NEC Code Master An Open Application Interface Installation Guide

CODE MASTER
AN
OPEN APPLICATION INTERFACE (OAI)
INSTALLATION GUIDE
NEC America, Inc.
NDA-30013-006
Revision 6.0
April, 1999
Stock # 241713 

LIABILITY DISCLAIMER
NEC America reserves the right to change the specifications,  functions, 
or features in this document at any time without notice.  NEC America 
has prepared this document for use by its employees and customers.  The 
information contained herein is the property of NEC  America and shall 
not be reproduced without prior written approval from NEC America.
Copyright 1999
NEC America, Inc. 

NDA-30013  Revision 6.0Page iii
Code Master Installation Guide CONTENTS
TABLE OF CONTENTS
Page
Chapter 1 - Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   1
Chapter 2 - Application Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5
Step 1 – Application Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
Step 2 – Primary...

Page ivNDA-30013  Revision 6.0
CONTENTS Code Master Installation Guide
This Page Left Blank. 

NDA-30013   Revision 6.0Page 5
Code Master Installation Guide Introduction
Chapter 1 Introduction
This guide provides specific field entries that need to be made in the process of 
installing and configuring Code Master. In addition to this guide, use the following 
manuals for this installation:
Applications Manager (APM) Installation Manual – Contains step-by-step 
instructions for installing the software from the release media.
Applications Manager (APM) Operations Manual – Explains how 
applications...

Page 6NDA-30013   Revision 6.0
Introduction Code Master Installation Guide
NEAX Command Assignments
Before Code Master will function, specific data settings must be assigned at the 
NEAX2400 Maintenance Administration Terminal (MAT) commands, the 
NEAX2000 Customer Administration Terminal (CAT), or the NEAX2000 
Maintenance Operations Console (MOC). Chapter Chapter 4 on page 13 of this 
guide specifies the necessary commands and the values at which they are to be set. 
Use the instructions provided in...

NDA-30013   Revision 6.0Page 7
Code Master Installation Guide Introduction
The installation process, including its presentation in this manual and reference to 
other manuals that are necessary, is illustrated below:
Code Master Installation Requirements
Discussed in:
Instructions In
Chapter 1Software InstallationAPM Installation
Introduction
Software Release MediaManual 
Chapter 2Application CharacteristicsAPM Operations
Application Configuration
Primary Parameter ConfigurationManual
OAI Facilities...

Introduction Code Master Installation Guide
Page 8NDA-30013   Revision 6.0
This Page Left Blank. 

NDA-30013   Revision 6.0Page 9
Code Master Installation Guide Application Configuration
Chapter 2 Application Configuration
Code Master is configured into the APM system using the Add function of the 
Application Configuration option on the APM System Administration menu. To 
access the Application Configuration option:
1. Enter the APM option from the APM Platform Management Menu.
2. Enter the System Administrator password at the APM password screen.
3. Enter the Application Configuration option from...

Page 10NDA-30013   Revision 6.0
Application Configuration Code Master Installation Guide
Step 2 – Primary Configuration Parameters
On the APM Configuration Entry screen, make the entries shown below to the 
parameters indicated:
Parameter
EntryDescription
Application Name Code_Master The name that is to be displayed in 
the APM menus. This name is 
displayed however it is entered 
here; i.e. capital letters, lowercase, 
etc.
Executable Filename /oai/app/auth.verify The path name of the executable 
file....