NEC Lt150 Micro-portable Projector Users Manual

EÐ18
KEYSTONE
FREEZE
PIC-
MUTE
HELPPOINTERPC CARD
VIDEO S-
VIDEOAUTO ADJ.
RGB 1
MENU LASER
R-CLICK /CANCEL
L-CLICK/ENTER
RGB 2 PJ
ON OFF
MAGNIFY
VOL.
SLIDE
FOLDER
SLIDE
LIST
KEYSTONE
FREEZE
PIC-
MUTE
HELPPOINTERPC CARD
VIDEO S-
VIDEOAUTO ADJ.
RGB 1
MENU LASER
R-CLICK /CANCEL
L-CLICK/ENTER
RGB 2 PJ
ON OFF
MAGNIFY
VOL.
SLIDE
FOLDER
SLIDE
LIST
Switching operation mode between mouse and projector
The three shaded buttons shown on the drawing work as a computer mouse in the Computer mode.
In the Computer mode...

EÐ19
2. INSTALLATION
This section describes how to set up your MultiSync LT150/LT85 projector and how to connect video and audio sources.
Setting up Your Projector
Your MultiSync LT150/LT85 Projector is simple to set up and use. But before you get started, you must first:
1. Determine the image size.
2. Set up a screen or select a non-glossy white wall onto which you can project your image.
Ensure that the power cable and any other cables connecting to video sources are disconnected before moving the...

EÐ20WARNING
* Do not attempt to install the projector yourself.
¥ Only use your projector on a solid, level surface. If the projec-
tor falls to the ground, you can be injured and the projector
severely damaged.
¥ Do not use the projector where temperatures vary greatly. The
projector must be used at temperatures between 32ûF (0ûC)
and 95ûF (35ûC).
¥ Do not expose the projector to moisture, dust, or smoke. This
will harm the screen image.
¥ Ensure that you have adequate ventilation around your pro-...

EÐ21
VIDEO S-VIDEO RGB AUDIO
PC CONTROL
Wiring Diagram
Optional Component V cable
To video, S-video, and audio
inputs on the projector.
RGB Signal cable (supplied)
To mini D-Sub 15-pin connector on the
projector. It is recommended that you use a
commercially available distribution amplifier if
connecting a signal cable longer than the
supplied cable.
IBM VGA or Compatibles
(Desktop type or notebook type)Macintosh(Desktop type or notebook type)
Document Camera
DVD Player (with component output) VCR, DVD...

EÐ22
A
C
 
 
I
NPC CARD
USB VIDEO S-VIDEO
RGB AUDIO
PC CONTROL
MENUENTERCANCELS
E
L
E
C
TA
U
T
O
A
D
J
U
S
T
P
C 
C
A
R
D 
A
C
C
E
S
S
S
T
A
T
U
S
P
O
W
E
RO
N/
S
T
A
N
D
 
B
YS
O
U
R
C
E
VIDEO S-VIDEO
RGB AUDIO
PC CONTROL
RGB INPUT
AUDIO
Connecting Your PC
IBM VGA or Compatibles
(Notebook type)RGB signal cable (supplied)
To mini D-Sub 15-pin connector on the projector. It is recom-
mended that you use a commercially available distribution ampli-
fier if connecting a signal cable longer than the supplied...

EÐ23
A
C
  INPC CARD
USB VIDEO S-VIDEO
RGB AUDIO
PC CONTROL
MENUENTERCANCELSE
LEC
TAUTO
AD
JUST
PC  CARD ACCESS
S
TATUS
PO
WERON /
STAN
D BYSO
UR
CE
VIDEO S-VIDEO
RGB AUDIO
PC CONTROL
RGB INPUT
AUDIO
1O
ND
I
P
23456
To connect to a Macintosh, simply:
1. Turn off the power to your projector and your Macintosh com-
puter.
2. Use the supplied signal cable to connect your Macintosh com-
puter to the projector.
3. Turn on the projector and the Macintosh computer.
Connecting Your Macintosh Computer
Macintosh...

EÐ24
AC
  INPC CARD
USB VIDEO S-VIDEO
RGB AUDIO
PC CONTROL
MENUENTERCANCELS
E
L
E
C
TAUTO
ADJU
ST
PC  CAR
D ACCESS
STATUS
POWERON/
STAND BYSOURCE
VIDEO S-VIDEO
RGB AUDIO
PC CONTROL
RGB INPUTY     Cb     Cr R     L
R     L
You can connect your projector to a DVD player with component outputs or Video output. To do so, simply:
1. Turn off the power to your projector and DVD player.
2. If your DVD player has the component video (Y,Cb,Cr) output, use the optional 15-pin-to-RCA23 cable to connect your DVD...

EÐ25
A
C
  INPC CARD
USB VIDEO S-VIDEO
RGB AUD
IO
PC CONT
ROL
MENUENTERCANCELS
E
L
E
C
TA
UT
O
A
DJ
U
ST
PC  C
AR
D AC
C
ESS
STA
TU
S
P
OWE
RO
N/
ST
AN
D BYSOU
R
CE
VIDEO S-VIDEO
RGB AUDIO
PC CONTROL
VIDEO
S-VIDEO
R       L
R       L
VIDEO
Use common RCA cables (not provided) to connect your VCR, laser disc player or document camera to your projector.
To make these connections, simply:
1. Turn off the power to the projector and VCR, laser disc player or document camera.
2. Connect one end of your RCA...

EÐ26 About Startup screen 
(Menu Language Select screen)
When you first turn on the projector, you will get the Startup screen.
This screen gives you the opportunity to select one of the seven menu
languages: English, German, French, Itilan, Spanish,Swedish and
Japanese.
To select a menu language, follow these steps:
1. Use the Select s or t button to select one of the seven languages
for the menu.
2. Press the Enter button to execute the selection.
3. The Basic/Custom menu will be displayed in the...

EÐ27
RGB
STATUS
POWERON /
STAND BYSOURCE
3.OPERATION
AC  INPC CARD
USB VIDEO S-VIDEO
RGB
AUDIO
PC CONTROL
MENU
ENTERCANCELSELECT
A
U
T
O
A
D
J
U
S
T
P
C C
A
R
D A
C
C
E
S
S
S
T
A
T
U
S
P
O
W
E
RO
N/
S
T
A
N
D
 B
YS
O
U
R
C
E
1Connect the supplied power cable to the projector.
2Turn on and off the Projector
3
Connecting the Power Cable and Turn on the Projector
POWER ON/STAND BY button
Indicator
To turn on the projector:
Only after you press the ÒPOWERÓ button on the projector
cabinet or the remote...