NEC Electra 16/48 Users Guide

							SETTING 
l Depress ON/OFF button. 
l Depress ICM button. 
l Dial “46” 
l Dial station number calls should be forwarded to. 
l Dial “I” for all calls to be forwarded. 
l Dial “2” for calls to be forwarded only when your station is busy, 
l Receive confirmation tone. 
l Depress ON/OFF button. 
NOTE: The HOLD LED will be lit steadily when call forwarding is set. 
CANCELllNG 
l Depress ON/OFF button, 
l Depress ICM button, 
l Dial “46”. 
l Depress ON/OFF button again. 
VERIFYING 
l Depress ON/OFF button, 
l Depress ICM button. 
l Dial “47”. 
l Read target number in display. 
l Display will indicate “00” if no call forwarding is set.  
						

							l Lift handset. (Depress ONIOFFbufton if l Depress ICM button. 
equipped with Speakerphone.) l Dial “2” to establish connection. 
l Lift handset or depress ON/OFF button. 
l Depress idle outside line button. 
l Dial “W’. 
l When party has answered, use handset to talk. 
(Handset not required when equipped 
with Speakerphone.) 
SETTING 
l Depress DND button; LED lights steady. 
CANCELLING 
l Depress DND button; LED goes out. 
@A rapid-flashing DND LED indicates that the attendant has a Message Waiting for the station user.  
						

							SINGLE LINE TELEPHONE 
l Lift handset, listen for dial tone. 
l Dial desired station number. 
l Wait for party to answer. 
l Lift handset, listen for dial tone. 
l Dial outside line access code (9,8, or 7). 
l Dial telephone number. 
*Ask party to hold. 
l Depr;ess switchhook momentarily, listen for second dial tone. 
l Place a second call if desired, 
NOTE 1: When handset is restored your phone will ringback immediately with your held call. 
NOTE 2: If attendant camp-on tone or station tone override signal is received through your handset, you may use this 
feature to place call in progress on hold and immediately answer the call waiting. 
. 
i  
						

							l Inform party of transfer, 
l Depress switchhook momentarily, listen for second dial tone. 
l Dial desired station number immediately. 
l Depress switchhook momentarily, when station answers, 
l Confirm transfer and replace handset. 
NOTE: If station is busy or does not answer, depress switchhook momentarily to return to held party. 
l Establish first call. 
l Depress switchhook momentarily, listen for second dial tone. 
l Establish second call, 
l Depress switchhook momentarily. 
l Confirm three party conference is established. 
UPOn dialing outside line access code; 9,8, or 7 and receiving a busy. 
l Depress switchhook momentarily. 
l Dial c56yy. 
l Replace handset. 
NOTE: Your phone will ring when a line is available. 
Lift handset and dial telephone number.  
						

							l Lift handset, 
l Dial “40”. 
l Dial two digit access code, 20 through 29. 
0 Dial outside line access code, 9,8, or 7. 
l Dial telephone number. 
l Replace handset. 
ACCESSING STATION SPEED DIALING 
l 
Lift handset. 
l Dial “#“. 
l Dial two digit access code, 20 through 29, 
l Lift handset. 
l Dial ‘*#“. 
l Dial Iwo digit access code, 10 through 19. 
l Lift handset.  
						

							SETTING 
l 
Lift handset. 
l Dial “46”. 
l Dial station number you wish your calls to be forwarded to. 
l Dial rrly’ for all calls to be forwarded. 
l Dial “2” for calls to be forwarded only when your phone is busy. 
CANCELLING 
l 
Lift handset. 
l Dial 46 and replace handset, 
l Lift handset. 
l Dial 2. 
l You will be connected to the incoming intercom or attendant transferred call to a station within 
your programmed group. 
NIGHT CALL PICKUP 
l 
Lift handset. 
l Dial 3. 
l You will be connected to the incoming call when the system has been placed in the night mode,  
						

							l Lift handset. ANSWERING 
T Dial internal zone access code (51,52,53 or 50). 
l Lift handset, 
l Voice page. l Dial 55. 
l Lift handset. ANSWERING 
l Dial external zone page access code (61,62,63 or 60). l Lift handset. 
l Voice page. l Dial 65. 
Account code entry applies only to those systems equipped with station message detail 
service (SMDS), 
l Dial telephone number, 
l Immediately dial * and the account code (up to nine digits). [To enter Account Code, dial manually 
or access speed dial (system/station),]  
						

							DIRECTORY NOTES 
Name Area Code &Number