NEC I-Series Digital Single Line, Analog Single Line Quick Reference Guide

Digital Single Line (DSL)
Analog Single Line (SLT)
Quick Reference Guide
92600DSL05
April 2001
Printed in U.S.A. (2562)
92600DSL05-1.QXD  3/12/01  4:44 PM  Page 12 

O
920-108H
Using Your Digital Single Line Telep
These Volume Controls
are for speaker and handset.
Press then to automatically
redial the last number you called.
Lift the Handsetto place
and answer calls.
While on a call, press  then 
to automatically save the number you
just dialed.
Press then  to automatically
redial the saved number later on.
Use the Dial Pa
outside calls andDue to the flexibility built into the system,
your Dialing Codesand Feature
Capacitiesmay differ from those in this
guide. Check...

DEF
MNO
WXY ABC
JKL GHI
TUV
VOL HOLD
PARK
FTR SAVE REDIALPRS
OPER3
6
9
#
2
5 4
8 7
O
1
phone
Handsfree Answerback
• Use Handsfree Answerbackto answer a voice-announced Intercom call by
speaking toward your phone — without lifting the handset.
Speak toward the Microphoneto respond
to voice-announced Intercom calls.
Press  for the feature key functions
in blue: Last Number Redial, Save and
Park.
flashes when you have Message
Waiting or Voice Mail messages left for
you.
is on when:
•You have left a Message...

Placing an Outside Call . . .
1. Lift handset.
• Listen for dial tone.
2. + Outside number.
• When behind a PBX, you may have to
dial another 9 before your number.
OR
2. + Line group number (1-
9 or 01-99 or 001-128) + Outside number.
• When behind a PBX, you may have to
dial 9 before your number.
OR
2. + Line number (e.g., 05 or
005 for line 5) + Outside number.
• When behind a PBX, you may have to
dial 9 before your number.
Calling a Co-Worker, Voice Mail and Paging . . .
1. Lift handset.
2. Dial...

If your call doesn’t go through . . .
Camp On and Callback
1. to Camp On(wait without hanging up).
•(Intercom calls) If you hear two beeps,
you can speak. If you hear busy/ring, dial
6 to send a Voice Over.
•(Outside calls) When you hear new
dial tone, place your call again.
OR
1. and hang up to leave a Callbackfor
a free line or extension.
•Wait for the system to call you back.
2. Lift handset when the system rings you back.
•(Outside calls) Place your call again.
•(Intercom calls) Speak to co-worker....

Answering Outside Calls . . .
1. Lift handset.
Answering Intercom Calls . . .
1.(DSL only) If you hear two short beeps:
Speak toward your phone.
•You can lift the handset for privacy.
OR
1.If you hear one long ring:
Lift handset to speak.
•Lift handset + 823 makes your incom-
ing Intercom calls ring. Lift handset +
821 makes them voice-announce.
Picking up calls not ringing your phone . . .
1. Lift handset.
2. + .
1. Lift handset.
2. + Co-worker’s extension.
Have a telephone meeting (Conference) . . .
1....

Your call can wait at your phone . . .
Hold
1. Do not hang up +  + Do not hang up.
•For DSLs, this puts your outside call
on System Hold. Your co-workers can
take the call off Hold. For SLTs, this
puts your call on Exclusive Hold.
•To place the call on Exclusive Hold,
dial 849 after pressing HOLD.
•To place the call on Group Hold (so only
those in your Department can pick up the
call), dial 832 after pressing HOLD.
•Intercom calls automatically go on
Exclusive Hold when you press HOLD.
1. Lift handset...

Park a call in orbit . . .
1. Do not hang up.
Park a call in a System Orbit
2. (DSL only)  +  + Park Orbit.
OR
2. +  + Park Orbit.
•Park Orbits are 1-64.
OR
Personal Park a call at your extension
2. + .
3. Page your co-worker to pick up the call.
•For Paging, dial ✻1 + 0  for All Call
or 
✻1 + 1-64 for zones.
4. Hang up.
1. Lift handset.
For a Call Parked in a System Orbit
2. (DSL only)  +  + Park Orbit.
OR
2. +  + Park Orbit.
•Park Orbits are 1-64.
OR
For a Call Parked in a Personal Park Orbit
When...

Forward your calls to a co-worker . . .
1. Lift handset +  .
2. Dial Call Forwarding condition:
1 = Personal Answering Machine Emulation
(then skip to step 4)
2 = Busy or not answered
4 = Immediate
6 = Not answered
7 = Immediate w/simultaneous ringing
(not for Voice Mail)
0 = Cancel
3. Dial destination extension, Voice Mail
master number or press Voice Mail key.
4. Dial Call Forwarding Type:
2 = All calls
3 = Outside calls only
4 = Intercom calls only
•To forward off-premise: ✻46 + Line
access (e.g., 9)...

Quickly dial co-workers and outside calls . . . 
Common and Group Abbreviated Dialing (Speed Dial)
(You cannot store Common or Group
Abbreviated Dialing numbers.)
1. Lift handset.
2. + Bin (for Common).
OR
2. + Bin (for Group).
Personal Abbreviated Dialing (Speed Dial)
1. Lift handset +  .
2. Bin (0-9) + Trunk access code + Number
to store.
• Trunk access codes are 9, #9 + trunk
number and 804 + trunk group.
• The total number of digits stored can-
not exceed 24.
3. Hang up.
1. Lift handset + + Bin...