NEC Gt2150 Lcd Projector Users Manual

E – 41
Menu Descriptions & Functions
Source Select
Enables you to select a video source such as a VCR, DVD player, laser
disc player, computer or document camera depending on what is
connected to your inputs.
Press the up/down buttons on your remote control or the projector cabi-
net to highlight the menu for the item you want to project.
* RGB1,2
* DVI DIGITAL
* Video 1, 2
* S-Video
* RGB 1 (VIDEO)
* RGB 1 (S-VIDEO)
Swicher
You can select the slot number from 1 to 10 of the Switcher(s) ISS-
6020.
When...

E – 42
Use the  or  button to choose Normal when in a lighted room and
Natural 1&2 when in a darkened room. Natural 1 for better flesh
tone; Natural 2 for true reproduction of middle tones.
Each mode is recommended for :
Normal ......... For the regular picture
Natural 1 ...... For true color reproduction of natural tones
Natural 2 ...... For dark portions of a picture
Picture
Select List and press ENTER to display the direct Key assign-
ment list.
Select OK and press ENTER to close the window.
To...

E – 43
Horizontal/Vertical Position (when Auto Adjust is off):
Adjusts the image location from left to right.
This adjustment is made automatically when the Auto Adjust is
turned on.
Aspect Ratio (not available for RGB) :
You can select the aspect ratio for input signal and display area re-
spectively.
Select the appropriate aspect ratio using the SELECT 
 ,  , 
, or
 button.
NOTE: When Resolution is set to Native, this feature is not available, andthe stored settings and adjustments are invalid....

E – 44
Color Matrix
First, select an appropriate color matrix for your input signal, either
HDTV or SDTV. Then select an appropriate matrix type from B-Y/
R-Y, Cb/Cr, Pb/Pr or IVX.
NOTE: The Color Matrix feature is available for component video signalonly.
Y/C Delay (not available for RGB)
Adjusts Y/C delay level.
Telecine
Use 3:2 pull down correction to eliminate jitter and artifacts in video.
Auto ............. For film source such as a DVD player
Off ................ For signals other than film...

E – 45
Adjusts the sound level of the projector.
NOTE: You can also display the volume bar without opening the menu. SeeVolume Bar (Direct Button)on page E-48 for more details.
Select either the RGB signal type or the Component signal type.
RGB ............. RGB signal
Component .. Composite signals such as YCbCr/YPbPr
NOTE: This feature is available on RGB 1 and 2 only.
Switcher Gain
This feature adjusts the input level of the signal. This must be done
to each color:R, G, and B.
Keystone
This feature...

E – 46
Projector Options
Enables you to set preferences and other operating options.
Timer
Enables you to turn on or off your projector automatically at a specified
time. Two timer functions are available: On/Off Timer and Sleep Timer.
On/Off Timer
Up to eight settings can be programmed.
•Before setting On/Off Timer, make sure that Date, Time Preset feature is
set.
•Even after setting On/Off Timer, turning the projector on or off with the
remote control is possible.
•There are two time display formats:...

E – 47
Allows you to set preferences for the on-screen menu.
Press OK to save your changes for all the features.
Menu Mode:
This feature allows you to select two menu modes: Advanced Menu
and Basic/Custom Menu.
Advanced Menu ..........This is the menu that contains all the available menus
and commands.
Basic/Custom Menu .... This is the menu that you can customize using the
Basic/Custom Menu Edit to fit your needs.
The factory default Basic/Custom menu includes:
Source Select (RGB1/2, DVI DIGITAL,...

E – 48
Message:
You can choose the desired information to be displayed on the
screen.
No Input: This option turns on or off the No Input message to be
displayed in the top right corner on the screen.
On ................ The message will be displayed.
Off ................ The message will not be displayed.
Clean Filter: This option turns on or off the Please clean the filters
message each time you turn on the projector if the projector has
been used in excess of 100 hours of use.
On ................ The...

E – 49
[Page 3]
Signal Select (VIDEO 1/2 and S-VIDEO)
This feature enables you to select composite video standards manu-
ally. Normally select Auto.
Select the video standard from the pull-down menu. This must be
done for Video and S-Video separately.
Signal Select (RGB Connector)
Allows you to choose “VIDEO” or “S-VIDEO” for RGB1 connector.
Normally select “Auto”.
[Page 4]
Auto Adjust (RGB Only)
When Auto Adjust is turned on, the projector automatically deter-
mines the best resolution for the current...

E – 50
[Page 6]
[Page 5]
Communication Speed
This feature sets the baud rate of the PC CONTROL connector
(Mini D-Sub 9 Pin).
It supports data rates from 4800 to 38400 bps.
The default is 38400 bps. Select the appropriate baud rate for your
equipment to be connected.Clear Lamp Hour Meter:
Resets the lamp clock back to zero. Pressing this button appears a
confirmation dialog box. To reset the lamp usage hour, press OK.
NOTE: The projector will turn off and go into standby mode after 1600 hours
(up to 2100...