NEC Gt2000 Lcd Projector Users Manual

E-61
Copying All the Data (Entry Copy)
This function copies the registered signal data (i.e., the copy source) to the
selected number (i.e., the copy destination).
1. Displaying the Signal Registration Menu Display
Select [Memory] ® [User Memory] or [Channel Memory] from the main
menu, then press the ENTER button.
The signal registration menu display will appear.
See Selecting Memory Display on Page E-57 for details.
2. Copying
Press the remote control s/t button and select [Entry Copy], then press the...

E-62
Signal Entry
Entry Copy
Entry Move
Entry Delete
Change Defalut
Memory edit
Load
Store
User Memory
P01/10
No Name Source Slot Lock
00 CUTOM 0001 RGB1 Off
01
02
03 CUTOM 0004 S-VIDEO Off
04
05
06 CUTOM 0007 YCbCr1 On
07 CUTOM 0008 RGB2 On
08
09 CUTOM 0010 VIDEO Off
Entry Move: Select Source
User Memory
P01/10
No Name Source Slot Lock
00 CUTOM 0001 RGB1 Off
01
02
User Memory
P01/10
No Name Source Slot Lock
00 CUTOM 0001 RGB1 Off
01 CUTOM 0007 YCbCr1 On
02
03 CUTOM 0004 S-VIDEO Off
04
05
06
07 CUTOM...

E-63
Deleting a Range of Data (Entry Delete)
This function specifies the range that is to be deleted and deletes the signal
data.
1. Displaying the Signal Registration Menu Display
Select [Memory] ® [User Memory] or [Channel Memory] from the main
menu, then press the ENTER button.
The signal registration menu display will appear.
See Selecting Memory Display on Page E-57 for details.
2. Deleting
Press the remote control s/t button and select [Entry Delete], then press the
ENTER button.
The display will...

E-64
Changing the Default Values of the Screen Data (Change
Default)
The projector is equipped with default area that stores screen data having a
one- to - one correspondence with the standard memory. At the start, this
memory contains the screen data of the standard memory.
When the display area of the personal computer that is being projected with the
standard memory is not normal, the correct screen data can be written to the
default area.
1. Projecting Input Signals that Are to Be Default Values...

E-65
Editing the Memory Contents (Source Edit)
This function edits the registration contents of the user memory and the
channel memory.
Skip and Source lock settings are made with Source Edit.
Note: The changes you make to the memory contents will take effect at the next
time you use the memory.
Preparations Prior to Editing and Closing the Editing
1) Select the Memory Number to Be Edited
Select [Memory] ® [User Memory] or [Channel Memory] from the main
menu.
Press the cursor s/t button and select the...

E-66 Signal Name Entry Method
Select [Source Edit] ® [Name], then press the ENTER button to change to the
signal name entry display.
Here, the character entry and deletion methods will be described.
A maximum of 10 characters can be entered for the signal name.
Use the remote control number buttons and CTL button to enter the letters.
Example: Enter XGA
1) Enter X. (X is on the 8 button.)
Each press of the 8 button moves the selection through the sequence of
V®W®X®8 which repeats. Select X. To enter...

E-67
Changing the Slot Number of the Switcher (Slot)
The slot number can be changed with user memory when the source setting is
RGB 1 / YCbCr 1 or RGB 2 / YCbCr 2.
1) Select [Source Edit] ® [Slot], then press the ENTER button.
The switcher control display will appear.
2) Change the Switcher Control Condition
Press the cursor s/t button and select the slot number, then press the ENTER
button.
The display will change to the slot master display.
When [Standalone] is selected, the display returns to the...

E-68
Setting Auto Search Forced Lock (Source Lock)
When the input signal is switched, the unit automatically performs a memory
search.
This setting mandatorily invalidates auto search.
1) Select [Source Edit] ® [Source Lock], then press the ENTER button.
The source lock display will appear.
2) Setting the Source Lock
Press the cursor s/t button and select On/Off.
On .... Auto search will be invalidated.
(Auto search will not be performed even when the input signal
changes.)
Off .... Auto search will be...

E-69
Viewing the Details of the Input Signal (Display Menu)
This function is convenient for checking the condition of the signal that is
currently being input.
Select [Display Menu] from the main menu and press the ENTER button.
The display will change to the Display menu.
Press the remote control s/t button to select [Input Signal], then press the
ENTER button.
The details of the input signal will be displayed.
To turn off the display, press the MENU button. The display will return to the
previous...

E-70
¥ Detailed list of memory
This function displays detailed information about the registered
memory.
1. Call up the memory display.
Select [Memory]®[User Memory] or [Channel Memory]
from the main menu.
2. Select the memory number you wish to view.
Press the remote control s/t button and select the list
number or channel number.
3. Display the contents of the memory.
Press and hold the remote control CTL button, then press the
DISPLAY button.
To turn off the diplay, press the MENU button.CONTROLLING...