NEC M302ws Projector Users Manual

120
6. Installation and Connections
WARNING
*	 Installing	your	projector	 on	the	 ceiling	 must	be	done	 by	a	qualified	 technician. 	Contact	 your	NEC	 dealer	 for	more	
information.
*	 Do	not	attempt	to	install	the	projector	yourself.
•	 Only	 use	your	 projector	 on	a	solid,	 level	surface. 	If	 the	 projector	 falls	to	the	 ground,	 you	can	 be	injured	 and	the	
projector	severely	damaged.
•	 Do	 not	use	 the	projector	 where	temperatures	 vary	greatly. 	The	 projector	 must	be	used	 at	temperatures...

121
6. Installation and Connections
HDMI 2 IN
HDMI 1 IN
COMPUTER IN
USB-B
AUDIO IN
Computer cable (VGA) (supplied)To mini D-Sub 15-pin connector on	the	projector. 	It	is	recommend-
ed that you use a commercially 
available distribution amplifier if 
connecting a signal cable longer 
than the cable supplied.
NOTE: 	For 	Mac, 	use 	a 	commercially	
available	 pin	adapter	 (not	sup-
plied) 	to 	connect 	to 	your 	Mac’s	
video	port.
A commercially available USB cable 
(compatible with USB 2.0...

122
6. Installation and Connections
•	 Select	the	source	name	for	its	appropriate	input	connector	after	turning	on	the	projector.
Input	connectorSOURCE	button	on	the	projector	
cabinetButton	on	the	remote	control
COMPUTER	IN	COMPUTER(COMP1)
HDMI	1	IN	HDMI1HDMI1
HDMI	2	IN	HDMI2HDMI2
USB-B
	USB-B(USB-B)
NOTE:	The	projector	is	not	compatible	with	video	decoded	outputs	of	the	NEC	ISS-6020	switcher.
NOTE:	An	image	may	not	be	displayed	correctly	when	a	Video	source	is	played	back	via	a	commercially	available...

123
6. Installation and Connections
Connecting an External Monitor
You	can	connect	 a	separate,	 external	monitor	to	your	 projector	 to	simultaneously	 view	on	a	monitor	 the	computer	
analog	image	you’re	projecting.
NOTE:
•	 Daisy	chain	connection	is	not	possible.
•	 When	audio	equipment	is	connected,	the	projector	speaker	is	disabled.
Monitor	out	and	sleep	mode:
•	 The	MONITOR	OUT	(COMP.)	connector	will	not	work	when	[NORMAL]	is	selected	for	[STANDBY	MODE].
	 The	MONITOR	OUT	(COMP.)	connector	will...

124
6. Installation and Connections
Connecting Your DVD Player or Other AV Equipment
Connecting	Video	Input
•	 Select	the	source	name	for	its	appropriate	input	connector	after	turning	on	the	projector.
Input	connectorSOURCE	button	on	the	projector	
cabinetButton	on	the	remote	control
VIDEO	IN	VIDEO(VIDEO)
NOTE:	The	AUDIO	IN	L	and	R	jacks	(RCA)	are	shared	between	the	Video	inputs.
NOTE:	Refer	to	your	VCR	owner’s	manual	for	more	information	about	your	equipment’s	video	output	requirements.
NOTE:	 An	image...

125
6. Installation and Connections
Connecting Component Input
•	 Select	the	source	name	for	its	appropriate	input	connector	after	turning	on	the	projector.
Input	connectorSOURCE	button	on	the	projector	
cabinetButton	on	the	remote	control
COMPUTER	IN	COMPUTER(COMP1)
NOTE:	Refer	to	your	DVD	player’s	owner’s	manual	for	more	information	about	your	DVD	player’s	video	output	requirements.
COMPUTER IN
AUDIO IN
Audio cable (not supplied)
15-pin - to - RCA (fe-
male) × 3 cable adapter 
(ADP-CV1E)
Stereo mini...

126
6. Installation and Connections
HDMI 2 IN
HDMI 1 IN
Connecting HDMI Input
You	
can	connect	 the	HDMI	 output	 of	your	 DVD	 player,	 hard	disk	player,	 Blu-ray	 player,	or	notebook	 type	PC	to	the	
HDMI	IN	connector	of	your	projector.
NOTE:	The	HDMI	IN	connector	supports	Plug	&	Play	(DDC2B).
Audio cable (not supplied)
HDMI	cable	(not	supplied)Use	High	Speed	HDMI® Cable.
Input	connectorSOURCE	button	on	the	projector	
cabinetButton	on	the	remote	control
HDMI	1	IN	HDMI1HDMI1
HDMI	2	IN	HDMI2HDMI2
TIP:...

127
6. Installation and Connections
Connecting to a Wired LAN
The	projector	comes	standard	with	a	LAN	port	(RJ-45)	which	provides	a	LAN	connection	using	a	LAN	cable.	
To	use	 a	LAN	 connection,	 you	are	required	 to	set	 the	 LAN	 on	the	 projector	 menu.		Select	 [SETUP]	→	[WIRED	 LAN].	
(→	page	108).
Example of LAN connection
Example	of	wired	LAN	connectionServer
Hub
LAN cable (not supplied)
NOTE:	 Use	a	Category	 5	or	 higher	
LAN	cable. 

128
6. Installation and Connections
Connecting to a Wireless LAN (Optional: NP02LM series)
The	USB	 Wireless	 LAN	Unit	also	 provides	 a	wireless	 LAN	connection. 	To	 use	 a	wireless	 LAN	connection,	 you	are	
required	to	assign	an	IP	address	to	the	projector.
Important:
•	 If	 you	use	 the	projector	 with	the	USB	 Wireless	 LAN	Unit	in	the	 area	 where	 the	use	 of	wireless	 LAN	equipment	 is	
prohibited,	remove	the	USB	 Wireless	LAN	Unit	from	the	projector.
•	 Buy	the	appropriate	USB	 Wireless	LAN...

129
6. Installation and Connections
Prepare	a	Phillips	screw	driver	beforehand.
1.	 Press	the	POWER	 button	to	turn	 off	the	 projector	 and	set	it	
into	standby	condition, 	and	disconnect	the	power	cord.
2.	 Remove	the	USB	(LAN)	port	cover.
 Loosen the screw securing the port cover.
	 •	 The	screw	is	not	removable. 	
3.	 Slowly	insert	the	USB	 Wireless	 LAN	Unit	into	the	USB	 (LAN)	
port.
 Remove the cap from the USB Wireless LAN Unit, and then insert 
it with the surface (side of indicator) facing...