NEC Mcu 5000a Multipoint Control Unit Equipment Manual
Here you can view all the pages of manual NEC Mcu 5000a Multipoint Control Unit Equipment Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 581
NECA 340-414-300 Revision 2.0 Page 1 of 2 MCU 5000A Multipoint Control Unit COP-227 CDTI Multipoint Teleconference Indication EXPLANATION Indication of acquisition/release of data taken. (RCON mode) RELATED COMMANDNone FORMAT CDTI __g__r__mmm__sss__xxx EXPLANATION OF PARAMETERS g= A or B Indicates the teleconference group name. r= Conference room number of terminal which is acquired or released data taken mmm= Mode LSD/HSD sss= Data Speed xxx= ON or OFF
Page 582
Page 2 of 2 NECA 340-414-300 Revision 2.0 COP-227 MCU 5000A Multipoint Control Unit This page is for your notes.
Page 583
NECA 340-414-300 Revision 2.0 Page 1 of 2 MCU 5000A Multipoint Control Unit COP-228 NALT Multipoint Teleconference Indication EXPLANATION Display ringing status. (After the call requested, indicate the originator received ringing status report at termination point.) RELATED COMMANDNone FORMAT NALT __n EXPLANATION OF PARAMETERS n= Logical line number
Page 584
Page 2 of 2 NECA 340-414-300 Revision 2.0 COP-228 MCU 5000A Multipoint Control Unit This page is for your notes.
Page 585
NECA 340-414-300 Revision 2.0 Page 1 of 2 MCU 5000A Multipoint Control Unit COP-229 NONL Multipoint Teleconference Indication EXPLANATION Display communication status. (After requested call and message, report was received, indicate it is available to communicate.) RELATED COMMANDNone FORMAT NONL __n__s__c EXPLANATION OF PARAMETERS n= Logical line number s= B, 2B, H0, 2H0 Line speed c= R: 56k, N: 64k Terminal ability
Page 586
Page 2 of 2 NECA 340-414-300 Revision 2.0 COP-229 MCU 5000A Multipoint Control Unit This page is for your notes.
Page 587
NECA 340-414-300 Revision 2.0 Page 1 of 2 MCU 5000A Multipoint Control Unit COP-230 NDCI Multipoint Teleconference Indication EXPLANATION Report of disconnect. (Report the line was disconnected) RELATED COMMANDNone FORMAT NDCI __n__i__s__k__t__c__b__a EXPLANATION OF PARAMETERS n= Logical line number i= c: Transmitting call, I: Receiving call Display receiving message s= B, 2B, H0, 2H0 Line speed k= R: 56k, N: 64k Terminal attribute t= hh:mm:ss (time of B1) Transmission time c= #001 ~ #999 - 00 ~ 10 (c...
Page 588
Page 2 of 2 NECA 340-414-300 Revision 2.0 COP-230 MCU 5000A Multipoint Control Unit This page is for your notes.
Page 589
NECA 340-414-300 Revision 2.0 Page 1 of 2 MCU 5000A Multipoint Control Unit COP-231 NINC Multipoint Teleconference Indication EXPLANATION Report receiving message (Report line in ready status has a reception of the message.) RELATED COMMANDNone FORMAT NINC __n__o__s__c__a EXPLANATION OF PARAMETERS n= Logical line number o= A: Auto, M: Manual Action s= B, 2B, H0, 2H0 Line speed c= R: 56k, N: 64k Terminal attribute a= Terminating address (display only when it was already set up)
Page 590
Page 2 of 2 NECA 340-414-300 Revision 2.0 COP-231 MCU 5000A Multipoint Control Unit This page is for your notes.