NEC Mt1030+ Projector Users Manual

31
REMOTE
CONTROL
INPUT
AUDIO RGB   INPUT   2
AUDIO RGB   INPUT   1
AUDIO RGB MONITOR OUTPUTR L/MONO INPUT    AUDIO S–VIDEO
R L/MONO
INPUT    AUDIO VIDEO
REMOTE
CONTROL
INPUT
AUDIO RGB   INPUT   2
AUDIO RGB   INPUT   1
AUDIO RGB MONITOR OUTPUTR L/MONO INPUT    AUDIO S–VIDEO
R L/MONO
INPUT    AUDIO VIDEO
Connecting Your Computer to the
Mouse Output Port
The built-in remote mouse receiver enables you to operate your
computers mouse functions from the NEC MultiSync MT830+/
MT1030+/MT1035+ remote control. It...

32
This section describes how to select a computer or video source and how to adjust
the picture and sound.
General Controls Before you turn on your MultiSync MT830+/MT1030+/
MT1035+ LCD Projector,  ensure that the computer or video source is turned on
and that your lens cap is removed.
1.Turn On The LCD Projector The main power switch is on the front panel of
the MultiSync MT830+/MT1030+/MT1035+ LCD Projector. By turning this
switch on, the projector will go into its standby mode and the power light...

33
aaaaaaaaaaaaaa aaaaaaa
Using The Menus
1. Press the Menu button on the remote control or projector cabinet to display the Main Menu.
2. Press the Select button on the projector cabinet or (s) (t) buttons on your remote control to highlight the menu for the item you want
to adjust.
3. Press the Enter button on the projector cabinet or the Left Click button on the remote control to select a submenu or item.
4. Adjust the level or turn the selected item on or off by using the Mouse pad (+) or (Ð) buttons...

34
Menu Descriptions & Functions
Source Menu
OPERATION65
66 Enables you to select a video source such as a VCR, DVD player, laser disc player, computer
or document camera depending on what is connected to your inputs. Press the Select
button on the projector cabinet or (s) (t) buttons on your remote control to highlight the
menu for the item you want to adjust
Video
Selects what is connected to your Video input-VCR, laser disc player, DVD player, or
document camera.
S-Video
Selects what is connected to...

35
Image Adjustment
Menu
OPERATION67
68 Provides access to controls for your image and sound. Use the ÒSelectÓ button on the projector cabinet or (s)
(t) buttons on your remote control to highlight the menu for the item you want to adjust.
The volume, image mode, keystone, brightness, contrast, color, tint and sharpness controls are available for
Video or S-Video sources.
The volume, image mode, keystone, brightness, contrast, white balance and auto mode controls are available for
RGB 1 or RGB 2...

36OPERATION69
70 White Balance
...
Use the Mouse pad (+) or (-) buttons to adjust the white balance. Brightness for each color (RGB) is used to
adjust the black level of the screen; Contrast for each color (RGB) to adjust the white level of the screen.
Auto Mode
...
Use the Mouse pad (+) button to turn this feature on so Horizontal Position, Vertical Position, Picture
Adjustment, Fine Picture and Resolution are made automatically. Usually set to ON.
When the Auto mode is turned off with the Mouse pad (-)...

37
Provides access to Lamp Usage information and the Auto Start and Power Management fea-
tures. Use the ÒSelectÓ button on the projector cabinet or (s) (t) buttons on your remote
control to access a submenu. Then press the Mouse pad (+) or (Ð) to choose a specific option.
Lamp Usag e
This tells you how long the lamp has been in operation. It is recommended that you replace a
lamp after 2000 hours of service. After you install a new lamp, select this icon and press and
hold the ÒPower OnÓ button on the...

38
Settings Menu
Enables you to set preferences and other operating options. Use the ÒSelectÓ button on the projector cabinet or
(s) (t) buttons on your remote control to access the submenu you want.
Capture (with the optional viewer board installed only)
When Capture is selected, press Enter on the projector cabinet or Left Click button on the remote control to
display Execute and capture an image from a source that is currently being displayed. When capturing is
completed, Completed is displayed under...

39
Using the Viewer function
If you use the Viewer function on the LCD projector, you must first
install the optional MT Viewer board (VK-MT) in the LCD projector
and set up the exclusive software included with the VK-MT kit.
See the users manual included with the VK-MT for installing and
uninstalling the software.
Mounting the Optional MT Viewer Board
To install the Viewer board:
1. Set the LCD projector on end with the carrying handle up.
NOTE: Be sure to unplug the LCD projector before installing the...

40
Projecting Slides
Orientation of flash memory card insertion
The flash memory card has a front and a back side and the flash memory
card is designed to be inserted in only one orientation. The card is
designed so that it cannot be inserted in reverse, but trying to insert it
forcefully might break the pins inside the slot or ruin the flash memory
card slot. See the flash memory card manual for information about the
orientation of the flash memory card.
PCMC IA-ATA
Flash Memory Card
4. Select a file or...