NEC Electra 616 Users Guide

Manual Dialing  Manual Dialing 
l Press outside line button, l Press outside line button, 
l Dial telephone number. l Dial telephone number. 
l Lift handset to converse.* l Lift handset to converse.* 
Speed Dialing  Speed Dialing 
l Press outside line button, l Press outside line button, 
l Press speed dial button [SPD]; display will show Sd. l Press speed dial button [SPD]; display will show Sd. 
l Press station speed dial button 1-16; display will show 01-16; or l Press station speed dial button 1-16;...

Hold  Hold 
,  , l Press HOLD button once; display will show Hd. l Press HOLD button once; display will show Hd. 
NOTE: Outside line LED will flash intermittently at your keyset.  NOTE: Outside line LED will flash intermittently at your keyset. 
Exclusive Hold  Exclusive Hold 
l Press HOLD button ‘twice; display will show EH. l Press HOLD button ‘twice; display will show EH. 
NOTE: Outside line LED will flash intermittently at your keyset.  NOTE: Outside line LED will flash intermittently at your keyset....

l Lift handset. 
l Press direct station selection button (DSS) I-16; display will show 01-16 and ICM LED lights. 
l Following tone burst announce message; or 
l When busy, the DSS button can be repeatedly pressed to send tones. 
l Upon receiving intercom call, calling part@ station number is displayed, 
l Check that MIC button LED is lit to respond handsfree; or 
l Lift handset. 
NOTE: If engaged in an outside call and ICM call is received; press HOLD button and converse with 
callingi party. 
When busy...

.)  .) 
l Lift handset. l Lift handset. 
l Press direct station selection button (DSS) I-16; display will show 01-16 and ICM LED lights. l Press direct station selection button (DSS) I-16; display will show 01-16 and ICM LED lights. 
0 Following tone burst announce message; or 
l Following tone burst announce message; or 
l When busy, the DSS button can be repeatedly pressed to send tones, l When busy, the DSS button can be repeatedly pressed to send tones, 
0 Upon receiving intercom call, calling...

l Place first call. l Place first call. 
l Press ADD ON buttdn; LED flashes, l Press ADD ON buttdn; LED flashes, 
l Place second call. l Place second call. 
l Press ADD ON button. l Press ADD ON button. 
l Converse with all parties. l Converse with all parties. 
NOTE: A three-party conference may consist of the following:  NOTE: A three-party conference may consist of the following: 
0 3 stations.  0 3 stations. 
l 2 stations + 1 outside line. l 2 stations + 1 outside line. 
0 1 station + 2 outside...

 
l Lift handset, 
l Press DOOR PHONE button; 
display will show d. 
l Dial 1 or 2; display will show dl or d2, 
l Converse with party. 
NOTE: If monitoring is desired, place keyset in monitor mode by pressing ON/OFF button; adjust volume. 
l Lift handset. 
l Press DOOR PHONE button. 
l Dial 1 or 2, 
l Converse with party,  

l Press SPD PROG button; display will showSd. 
i Press button 1-16; display will show 01-E. 
l Dial telephone number; digits will be displayed as dialed, 
l Press SPD PROG button. 
NOTE: Pauses (Pause) and hookflashes [RECALL) may be programmed as part of a speed dial memory. . 
l Press SPD button; display will show Sd. 
l Press button 1-16; display will show 01-16, 
*Verify number displayed. 
. 
DOOR PHONE/ 
SPD PROG  

I  I 
To eliminate all ICM calls and audible indications:  To eliminate all ICM calls and audible indications: 
l Press DND button; LED lit. l Press DND button; LED lit. 
To cancel DND mode:  To cancel DND mode: 
l Press DND button; LED off. l Press DND button; LED off. 
..j  ..j 
:!  :! 
_:  _: ;  ; 
’  ’ To answer an ICM call which is signaled at another station:  To answer an ICM call which is signaled at another station: 
l Lift handset, l Lift handset, 
l Press PICK UP button; display will show UP....