NEC Lt100 Projector Users Manual

Enables you to select a video source such as a VCR, DVD player, laser disk player, compu-
ter or document camera depending on what is connected to your inputs. Press the Select
button on the projector cabinet or (s) (t) buttons on your remote control to highlight the
menu for the item you want to adjust.
Video
Selects device connected to your video input (VCR, document camera, laser disk player or
DVD player).
S-Video
Selects device connected to S-Video input (Laser disk player, S-VHS VCR or DVD...

Image Adjustment Menu
61
OPERATION62 Provides access to controls for your image and sound. Use the ÒSelectÓ button on the projector cabinet or (s)
(t) buttons on your remote control to highlight the menu for the item you want to adjust.
The volume, image mode, brightness, contrast, color, tint, sharpness and white balance controls are available for
Video or S-Video sources.
The volume, image mode, brightness, contrast, horizontal position, vertical position, white balance, alignment
and auto picture...

63
OPERATION64
Brightness
Use the ÒAdjustÓ (+) or (Ð) buttons to adjust the brightness.
Contrast
Use the ÒAdjustÓ (+) or (Ð) buttons to adjust the contrast.
Color*
 Use the ÒAdjustÓ (+) or (Ð) buttons to adjust the color.
Tint*
Use the ÒAdjustÓ (+) or (Ð) buttons to adjust the tint.
Sharpness*
Use the ÒAdjustÓ (+) or (Ð) buttons to adjust the sharpness.
White Balance
Use the Mouse pad (+) or (Ð) buttons to adjust the white balance.
For Video/RGB ... Brightness for each color (RGB) is used to adjust the...

Provides access to Lamp Usage information, the Auto Start, Power Management and On-
screen Mute features. Use the ÒSelectÓ button on the projector cabinet or (s) (t) buttons on
your remote control to access a submenu. Then press ÒAdjustÓ (+) or (Ð) to choose a specific
option.
Lamp Usage
This tells you how long the lamp has been in operation. It is recommended that you replace a
lamp after 1000 hours of service. After you install a new lamp, select this icon and press and
hold the ÒPower OnÓ button on...

Settings Menu
Enables you to set preferences and other operating options. Use the ÒSelectÓ button on the projector cabinet or
(s) (t) buttons on your remote control to access the submenu you want.
Custom Memory
 This enables you to save your current settings for an RGB source in one of five memories, Custom 1-5.
To change the STANDARD settings, proceed as follows:
1. Connect your computer to the MultSync LT100.
2. Select the STANDARD in RGB source.
3. Adjust the horizontal/vertical position, Picture, and...

Using the Viewer function
If you use the Viewer function on the projector, you must first install
the optional LT Viewer board (VK-LT) in the projector and set up the
exclusive software included with the VK-LT kit.
See the users manual included with the VK-LT for installing and
uninstalling the software.
Mounting the Optional LT Viewer Board
To install the Viewer board:
1. Switch off the main power and unplug the power cord. Turn the
projector so that the bottom is up.
2. Remove the screw from the board...

Projecting Slides
Orientation of flash memory card insertion
The flash memory card has a front and a back side and the flash
memory card is designed to be inserted in only one orientation. The
card is designed so that it cannot be inserted in reverse. Trying to
force the card into slot may result in damage to the card and the
PCMCIA card slot. See the flash memory card manual for informa-
tion about the orientation of the flash memory card.
PCMC IA-ATA
Flash Memory Card
4. Select a file or a slide.
Use...

Selecting a File from a List of Files
* The Viewer feature allows you to store one or more presentation
materials in a single flash memory card. Each material is referred to
as a file or slide.
To select a file from a list of files
1. Press the Menu button on the remote control or cabinet to select
PC Card.
H G
EFD C
AB
presentation
presentation presentationpresentation
presentation
presentation presentationpresentation
Table Cursor
8 7
564 3
12
File
File FileFile
File
File FileFileMulti Cursor
2. Use...

Switching Slides
To switch slides, press SLIDE + or SLIDE Ð button. This will
cancel the Auto Play mode. To set the Auto Play mode, press the Menu
button to select ÒStartÓ from the Source menu and press the Enter
button on the cabinet or the Left Click button on the remote control.
This is valid only when the Auto Play mode is selected. See more
information about ÒAuto Play modeÓ for the Help file included with the
Viewer board.
* SLIDEÐ returns to the previous slide.
SLIDE+ advances to the next slide....

This section describes the simple maintenance procedures you should follow
to replace the lamp and replace the batteries in the remote control.
Replacing The Lamp
After your lamp has been operating for 1000 hours or longer, the Òsta-
tusÓ light in the cabinet will turn red. Even though the lamp may still be
working, replace it at 1000 hours to maintain optimal projector perform-
ance.
CAUTION
¥ DO NOT TOUCH THE LAMP immediately after it has been used. It will
be extremely hot. Allow at least one hour for...