NEC Gt2000r Lcd Projector Users Manual

							E-51
0 01
1 2 3
4
5
6
12345678910111213im)
im)
1420 Alignment
H Position
V Position
Picture Adjust
Fine Picture
H Amplitude
V Amplitude
Image Filter
Option
Auto Alignment
Adjusting the Horizontal Pixel Size and Phase (Picture
Adjust and Fine Picture)
Before making the adjustment, press the EXPAND button and turn OFF the
Digital Zoom function.
Adjust the clock frequency, then adjust the horizontal position.
¥ Adjusting the Clock Frequency (Picture Adjust)
This function adjusts the pixel size of the computer and the pixel size of the
LCD of the projector so that they become the same size.
Select [Alignment]® [Picture Adjust] from the main menu.
When the item to be adjusted is selected, the adjustment value of the selected
item is displayed at the bottom edge of the display.
Adjust the clock frequency with the cursor § (Ð) / © (+) button.
The optimum adjustment value is where the brightness of the screen becomes
constant (i.e., the bright and dark vertical bands disappear).
The adjustment range will differ depending on the input signal.
Holding down the button will change the clock frequency continuously. Fine
adjustments can be made by single presses of the button. 
						

							E-52
0 01
1 2 3
4
5
6
12345678910111213im)
im)
183 Alignment
H Position
V Position
Picture Adjust
Fine Picture
H Amplitude
V Amplitude
Image Filter
Option
Auto Alignment ¥ Adjusting the Horizontal Phase (Fine Picture)
This function adjusts the phase of the pixels of the computer and the phase of
the pixels of the LCD of the projector so that they are the same phase. The
adjustment is made to the point at which the screen color infidelity and flicker
are at a minimum.
Select [Alignment] ® [Fine Picture] from the main menu.
When the item to be adjusted is selected, the adjustment value of the selected
item is displayed at the bottom edge of the display.
Adjust the horizontal phase with the cursor § (Ð)/ © (+) button.
The optimum adjustment value is where the screen color infidelity and flicker
are at a minimum.
The adjustment range is from 0 to 255.
Holding down the button will change the horizontal phase continuously. Fine
adjustments can be made by single presses of the button.
Making Adjustments While Viewing the Entire Screen
Hold down the CTL button and press the DISPLAY button to temporarily turn
off the on-screen menu display. Now, only the cursor § (Ð) / © (+) button will
function. When another button is pressed, the menu will come back on.
Last press the EXPAND button and turn on the Digital Zoom function. 
						

							E-53
0 01
1 2 3
4
5
6
12345678910111213im)
im)
0 01
1 2 3
4
5
6
12345678910111213im)
im)1368 Alignment
H Position
V Position
Picture Adjust
Fine Picture
H Amplitude
V Amplitude
Image Filter
Option
Auto Alignment
0 01
1 2 3
4
5
6
12345678910111213im)
im)
0 01
1 2 3
4
5
6
12345678910111213im)
im)
1024 Alignment
H Position
V Position
Picture Adjust
Fine Picture
H Amplitude
V Amplitude
Image Filter
Option
Auto Alignment
Changing the Display Size (Horizontal Amplitude and Ver-
tical Amplitude)
The projector already stores the standard personal computer and work station
resolutions in standard memory. When an RGB signal is input, the closest
resolution is selected from among those stored and the signal is displayed.
(When the information is stored in the user memory, it is searched from the
user memory.) It is for this reason that when the scanning frequency differs
from the value of the standard memory, the display area or aspect ratio will
also differ. The horizontal magnification and vertical magnification are used to
adjust this.
¥ Adjusting the Horizontal Amplitude
This function adjusts the horizontal display size to suit the screen.
Select [Alignment] ® [H Amplitude] from the main menu.
When the item to be adjusted is selected, the adjustment value of the selected
item is displayed at the bottom edge of the display.
Adjust the horizontal amplitude with the cursor § (Ð)/ © (+) button.
The adjustment range will differ depending on the input signal.
Holding down the button will result in a continuous change. Fine adjustments
can be made by single presses of the button.
¥ Adjusting the Vertical Amplitude
This function adjusts the vertical display size to suit the screen.
Select [Alignment] ® [V Amplitude] from the main menu.
When the item to be adjusted is selected, the adjustment value of the selected
item is displayed at the bottom edge of the display.
Adjust the vertical amplitude with the cursor § (Ð)/ © (+) button.
The adjustment range will differ depending on the input signal.
Holding down the button will result in a continuous change. Fine adjustments
can be made by single presses of the button.
Change the horizontal or the vertical amplitude when the aspect ratio of the
screen differs from normal (i.e., a circle has become and ellipse). 
						

