NEC Mt1045 Lcd Projector Users Manual
Here you can view all the pages of manual NEC Mt1045 Lcd Projector Users Manual. The NEC manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
EÐ31 Uninstalling the PC Card Viewer Software Even if you do now know the PC Card Viewer softwares file names or where they are stored, the PC Card Viewer software files can be easily removed from the system using the Install/Uninstall Applica- tions control panel in Windows 95. (Normally there is no need to perform this operation.) Uninstalling the software Use the procedure described below to uninstall the PC Card Viewer software files. 1. From the Start menu, select Settings then Control Panels. 2....
Page 32
EÐ32 This is the name of a card currently being standardized by the Japan Electronic Industry Association (JEIDA) and PCMCIA (Personal Computer Memory Card Interface Association) of the United States. PCMCIA 2.1 PC cards are divided into three types according to their thickness: Type I (3.3 mm), Type II (5.0 mm) and Type III (10.5 mm). A type of image format. The standard Windows Bit Map format used for MS-DOS/Windows-compatible comput- ers. A type of image format. JPEG is the abbreviation of Joint...
Page 33
EÐ33 4. MAINTENANCE This section describes the simple maintenance procedures you should follow to replace the lamp, clean the filter, and replace the batteries in the remote control. Replacing the Lamp After your lamp has been operating for 2000 hours (1500 hours : MT1045) or longer, the ÒStatusÓ light in the cabinet will go on and the message will appear. Even though the lamp may still be working, replace it at 2000 (1500 hours : MT1045) hours to maintain optimal projector performance. CAUTION ¥ DO NOT...
Page 34
EÐ34 2. Remove both old batteries and install new ones (AA). Ensure that you have the batteries polarity (+/Ð) aligned correctly. 3. Slip the cover back over the batteries until it snaps into place. Remote Control Battery Installation 1. Press firmly and slide the battery cover off. MENUOURCE AUTO ADJUSTUSB AC IN Cleaning or Replacing the Filters The air-filter sponge keeps the inside of the MultiSync MT840/ MT1040/MT1045 Projector free from dust or dirt and should be cleaned after every 100 hours of...
Page 35
EÐ35 5. TROUBLESHOOTING This section helps you resolve problems you may encounter while setting up or using the projector. OFF On continually Blinking very rapidly (On and off in a cycle of 1 sec.) Blinking rapidly (On and off in a cycle of 4 sec) Blinking slowly (On and off in a cycle of 8 sec.) Blinking very slowly (On and off in a cycle of 12 sec.) Status Light Messages Common Problems & Solutions Condition Status ¥ Normal ¥ The projector lamp has exceeded 2000 hours (1500 hours : MT1045) of...
Page 36
EÐ36 ¥ Is ÒPC Card ViewerÓ selected from the Source menu? ¥ Is the PC memory card seated in the PC CARD ACCESS slot completely? ¥ Are slide data stored in the PC card? ¥ Have the contents of the PC card been destroyed? ¥ While an image with over 10242768 dots is projected, several lines of information will be lost. Use the supplied software change the image to 10242768 dots in size. ¥ Areas of slides exceeding 10242768 (MT840: 8002600 dots) cannot be displayed. Use the PC Card Viewer software, etc., to...
Page 37
EÐ37 6. SPECIFICATIONS This section provides technical information about the MultiSync MT840/MT1040/MT1045 ProjectorÕs performance. Model Number MT840 / MT840G / MT1040 / MT1040G/ MT1045 / MT1045G Optical LCD Panel 1.3Ó p-Si TFT avtive-matrix, 8002600 dots (MT840) / 10242768 dots (MT1040/MT1045) 1.3Ó p-Si TFT avtive-matrix with Micro Lens Array (MT1045) Lens Manual zoom, manual focus MT840/MT1040 : F2.3 Ð 2.7 f=48.6 Ð 58.4 mm MT1045 : F1.8 Ð 2.2 f=49.3 Ð 59.3 mm Lamp MT840/MT1040 : 180W NSH lamp /...
Page 38
EÐ38 Cabinet Dimensions MENU ENTERCANCEL SELECT POWER STATUS ON /OFF SOURCE AUTO ADJUST AC IN PC CONTROLREMOTE CONTROL INPUT MOUSE OUTPUT USB S-VIDEO VIDEO AUDIO RGB INPUT 2 AUDIO RGB INPUT 1 L /MONO R 1.5 (0.06) 281 (11.06) 73.5 (2.89) 121 (4.76) 4 (0.16)6.6 (0.26)364 (14.33) Lens center 39.5 (1.56) Lens center Unit = mm (inch) MT840/MT1040
Page 39
EÐ39 MT1045 MENU ENTERCANCEL SELECT POWER STATUS ON /OFF SOURCE AUTO ADJUST AC IN PC CONTROLREMOTE CONTROL INPUT MOUSE OUTPUT USB S-VIDEO VIDEO AUDIO RGB INPUT 2 AUDIO RGB INPUT 1 L /MONO R PC-CARD 1.5(0.06) 281(11.06) 73.5 (2.89)121 (4.76) 4 (0.16)7.5 (0.3) 39.5 (1.56) 376 (14.9) Unit = mm (inch) Lens centerLens center
Page 40
EÐ40 51423 10 11 12 13 14 156 978 D-Sub Pin Assignments Mini D-Sub 15 Pin Connector Pin No. RGB Signal (Analog) YCbCr Signal 1 Red Cr 2 Green or Sync on Green Y 3 Blue Cb 4 Ground 5 Ground 6 Red Ground Cr Ground 7 Green Ground Y Ground 8 Blue Ground Cb Ground 9 No Connection 10 Sync Signal Ground 11 Ground 12 Bi-directional DATA (SDA)* 13 Horizontal Sync or Composite Sync 14 Vertical Sync 15 Data Clock* Signal Level Video signal : 0.7Vp-p (Analog) Sync signal : TTL level * RGB Input 1 only