NEC Conference Room Scheduler An Open Application Guide Installation Guide

NDA-30007   Revision 3.0Page 7
Conference Room Scheduler Installation Guide Application Configuration
Conf_Room_Sch 
User-defined 
Parameters
Conf_Room_Sch_
Rpt User-defined 
Parameters
This completes the configuration of Conference Room Scheduler in the APM. Now 
go to Chapter 3 to create its database support.
User-defined Entry Definition
#3 /oai/app/data/tmpcr Specifies the path name of a temporary 
database that serves as a backup when the 
conference room reservation database is 
being updated....

Application Configuration Conference Room Scheduler Installation Guide
Page 8NDA-30007   Revision 3.0
This Page Left Blank. 

NDA-30007   Revision 3.0Page 9
Conference Room Scheduler Installation Guide Database Requirements
Chapter 3 Database Requirements
Conference Room Scheduler requires three databases (i.e., Conference Room, 
Employee Identification, and Reservation). Two of these databases need to be 
constructed and thereafter maintained through the APM; the third database (i.e., 
Reservation) is built by Conference Room Scheduler itself while it is running. 
Databases are created through the Database Administration...

Page 10NDA-30007   Revision 3.0
Database Requirements Conference Room Scheduler Installation Guide
Instructions
The information required in all four steps for each Conference Room Scheduler 
database is provided in table form on the following pages. Using this information 
alongside of the procedural instructions provided in the APM Operations 
Manual, enter the Database Administration option on the APM System 
Administration Menu and build the Conference Room Scheduler databases, one at 
a time. Any...

NDA-30007   Revision 3.0Page 11
Conference Room Scheduler Installation Guide Database Requirements
Employee Identification Database Information
This database contains the identification number and name of all employees who 
are authorized to use the system. Name the master definition file crmid
_m and the 
application definition file crmidfile.
Field DefinitionsThe following are the definitions for each field in the Employee Identification 
Database:
Employee Identification  –  A number that identifies...

Database Requirements Conference Room Scheduler Installation Guide
Page 12NDA-30007   Revision 3.0
This Page Left Blank. 

NDA-30007   Revision 3.0Page 13
Conference Room Scheduler Installation Guide MAT Assignments
Chapter 4 MAT Assignments
This guide assumes that data settings that affect the operation of all OAI software 
on a system-wide basis have already been assigned on the NEAX Maintenance 
Administration Terminal (MAT). Such settings include, for instance, system index 
values and assignment of Interface I/O Port Data in the Interface Processor (IP). 
For more information about these system data settings and the MAT...

Page 14NDA-30007   Revision 3.0
MAT Assignments Conference Room Scheduler Installation Guide
AOKC COMMAND: (Assignment of OAI Key Codes)
This command is used to associate the MSF facility and its Op-Code that was 
configured in the APM for Conference Room Scheduler to one of the 14 OAI Key 
Codes in the MAT. 
1. Select an unused OAI Key Code, from 1 to 14. To determine what Key Codes 
are available for assignment, use the LOKC command to list the AOKC Key 
Codes that are already assigned. 
2. Enter MSF...

NDA-30007   Revision 3.0Page 15
Conference Room Scheduler Installation Guide MAT Assignments
3. Enter to the Dterm function key field the MAT Function Key Index that corre-
sponds to the previously assigned OAI Key Code.
Figure 4-2   OAI Function Key Assignment Example
The example above indicates that MSF #129 is configured for Conference Room 
Scheduler and is assigned through the AOKC command to OAI Key Code 10. OAI 
Key Code 10 corresponds in the PBX to MAT Function Key Index 43. Each D
term 
in the...

MAT Assignments Conference Room Scheduler Installation Guide
Page 16NDA-30007   Revision 3.0
This Page Left Blank.