialog boxes typically have the following elements:
Title bar: Indicates the menu title.
Highlight: Indicates the selected menu or item.
Solid triangle: Indicates further choices are available. A highlighted triangle indicates the item is active.
Tab: Indicates a group of features in a dialog box. Selecting on any tab brings its page to the front.
Radio button: Use this round button to select an option in a dialog box.
Check box: Place a checkmark in the square box to turn the...

E Ð 32
The launcher is a tool bar including the following buttons:
Drag ............. Drags to move the tool bar. (for USB mouse operation only)
Prev ............. Returns to the previous slide or folder.
Next ............. Advances to the next slide or folder.
Play .............. Plays back automatically or manually depending on the set-
ting on PC Card Viewer Options of the menu. This allows you
to move on to the next slide when Manual Play is selected.
Stop ............. Stops Auto Play while you are...

E Ð 33
Image Options
Keystone
This feature corrects the keystone (trapezoidal) distortion to make
the top of the screen longer or shorter to be the same as the bottom.
Use the 
§ or © buttons on the slide bar to correct the keystone
(trapezoidal) distortion.
Keystone distortionNormal
NOTE: The maximum keystone angle that can be corrected is 40 degrees up-
ward and 20 degrees downward with the projector placed horizontally on the
ground plane.
Depending on the type of graphics being used, the picture may...

E Ð 34
Noise Reduction  (not available for RGB and PC Card Viewer)
You can select three levels video noise reduction.
NOTE: The lower the Noise Reduction level, the better the image quality by wayof higher video bandwidth.
Color Matrix  (available for component video signal only)
First select an appropriate color matrix to fit your component signal for
HDTV or SDTV. Then select an appropriate matrix type from B-Y/R-Y,
Cb/Cr or Pb/Pr.
White Balance
This allows you to adjust the white balance. Brightness...

E Ð 35
Factory Default
Changes all adjustments and setting to the factory preset for each
source individually except Lamp Hour Meter, Projector Usage, Lan-
guage and Communication Speed. (To reset the lamp usage time, see
Clear Lamp Hour Meter on page E-37.)
All Data ............... Reset all the adjustments and settings for all the signals
to the factory preset.
Current Signal ..... Resets the adjustments for the current signal to the fac-
tory preset levels.
The items that can be reset for the...

E Ð 36
Setup
Enables you to set operating options.
Press OK to save your changes for all the features of Page1, Page2,
Page3, Page 4, Page5 and Page6.
[Page1]
Orientation:
This reorients your image for your type of projection.
The options are: desktop front projection, ceiling rear projection,
desktop rear projection, and ceiling front projection.
Background:
Use this feature to display a blue/ black screen or logo when no
signal is available. The default background is blue. You can change
the logo...

E Ð 37
[Page4]
Auto Adjust (RGB Only):
When Auto Adjust is set to On, the projector automatically de-
termines the best resolution for the current RGB input signal to
project an image using NECs Advanced AccuBlend Intelligent Pixel
Blending Technology.
The image can be automatically adjusted for position and stability;
Horizontal Position, Vertical Position, Clock, Phase, and
Resolution.
On ................ Automatically adjusts image Horizontal Position, Vertical
Position, Clock, Phase and Resolution....