NEC Conference Room Scheduler An Open Application Guide Installation Guide

CONFERENCE ROOM SCHEDULER
AN
OPEN APPLICATION INTERFACE (OAI)
INSTALLATION GUIDE
NEC America, Inc.
NDA-30007-003
Revision 3.0
January, 1997
Stock # 241732 

LIABILITY DISCLAIMER
NEC America reserves the right to change the specifications,  functions, 
or features in this document at any time without notice.  NEC America 
has prepared this document for use by its employees and customers.  The 
information contained herein is the property of NEC  America and shall 
not be reproduced without prior written approval from NEC America.
Copyright 1996
NEC America, Inc. 

NDA-30007  Revision 3.0Page i
Conference Room Scheduler Installation Guide CONTENTS
TABLE OF CONTENTS
Page
Chapter 1 - Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   1
Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1
Application Configuration  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Page iiNDA-30007  Revision 3.0
CONTENTS Conference Room Scheduler Installation Guide
This Page Left Blank. 

NDA-30007   Revision 3.0Page 1
Conference Room Scheduler Installation Guide Introduction
Chapter 1 Introduction
This guide provides specific field entries that need to be made in the process of 
installing and configuring Conference Room Scheduler. In addition to this guide, 
use the following manuals for this installation:
•Applications Manager (APM) Installation Manual – Contains step-by-step 
instructions for installing the software from the release media.
Applications Manager (APM) Operations Manual...

Page 2NDA-30007   Revision 3.0
Introduction Conference Room Scheduler Installation Guide
Mat Assignments
There are data settings which must be assigned at the NEAX Maintenance 
Administration Terminal (MAT) before Conference Room Scheduler will function. 
Chapter 4 of this guide specifies the necessary commands and the values at which 
they are to be set. Use the instructions provided in the NEAX2400 IMS System 
Manuals to make the entries contained in this section.
The installation process, including...

NDA-30007   Revision 3.0Page 3
Conference Room Scheduler Installation Guide Application Configuration
Chapter 2 Application Configuration
Conference Room Scheduler is configured into the APM system using the Add 
function of the Application Configuration option on the APM System 
Administration menu: 
1. Enter the APM option from the APM Platform Management Menu.
2. Enter the System Administrator password at the APM password screen. 
3. Enter the Application Configuration option from the System...

Page 4NDA-30007   Revision 3.0
Application Configuration Conference Room Scheduler Installation Guide
Step 2 – Primary Configuration Parameters (Both Components)
On the APM Configuration Entry screen, make the entries shown below to the 
parameters indicated: 
Parameter Description Conf_Room_Sch Conf_Room_Sch_Rpt
Application Name Indicates the name to be 
displayed in the APM menus. 
This name is displayed in the 
same way it is entered here 
(i.e., capital letters, lower case, 
etc.)Conf_Room_Sch...

NDA-30007   Revision 3.0Page 5
Conference Room Scheduler Installation Guide Application Configuration
Step 3 – Facilities (Conf_Room_Sch only)
According to instructions in the APM Operations Manual, designate the 
following NEAX2400 facilities for the Conf_Room_Sch component using the 
Facilities command on the APM Configuration Entry screen:
MRFI Mode Release Facility (I)
  MRFR Mode Release Facility (R)
MSF OAI Mode Set Facility
NTF Number Transfer Facility
TCFD Terminal Control Facility (D)
Note:
The...

Page 6NDA-30007   Revision 3.0
Application Configuration Conference Room Scheduler Installation Guide
Step 5 – User-Defined Parameters (Both Components)
Make the following additional parameter entries through the UserDefined 
command on the APM Configuration Entry screen.
Conf_Room_Sch 
User-defined 
Parameters
Parameter Entry Definition
Source Link Name OAI1X25 Identifies the port on the source side of 
the communication link; entry should 
correspond to a link name in the APM 
system configuration...