NEC Mt1030+ Projector Users Manual

Part No.  78410751
Printed in Japan
NEC Multimedia Theatre
NEC Multimedia Theatre
LCD Projector UserÕs Manual
NEC Technologies, Inc.
1250 N. Arlington Heights Road, Suite 500
Itasca, Illinois 60143-1248
MultiSync
¨
MT830+ª/MT1030+ª/MT1035+ª
NEC Technologies 

2
Precautions
Please read this manual carefully before using your NEC MultiSync
M T830+/MT1030+/MT1035+ LCD Projector and keep the manual
handy for future reference.
Your serial number is located under the name plate label on the right side of
your MultiSync MT830+/MT1030+/MT1035+.  Record it here:
IMPORTANT INFORMATION
RF Interference
WARNING
The Federal Communications Commission does not allow any
modifications or changes to the unit EXCEPT those specified by
NEC Technologies in this manual. Failure to...

3
Important Safeguards
These safety instructions are to ensure the long life of your LCD projector and
to prevent fire and shock. Please read them carefully and heed all warnings.
Installation
1. For best results, use your LCD projector in a darkened room.
2. Place the projector on a flat, level surface in a dry area away from dust and
moisture.
3. Do not place your LCD projector in direct sunlight, near heaters or heat
radiating appliances.
4. Exposure to direct sunlight, smoke or steam can harm...

4
Ce symbole a pour but de prŽvenir lÕutilisateur de la
prŽsence dÕune tension dangereuse, non isolŽe se
trouvant ˆ lÕintŽrieur de lÕappareil. Elle est dÕune
intensitŽ suffisante pour constituer un risque

lÕintŽrieur de cet appareil.
Ce symbole a pour but de prŽvenir lÕutilisateur de la
prŽsence dÕimportantes instructions concernant
lÕentretien et le fonctionnement de cet appareil. Par


Importantes prŽcautions de sŽcuritŽ
Les points suivants sont des prŽcautions de sŽcuritŽ importantes destinŽes ˆ...

5
4. La fumŽe, la vapeur et lÕexposition aux rayons directs du soleil risquent de
dŽtŽriorer sŽrieusement les composantes internes.
5. Eviter des manipulations brusques lors du dŽplacement du projecteur ˆ Žcran
ˆ cristaux liquides (LCD), car un choc violent pourrait endommager les
composantes internes.
6. Ne pas deposer dÕobjets lourds sur le dessus du projecteur ˆ Žcran ˆ cristaux
liquides (LCD).
7. Lors de lÕinstallation du projecteur ˆ Žcran ˆ cristaux liquides (LCD) au
plafond, respecter les...

6
NEC MultiSync¨ LCD Projector
Products
NEC Technologies, Inc. (hereafter NECTECH) warrants this product to be free
from defects in material and workmanship under the following terms.
HOW LONG IS THE WARRANTY?
Parts and labor are warranted for (2) two years from the date of the first customer
purchase. The lamp is warranted for 2000 hours of operating time or six months,
whichever comes first.
WHO IS PROTECTED?
This warranty may be enforced only by the first purchaser.
WHAT IS COVERED AND WHAT IS NOT...

7
1. Introduction
Introduction To The MultiSync MT830+/MT1030+/MT1035+ LCD Projector .............. 13
How Do You Get Started? ............................................................................................... 15
WhatÕs In The Box? ........................................................................................................ 15
Getting To Know Your MultiSync MT830+/MT1030+/MT1035+ LCD Projector ......... 17
Front / Rear Features...

8
This section introduces you to your new MultiSync MT830+ (SVGA)/
MT1030+ and MT1035+ (XGA) LCD Projector, provides a list of
materials that comes with your projector and describes the features and
controls.
Congratulations On Your Purchase Of The MultiSync
MT830+/MT1030+/MT1035+ LCD Projector
The MultiSync MT830+/MT1030+/MT1035+ is one of the very
best LCD projectors available today. The multiple LCD panels en-
able you to project precise images up to 300 inches (MT830+/
MT1030+) / 320 inches (MT1035+)...

9
How Do You Get Started?
The fastest way to get started is to take your time and do everything right the first
time. Take a few minutes now to watch the introductory video and review the
manual. This may save you hours later on. At the beginning of each section of the
manual youll find an overview. If the section doesnt apply, you can skip it.
WhatÕs In The Box?
Make sure your box contains everything listed. If any pieces are missing, contact
your dealer. Please save the original box and packing...

10
PC CONTROL MOUSE OUTPUTREMOTE
CONTROL
INPUT
AUDIO RGB   INPUT   2
AUDIO RGB   INPUT   1
AUDIO RGB MONITOR OUTPUTR L/MONO INPUT    AUDIO S–VIDEO
R L/MONO
INPUT    AUDIO VIDEO
AC IN
Built-In Speaker
(2W)
Getting To Know Your MultiSync MT830+/MT1030+/MT1035+
LCD Projector
AC Input
Plug the female end of the supplied
power cable here, and the male end
into a properly grounded outlet.Remote Sensor
Filter Cover Rear Feet
Slot for Kensington
MicroSaver Security System
Main Power Switch
Right Side Features...