NEC Lt150 Micro-portable Projector Users Manual

EÐ28
Press the Source button on the remote control or the projec-
tor cabinet to select ÒVideoÓ (VCR, document camera, or la-
ser disc player), S-VideoÓ, ÒRGBÓ (computer or DVD with
component output) or ÒPC Card ViewerÓ (slides on a
CompactFlash card) to display the image.
Or press the ÒMenuÓ button on the remote control or the cabi-
net and use the menu to select your video source: ÒVideoÓ,
ÒS-VideoÓ, ÒRGBÓ or ÒPC Card ViewerÓ.
NOTE: If no input signal is available, the projector will display a blue...

EÐ29
Adjust the Tilt Foot
1) Lift the front edge of the projector.
2) Press the Tilt button on the top of the projector to extend the
adjustable tilt foot (maximum height).
MENUENTERCANCEL
SELECTAUTO
ADJUST
PC  CARD ACCESS
STATUSPOWER
ON / STAND BY
SOURCE
1
1
2
3) Press and hold the Tilt button.
4) Lower the front of the projector to the desired height and re-
lease the button to lock the Adjustable tilt foot.
There is approximately 5 degrees of up and down adjustment
for the front of the projector. The...

EÐ30
Basic Operation
SOURCEAUTO
ADJ.
Selecting the computer or video source
Source display
SOURCEAUTO
ADJ.
Optimizing RGB image automatically
Press the Auto Adjust button to optimize an RGB image automati-
cally.
Press the Auto Adjust button to fine-tune the computer image or to
remove any vertical banding that might appear and to reduce video
noise, dot interference or cross talk (this is evident when part of your
image appears to be shimmering). This function adjusts the clock
frequencies that...

EÐ31
Using Pointer
You can use one of eight pointers to draw your audiences attention to
the portion of a projected image you want.
POINTER
SELECT
Vol.
Vol.
Press the Pointer button to
display the pointer.
Use the Select button to move
the pointer.
Enlarging and Moving a Picture
You can enlarge the area you want up to 400 percent.
To do so:
1. Press the Pointer button to display the pointer.
SELECT
Vol.
Vol.
MAGNIFY
MAGNIFY
KEYSTONE
FREEZE
POINTER
2. Move the pointer to the area you want to enlarge.
3....

EÐ32
Using the Menus
NOTE: The on-screen menu may not be displayed correctly while interlaced
motion video image is projected.
1. Press the Menu button on the remote control or projector cabi-
net to display the Advanced Menu or Basic/Custom Menu.
NOTE: When using a USB mouse, click the mouse button to display the
menu. For other operations, do the same way as you use your PC mouse.
2. Press the st buttons on the supplied card remote control or the
projector cabinet, or the optional presentation remote...

EÐ33
Using a USB Mouse
Using a USB mouse gives you a smooth operation. A commercially
available USB mouse is required.
NOTE:There may be some brands of USB mouse that the projector does not
support.
Operate the Menus using the USB mouse
Mouse Cursor
When connecting a USB mouse to the projector, you get a mouse
cursor on the screen.
Unless you use your USB mouse within 10 seconds, the mouse
cursor disappears.
Menu Display
Clicking with a mouse button displays the menu.
Clicking 
 displays the pull-down...

EÐ34
Menu Tree
Advanced Menu
Source Select RGB
Picture Video
Volume S-Video Brightness/Contrast/Color/Hue/Sharpness
Image Options PC Card Viewer
Projector Options Volume
Tools
Help Keystone Normal/Natural 1/Natural 2
Color Temperature
Gamma Correct Aspect Ratio Normal/Zoom/Wide Zoom/Cinema
Advanced Options Noise Reduction Off/Low/Medium/High
Factory Default Color Matrix Select Color Matrix  HDTV/SDTV
Select Color Matrix Type  B-Y/R-Y,Cb/Cr,Pb/Pr
White Balance Brightness R/G/B, Contrast R/G/B...

EÐ35
Menu Elements
Title barTa b
Highlight
Solid triangle
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Menu windows or dialog boxes typically have the following elements:
Title bar:Indicates the menu title.
Highlight:Indicates the selected menu or item.
Solid triangle:Indicates further choices are available. A highlighted triangle indicates the item is active.
Tab:Indicates a group of features in a dialog box. Selecting on any tab brings its page to the front.
Radio button:Use this...

EÐ36
Source Select
Picture (not available for PC Card Viewer)
Menu Descriptions & Functions
Enables you to select a video source such as a VCR, DVD player, laser
disc player, computer or document camera depending on what is con-
nected to your inputs.
Press the Select button on the projector cabinet or st buttons on your
remote control to highlight the menu for the item you want to adjust.
RGB
Selects the computer connected to your RGB or component signal.
NOTE: An optional component cable (Component V...

EÐ37
Keystone distor tionNormal
Aspect Ratio allows you to select the best Aspect mode to display
your source image.
When 4:3 is selected from the source (i.e. DVD player), the following selec-
tions will display:
Normal Zoom Wide Zoom Cinema
Standard
4:3 AspectAll 4 sides stretched
Left & Right
stretchedLeft and right
stretched
When 16:9 is selected from the source (i.e. DVD player), the following se-
lections will display:
Normal Zoom Wide Zoom Cinema
16:9 image displayed
 in 4:3 modeAll 4 sides...