NEC Ht1100 Entertainment Projector Users Manual

E-21
5. Press the ENTER button.
6. Use the SELECT 

 button to move the projected image frame
as shown on the example.
7. Press the ENTER button.
Screen
The confirmation screen is displayed.
On the Cornerstone adjustment screen, select
“Exit” or press the CANCEL button on the re-
mote control. 8. Use the SELECT 

 button to select another icon which points
in the direction.
Screen
9. Press the SELECT 
 or  button to highlight the [OK] and press the
ENTER button.
This completes the keystone...

E-22
Turning Up or Down Volume
Sound level from the speaker on the projector can be adjusted when
the menu is not displayed.
increase volume
Volume bar decrease volume
Turning off the Projector
To turn off the projector:
First press the POWER (ON/STAND BY) button on the projector cabi-
net or the POWER button on the remote control for a minimum of two
seconds.
LIGHTCOMPONENT
POWER
COMPUTERVIDEO
MENUCANCEL
COMP.V
COMP.DVI
S-VIDEO
ENTER
The power indicator will glow orange. After the projector turns off,...

E-23
CONVENIENT FEATURES
Move the viewable
area up or down
Move the position of
an image up or downZoom or V-Zoom UP DOWN
Cinema UP DOWN
When “4:3” is selected in Screen Type:
When “16:9” and “Anamorphic”(*) are selected in Screen Type:
Move the viewable
area up or downZoom UP DOWN
Table of Availability for Image Position
For PC, DVD Progressive, 480p, 480i, 576p, 576i
Screen Type
4:3Aspect Ratio
Normal
Not available
Not availableFull
Not availableZoom
Available
AvailableCinema
AvailableV-Zoom...

E-24
Enlarging and Moving a Picture
You can enlarge the area you want up to 400 percent.
To  do so:
To enlarge the image:
1. Press the MAGNIFY(+) button.
Getting the On-line Help
You get the contents about Help.
Display Help Exit Help 2. Press the MAGNIFY(–) button to return to its original size.
To enlarge the image:
Use the SELECT button to move the enlarged portion.
NOTE: The FREEZE button does not work when an image is magnified.
AUTO ADJ.
PIC-MUTE
POSITION MAGNIFY3D REFORMMENU
ASPECT
DOWNUPAUTO...

E-25
USING ON-SCREEN MENU
Using the Menus
1. Press the MENU button on the remote control or the projector cabinet to display the menu.
The Picture menu will be displayed (factory preset).
NOTE: The commands such as , ENTER, CANCEL in the gray bar show available buttons for your operation.
2. Press the SELECT 
 buttons on the remote control the projector cabinet to display the submenu.
3. Press the ENTER button on the remote control or the projector cabinet to highlight the top item or the first tab....

E-26
Menu tree
Main menu Submenu Items
Picture
ImagePreset
Reference
Brightness
Contrast
Color
Hue
Sharpness
Noise Reduction
Detail Settings
Page 1
Page 21 to 5
Video, Movie, Game, sRGB, Graphic
Off, Low, Medium, High
Dynamic, Natural, Black Detail
5000, 5400, 6000, 6500, 7000, 7800, 8500, 9300, 10500 
Off, On, Split
0 to 63
Off, On
Off, On
Off, Auto
Off, 1, 2, 3, 4, 5
-3, -2, -1, Off, 1, 2, 3
Normal, Zoom, Cinema, V-Zoom
Normal, Full, Zoom, Stadium
Top, Bottom, Left, Right
Horizontal, Vertical, Clock,...

E-27
Main menu Submenu Items
Setup
Information
ResetPage 1
Page 2
Page 3
Page 1
Page 2
Page 3
Page 44:3, 16:9, Anamorphic
-64 to 64
Desktop Front, Ceiling Rear, Desktop Rear,
Ceiling Front
Normal, Eco
Off, On
Blue, Black, Logo
English, Deutsch, Français, Italiano, Español,
Svenska, Suomi, Norsk, Nederlands, Türkçe,
Polski,
RGB/Component, RGB, Component, Scart
Auto, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60,SECAM
Auto, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60,SECAM
Idle Mode, Power-saving Mode...

E-28
Menu windows or dialog boxes typically have the following elements:
Highlight ............. Indicates the selected menu or item.
Solid triangle ...... Indicates further choices are available. A highlighted triangle indicates the item is active.
Tab..................... Indicates a group of features in a dialog box. Selecting on any tab brings its page to the front.
Radio button ....... Use this round button to select an option in a dialog box.
Check box .......... Place a checkmark in the square box...

E-29
Menu Descriptions & Functions
Picture
[Preset]
This option allows you to adjust neutral tint for yellow, cyan or magenta.
There are 5 factory presets optimized for various types of images, you
can set user adjustable settings.
Selecting Reference Setting [Reference]
This feature allows you to use color correction or gamma values as
reference data to optimize for various types of images. You can select
one of the following five settings.
Video ............. Recommended for regular picture such as TV...

E-30
Deinterlace
Turns on or off the deinterlace function.
On .................. Default standard setting.
Off .................. Select this option if there are some jitter or artifacts in
video.
NOTE: This feature is not available for Scart, 480p, 576p, and non-1080i HDTVand RGB signals.
Telecine (available only when Deinterlace is on)
Use 3:2 pull down correction to eliminate jitter and artifacts in video.
Auto ............... For film source such as a DVD player.
Off .................. For signals...