NEC M302ws Projector Users Manual
Here you can view all the pages of manual NEC M302ws Projector Users Manual. The NEC manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 1
Projector M402W/M362W/M322W/ M402X/M362X/M322X/M282X/ M352WS/M302WS/M332XS User’s Manual The M302WS, M402W, M362W, and M362X are not distributed in North America. Model No. NP-M402W, NP-M362W, NP-M322W, NP-M402X, NP-M362X, NP- M322X, NP-M282X, NP-M352WS, NP-M302WS, NP-M332XS
Page 2
Ver. 2/01/14 • DLP is a trademark of Texas Instruments. • Apple, Mac, Mac OS, and MacBook are trademarks of Apple Inc. registered in the U.S. and other countries. • Microsoft, Windows, Windows Vista, Internet Explorer, .NET Framework and PowerPoint are either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. • Intel and Intel Core are trademarks of Intel Corporation in the U.S. and/or other countries. • PowerPC is a registered trademark...
Page 3
i Important Information Safety Cautions Precautions Please read this manual carefully before using your NEC projector and keep the manual handy for future reference. CAUTION To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible. CAUTION TO PREVENT SHOCK, DO NOT OPEN THE CABINET. THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE...
Page 4
ii Important Information WARNING TO CALIFORNIA RESIDENTS: Handling the cables supplied with this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. WASH HANDS AFTER HANDLING. RF Interference (for USA only) WARNING The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by NEC Display Solutions of America, Inc. in this manual. Failure to...
Page 5
iii Important Information WARNING • Do not use any other object than the projector’s sliding lens cover to cover the lens while the projector is on. Doing so can cause the object to get extremely hot, and possibly resulting in a fire or damage due to the heat emitted from the light output. • Do not cover the lens with the lens cap or equivalent while the projector is on. Doing so can lead to melting of the cap due to the heat emitted from the light output. • Do not place...
Page 6
iv Important Information • Do not place any objects, which are easily affected by heat, in front of a projector exhaust vent. Doing so could lead to the object melting or getting your hands burned from the heat that is emitted from the ex- haust. • Do not splash water over the projector. Doing so can cause electrical shock or fire. If the projector gets wet, turn off the projector, unplug the power cord and have the projector serviced by a qualified service personnel. • Handle...
Page 7
v Important Information Note for US Residents The lamp in this product contains mercury. Please dispose according to Local, State or Federal Laws. Lamp Replacement • Use the specified lamp for safety and performance. • To replace the lamp, follow all instructions provided on page 132. • Be sure to replace the lamp when the message [THE LAMP HAS REACHED THE END OF ITS USABLE LIFE. PLEASE REPLACE THE LAMP.] appears. If you continue to use the lamp after the lamp has reached the end of...
Page 8
vi Important Information Power management function The projector has power management functions. To reduce power consumption, the power management functions (1 and 2) are factory preset as shown below. To control the projector from an external device via a LAN or serial cable connection, use the on-screen menu to change the settings for 1 and 2. 1. STANDBY MODE (Factory preset: NORMAL) To control the projector from an external device, select [NETWORK STANDBY] for [STANDBY MODE]....
Page 9
vii Table of Contents Important Information ........................................................................\ ....................i 1. Introduction ........................................................................\ ...................................1 ❶ What’s in the Box? ........................................................................\ ..................................1 ❷ Introduction to the Projector ........................................................................\...
Page 10
viii Table of Contents ❹ Changing Eco Mode/Checking Energy-Saving Effect .................................................33 Using Eco Mode [ECO MODE] ........................................................................\ .......33 Checking Energy-Saving Effect [CARBON METER] ..............................................34 ❺ Preventing the Unauthorized Use of the Projector [SECURITY] .......................................3 5 ❻ Using the Computer Cable (VGA) to Operate the Projector (Virtual...