NEC Gt2150 Lcd Projector Users Manual

E – 21
Set up the projector
1. Turn on the projector
2. Select your type of projection:
Desktop front, ceiling rear, desktop rear, and ceiling front.
3. Display the test pattern by pressing the TEST button on the re-
mote control or using the menu.
TEST
4. Adjust the image position and the image size.
(1) Press and hold the CTL button and press the POSITION button to display
the Lens Shift adjustment screen.
Use the Select button on the remote control or the LENS SHIFT button on
the projector cabinet to...

E – 22
Other adjustments
Rotate the projector to make the
image square.
Use keystone correction for
proper adjustment.
Rotate the four feet to make the
image square to the screen.
R
E
M
O
T
E
 1 P
C
 C
O
N
T
R
O
L
REMOTE2
S
C
, T
R
IG
G
E
R O
U
TO
U
T ININ
PC CARD
AC
 IN
 D
V
I D
IG
IT
A
L
D
V
I D
IG
ITA
L
OUTPUTL
/M
O
N
O
L/M
O
N
O
R
G
B
 2
R
G
B
 1
V
ID
E
O
 1
V
ID
E
O
 2
S-
V
ID
E
O
A
U
D
IO
 O
U
T R
/C
rG
/YB
/C
b
V
H
/H
V A
N
A
LO
GR
L
/M
O
N
OR
L/M
O
NORL
/M
O
N
OR R
UpDown Each of the feet height...

E – 23
4. CONNECTIONS
When used in standalone operation
Connecting Your VCR Or Laser Disc Player
Use common RCA cables (not provided) to connect your VCR or laser disc player to your GT2150 Projector. To
make these connections, simply:
1. Turn off the power to your projector and VCR or laser disc player.
2. Connect one end of your RCA cable to the video output connector on the back of your VCR or laser disc
player, connect the other end to the Video input on your projector. Use standard RCA audio patch...

E – 24 Connecting Your DVD Player with Component Output
Use the optional Component V cable to connect your DVD player with the component output to your GT2150
Projector. To make these connections, simply:
1. Turn off the power to your projector and DVD player.
2. Use the optional Component V cable to connect your DVD player to the RGB 1 input or use a D-Sub 15 pin
cable to the RGB 2 input of your GT2150 projector.
3. Turn on the projector and the DVD player.
L/MONO
L/MONO
RGB 2
RGB 1
VIDEO 1
VIDEO 2
S-...

E – 25 Connecting Your PC Or Macintosh Computer
Connecting your PC or Macintosh computer to GT2150 Projector will enable you to project your computers screen
image for an impressive presentation.
To connect to a PC or Macintosh :
1. Turn off the power to your projector and computer.
2. Use an RGB signal cable (not supplied) to connect your PC or Macintosh computer to the projector.
3. Turn on the projector and the computer.
4. If the projector goes blank after a period of inactivity, it may be caused by...

E – 26Using OUTPUT Connectors
You can connect a separate, external monitor to your GT2150 projec-
tor to simultaneously view on a monitor the RGB analog, or compo-
nent image youre projecting. To do so:
1. Turn off the power to your projector, monitor and computer.
2. Use a 15-pin cable to connect your monitor to the ANALOG OUT-
PUT (Mini D-Sub 15 pin) connector on your projector.
3. Turn on the projector, monitor and the computer.
NOTE: The ANALOG OUTPUT connector outputs RGB signal during standby.
When...

E – 27 Connecting to a Single Workstation
You can connect a workstation to your GT2150 projector. To do so:
1. Turn off the power to your projector  and workstation.
2. Use a BNC x 5 cable to connect your workstation and the RGB 1 connectors on your projector.
3. Turn on the projector and a workstation.
L/MONO
L/MONO
RGB 2
RGB 1
VIDEO 1
VIDEO 2
S-
VIDEO AUDIO OUTR/Cr G/Y B/Cb
V H/HVR
L/MONO R
L/MONO R L/MONO RR
L/MONO R
OUTPUTANALOG
DVI DIGITAL
DVI DIGITAL
To RGBHV output To RGBHV output
Signal...

E – 28
REMOTE 1 PC CONTROL
REMOTE2
SC. TRIGGER OUT OUTIN IN
RGB 2
RGB 1
VIDEO 1
VIDEO 2
S VIDEO AUDIO OUTR/Cr G/Y B/Cb
V H/HV
L/MONO R
L/MONO R L/MONO R
L/MONO R
OUTPUTANALOG
When Used with One Switcher (ISS-6020/ISS-6020G)
Up to 10 input signals can be accepted when the projector is connected to one Switcher. Using the projector with
the Switcher allows easy adjustment and signal selection.
ISS-6020
Personal computer
VCR
To REMOTE1To RGBHV output
Optional control cable 15p-15p
(CTL-6010)To audio input...

E – 29
When Used with Two or More Switchers  (100 Inputs)
Up to 100 inputs can be accepted using the NEC ISS-6020 Switcher.
How to make connections:
1 Connect the REMOTE 1 terminal of the master Switcher to the REMOTE 1 of the projector using the
optional control cable (15p-15p/CTL-6010).
2 Next connect the REMOTE 2 terminal of the master Switcher to the REMOTE 1 terminal of the first slave
Switcher using the same optional control cable as mentioned above. Third, connect the REMOTE 2 termi-
nal of the...

E – 30 Set the DIP switch (S8601) of the Switcher as follows:
The Projector
Slot 1 of the Master
Slot 2 of the Master
Slot 3 of the Master
Slot 4 of the Master
Slot 5 of the Master
Slot 6 of the Master
Slot 7 of the Master
Slot 8 of the Master
Slot 9 of the Master
Slot 10 of the MasterMaster
Slave 1
Slave 2
Slave 3
Slave 4
Slave 5
Slave 6
Slave 7
Slave 8
Slave 9
Slave 10 ISS-6020
ISS-6020GOutput toSetting of S8601
NOTE: Slave numbers 1 to 10 must correspond to the master’s slot numbers 1 to 10.
OPEN...