							E-54
0 01
1 2 3
4
5
6
12345678910111213im)
im)
0 01
1 2 3
4
5
6
12345678910111213im)
im)
Alignment
H Position
V Position
Picture Adjust
Fine Picture
H Amplitude
V Amplitude
Image Filter
Option
Auto Alignment
Filter
On
Off
Alignment
H Position
V Position
Picture Adjust
Fine Picture
H Amplitude
V Amplitude
Image Filter
Option
Auto Alignment
Option
V Phase
Skew Correction
Sync Position
Clamp Timing
Option
V Phase
Skew Correction
Sync Position
Clamp Timing ¥ Reducing Noise (Image Filter)
This function reduces video noise.
Select [Alignment] ® [Image Filter] from the main menu, then press the
ENTER button. The image filter selection display will appear.
Select On/Off with the cursor s/t button.
On ........................The low-pass filter is applied.
Off ........................The filter is removed.
Screen adjustments are possible even when the filter is On.
Other Screen Adjustments (Vertical Phase, Skew Correc-
tion, Sync Position, and Clamp Timing)
Select [Alignment] ® [Option] from the main menu, then press the ENTER
button. The option menu will be displayed.
¥ Vertical  Phase
This function adjusts the vertical pixel phase when an irregularity arises while
making fine vertical movements of the screen or in the interlaced display.
Select [V Phase] with the cursor s/t button.
When the item to be adjusted is selected, the adjustment value of the selected
item is displayed at the bottom edge of the display.
Adjust to a normal condition with the cursor § (Ð)/ © (+) button.
The adjustment range is from 0 to 7.
¥ Skew Correction
This function adjusts the vertical bending of the screen.
Select [Skew Correction] with the cursor s/t button.
When the item to be adjusted is selected, the adjustment value of the selected
item is displayed at the bottom edge of the display.
Adjust the bending with the cursor § (Ð)/ © (+) button.
The adjustment range is from 0 to 8. 
						

							E-55
0 01
1 2 3
4
5
6
12345678910111213im)
im)
¥ Sync Position
This function selects whether the leading edge or the trailing edge of the
horizontal sync pulse is set to the standard position (i.e., the PLL phase basis
of comparison) and switches the sync position when jitter appears on the
screen.
Select [Sync Position] with the cursor s/t button.
When an item is selected, its adjustment values are indicated on the right
bottom of the menu.
While viewing the screen, select the item that results in the least distortion
with the cursor § (Ð)/ © (+) button.
The adjustment values are 0 or 1.
¥ Clamp Timing
This function sets the standard position of the black level of the picture and is
used to set the level of screen brightness to an optimum level.
Select [Clamp Timing] with the cursor s/t button.
Selecting sync position moves the horizontal position. Adjust the horizontal
position.
While viewing the screen, select 0 or 1 with the cursor § (Ð)/ © (+) button.
Adjusting the Alignement Automatically (Auto Alignment)
This function automatically adjusts the clock frequency, the horizontal/vertical
position and H/V amplitude.
Depending on the pattern, adjustment may not be possible.
Select [Alignment] ® [Auto Alignment] from the main menu, then press the
ENTER button. The verification display will appear.
Select Yes/No with the cursor s/t button.
Repeat until an optimum screen is obtained.
NOTE: Automatic adjustment will not function with VIDEO or S-VIDEO input.
When using RGB input, automatic adjustment will not function when NTSC, PAL/
SECAM, or HDTV is input.
Option
V Phase
Skew Correction
Sync Position
Clamp Timing
Option
V Phase
Skew Correction
Sync Position
Clamp Timing
Alignment
H Position
V Position
Picture Adjust
Fine Picture
H Amplitude
V Amplitude
Image Filter
Option
Auto Alignment
Auto Alignment
On
Off 
						

							E-56
USING USER MEMORY AND
CHANNEL MEMORY (Memory)
Before Using the Memory Function
The projector uses a microprocessor to automatically iden-
tify the input signal. Therefore, it is necessary to set and store
in the microprocessor the adjustment conditions of such set-
tings as the alignments and picture settings that match the
input signal and that an optimum picture can be reproduced.
The projector is equipped with five kinds of memory. There
is standard memory that cannot be overwritten, user memory
to which the user can freely write or overwrite (and to which
switcher channels can be registered), special switcher chan-
nel memory that is used when this main unit and a number of
switchers are connected and used together , the default area
in a one-to-one correspondence with areas of the standard
memory, and last memory that stores the latest settings for
each source (RGB1, RGB2, Video, and S-Video)
Types of Memory
¥ Standard Memory (Preset at Time of Shipping)
Video signals of the type used in personal computers and
work stations currently on the market have been registered in
the projector as standard data (and cannot be overwritten).
See Displayable Video Signals on Page E-82.
When displaying personal computer video signals (resolu-
tion/frequency) that have not been registered to standard
memory, make the screen and picture adjustments and then
register them to user memory.
¥ User Memory
When data that has been adjusted by the user is stored to user
memory, it can be called back and used at any time.
A maximum of 100 items of screen and/or picture adjustment
or setting data can be registered.
¥ Channel Memory
This special memory for switchers is used to simultaneously
register the screen adjustment data and the data of the
switcher when the projector is used in conjunction with a
switcher.
A maximum of 100 channels (10 per switcher with max. of
10 switchers) of setting data (for the various pieces of equip-
ment that are connected to the switchers) and the screen and
picture adjustment data (adjusted by the projector) can be
registered.¥ Default Area
This is a rewritable memory that is in a one-to-one corre-
spondence with areas of the standard memory.
The projector searches the settings in the default area before
the standard memory.
The factory shipped default area settings are the same as in
the standard memory.
¥ Last Memory
This is a memory that stores the last settings for each source
(RGB1, RGB2, Video, and S-Video).
Switching sources will store the settings in memory. For this
reason, even if the memory is not used, returning to its
original source will store the adjustments in memory.
Automatic Searches of Memory
The channel memory is searched first when used with the
switcher (s).
When the input is switched, the projector searches the user
memory for the existence of applicable registration memory
during input selection (of input source) or switcher slot selec-
tion (RGB and RGB2 only). When more than one such
memory item appear, the most recent memory number is
selected. When there is no such memory item, the unit
searches irrespective of input selection or slot selection.
When there is no applicable memory item in user memory,
the default area and a standard memory search is performed
in this order (but there will not be a search when there is a
skip setting). 
						

							E-57
Memory Selection and Item Contents
Selecting Memory Display
The user memory is displayed by pressing the MENU button and displaying [Main Menu], selecting [Memory] with the cursor
button, and then pressing the ENTER button.
To switch between user memory and channel memory displays, hold down the CTL button and select with the cursor s/t
button.
Switch pages with the cursor § (Ð)/ © (+) button. (There are 10 pages of user memory and 10 pages of channel memory.)
To display the list number selection and the registration menu, use the cursor s/t button to align the selection bar with the
desired list number, then press the ENTER button.
Main Menu
Picture
Alignment
Memory
Switcher
Display Menu
Settings Menu
Source
User Memory
P01/10
No Name Source Slot Lock
00 CUTOM 0001 RGB1 Off
01
02
03 CUTOM 0004 S-VIDEO Off
04
05
06 CUTOM 0007 YCbCr1 On
07 CUTOM 0008 RGB2 On
08
09 CUTOM 0010 VIDEO OffChannel Memory
P01/10
No Name Source Lock
00 CUTOM 0001 RGB1 Off
01
02
03 CUTOM 0004 S-VIDEO Off
04
05
06 CUTOM 0007 YCbCr1 On
07 CUTOM 0008 RGB2 On
08
09 CUTOM 0010 VIDEO Off
Signal Entry
Entry Copy
Entry Move
Entry Delete
Change Defalut
Memory edit
Load
Store 
						

							E-58
Selecting the Various Items and Switchers
¥ Selecting User Memory
No .........................List number
Name....................Signal name entered by the user
Source..................This is the set input mode.
(RGB 1, RGB 2, YCbCr1, YCbCr2, VIDEO, and S-VIDEO)
Slot.......................This is the slot number of the channel. It is termed the channel in this manual.
User Memory
P01/10
No Name Source Slot
Lock
00 CUTOM 0007 RGB1 04
On
01 CUTOM 0008 RGB2 07/08
Off
02
Currently selected page
Total number of pages
*
The [*] display appears when the skip setting is on.
07/08 indicates the selection of the equipment that is connected to the number 8 slot of
the master switcher, which is connected to the number 7 slot of the slave switcher.
04 indicates the selection of the equipment that is connected to the number 04 slot of the switcher.
Lock ......................This is the on/off setting of the auto scan function at the time of input signal switching. It is selected
with the edit menu.
¥ Selecting Channel Memory
In user memory, the slot specification differs.
Channel Memory
P01/10
No Name Source
Lock
00 CUTOM 0007 RGB1
On
01 CUTOM 0008 RGB2
Off
Currently selected page
Total number of pages
In channel memory, the memory number becomes the channel number, which corresponds with the slot number of the switcher.
In signal registration, this number is selected and registration is made to this number.
Settings will differ depending on the switcher connection method. See Changing the Slot Number of the Switcher (slot)
Switcher Control on Page E-67.
When the Setting is [SW 1 Level] (One Unit)
When the Setting is [SW 1 Level] (One Unit)
Channel numbers 10 through 19 correspond with switcher slot numbers 01 through 10. (Note that channel 10 will be slot 10, and
channel 11 will be slot 01.)
When the Setting is [SW 2 Level] (Two or More Units)
Channel numbers 00 through 09 correspond with slot numbers 1 through 10 of the slave switcher that is connected to slot 10 of
the master switcher.
Channel numbers 10 through 19 correspond with slot numbers 1 through 10 of the slave switcher that is connected to slot 1 of the
master switcher.
Channel numbers 90 through 99 correspond with slot numbers 1 through 10 of the slave switcher that is connected to slot 9 of the
master switcher. 
						

							E-59
Storing the Adjustment Data (Store)
This function is used to store the screen and picture adjustment data currently
being projected.
The signal name and other data can be edited later.
1. Project the Picture of the Input Equipment
Select [Memory] ® [User Memory] or [Channel Memory] from the main
menu.
The user memory or channel memory will be displayed.
See Selecting Memory Display on Page E-57 for details.
2. Select the Number to Be Stored
Press the remote control s/t button and select the list number or the channel
number, then press the ENTER button.
The display will change to the signal registration menu.
(When input selection and projection are conducted from the user memory or
the channel memory, the selection cursor will move to that number.)
3. Storing the Adjustment Data
1) Press the remote control s/t button, select [Store], then press the ENTER
button.
The display will change to the store verification display.
2) Press the remote control s/t button, select Yes/No, then press the ENTER
button.
* When a registered number is selected, the overwrite verification display will
appear.
This ends the data storage procedure.
To turn off the display, press the MENU button. When the display has returned
to the main menu, press the MENU button again to turn off the display.
User Memory
P01/10
No Name Source Slot Lock
00 CUTOM 0001 RGB1 Off
01
02
03 CUTOM 0004 S-VIDEO Off
04
05
06 CUTOM 0007 YCbCr1 On
07 CUTOM 0008 RGB2 On
08
09 CUTOM 0010 VIDEO Off
User Memory
P01/10
No Name Source Slot Lock
00 CUTOM 0001 RGB1 Off
01
02
03 CUTOM 0004 S-VIDEO Off
04
05
06 CUTOM 0007 YCbCr1 On
07 CUTOM 0008 RGB2 On
08
09 CUTOM 0010 VIDEO Off
Signal Entry
Entry Copy
Entry Move
Entry Delete
Change Defalut
Memory edit
Load
Store
Store?
Ye s
No
Overwrite?
Ye s
No 
						

							E-60
User Memory
P01/10
No Name Source Slot Lock
00 CUTOM 0001 RGB1 Off
01
02
03 CUTOM 0004 S-VIDEO Off
04
05
06 CUTOM 0007 YCbCr1 On
07 CUTOM 0008 RGB2 On
08
09 CUTOM 0010 VIDEO Off
Data Reading of Registration Signals (Load)
Adjustment and setting data are registered to suit the purpose of the external
equipment in the user memory and channel memory. This allows the input to
be switched and projected immediately when the projector is used in a system
or some other configuration. The desired adjustment and setting data can also
be called without switching the input.
1. Displaying the Memory Display
Select [Memory] ® [User Memory] or [Channel Memory] from the main
menu.
The user memory or channel memory will be displayed.
See Selecting Memory Display on Page E-57 for details.
2. Select the Desired Number
Press the remote control s/t button and select the list number or the channel
number, then press the ENTER button.
The display will change to the signal registration menu.
3. Retrieving the Signal Data
Press the remote control s/t button and select [Load].
Retrieving All the Data
Press the ENTER button.
The display will change to the load verification display.
Press the remote control s/t button, select Yes/No, then press the ENTER
button.
Retrieving Data Other than Source Data
(Data is called without performing input switching.)
Hold down the CTL button and press the ENTER button.
The display will change to the data load verification display.
Press the remote control s/t button, select Yes/No, then press the ENTER
button.
This ends the data retrieving procedure.
At this time, auto search during input signal switching will be invalid. (Lock On
condition.)
User Memory
P01/10
No Name Source Slot Lock
00 CUTOM 0001 RGB1 Off
01
02
03 CUTOM 0004 S-VIDEO Off
04
05
06 CUTOM 0007 YCbCr1 On
07 CUTOM 0008 RGB2 On
08
09 CUTOM 0010 VIDEO Off
Signal Entry
Entry Copy
Entry Move
Entry Delete
Change Defalut
Memory edit
Load
Store
Load?
Ye s
No
Data Load?
Ye s
No