Namco Soul Calibur 2 Connections Adjustments Service Manual

Page 11
3. CABINET CONNECTIONS (JVS Standard)
JVS Power Supply Adaptor
Video Connector
Audio Connectors
Data I/O Connector 

Page 12
4. FITTING THE DONGLE & MEMORY CARD
The dongle and memory card included in this kit is limited to this game only. DO
NOT insert this Dongle in other games. Inserting the Dongle in other games
may cause damage.
Ensure that the power is switched OFF before inserting the Dongle.
1. Remove 1off pozi head screw (M3x10) and remove the Dongle Cover.
2. Fit the Dongle to the left hand connector.
3. Fit the Memory Card to the right hand connector.
4. Refit the Dongle cover and pozi head screw (M3x10)...

Page 13
5. FITTING THE CD-ROM DISC
•
The CD-ROM Disc must be inserted with the power switched on. To prevent an
electric shock, accident or injury, do not touch any parts other than those
specified below.
•The supplied CD-ROM Disc is designed exclusively for this product. Never use
the CD-ROM Disc in any other product. Do not insert other CD-ROM Discs in the
CD-ROM drive of this game.
•The CD-ROM tray retracts automatically after 10 seconds.
1. Press the eject button of the CD-ROM drive to open the...

Page 14 2. Place the CD-ROM Disc on to the tray, ensuring that the label side (printed
surface) is facing away from the Tray.
3. Press the Eject button to retract the Tray in to the unit.
4. Switch the power OFF, wait approx 10 seconds then switch the game back ON.
CD-ROM DISC
Ensure that the CD-ROM
Disc is securely placed on
the tray, with the label side
facing away from the tray
Tray 

Page 15
6. ADJUSTMENTS AND SETTINGS
The Game PC Board Assy is fitted with 4 Option Switches.
The JAMMA (B) PCB has the Volume Control fitted.
6-1 Option Switches
NO
OFF ON234 1
Option Switches
Volume ControlJAMMA (B) PCB
Switch 1 is used to change between Test Mode and Game Mode.
ON: Test Mode OFF: Game Mode
Switch 2 is used to set the output level of the video signal.
31kHz ON: 0.7V p-p OFF: 0.7V p-p
15kHz ON:0.7V p-pOFF: 3.0v P-P
Switch 3 is used to change the monitor Sync Frequency
ON: 31kHz OFF:...

Page 16 6-2 Test Mode
To enter Test Mode set the Test switch in the cabinet (if fitted) to ON, or if no Test
switch is fitted to the cabinet, set Option switch 1 ON
Note: The test mode is activated only when the cabinet Test switch or Option switch 1
is moved from OFF to ON. If the game is switched on with either switch in the
ON position the Test Mode will not be activated. The switch must be switched
OFF and then ON to enter the test mode.
When the Test Mode is entered, the following screen is...

Page 17
DISPLAY TEST
Color bar
Overall contrast
Brightness (red)
Brightness (green)
Brightness (blue)
Reset Colour Edit values to factory defaults
Colour Edit ON /OFF 
Select next test pattern
Return to test menu screen
Color bar (white)
Color bar (red)
Color bar (green)
Color bar (blue)
Previous Color
EXIT color edit
NEXT
EXIT:    P1-Button4
:    P1-Button3
:    P1-Button1
:    P1-Start
Contrast
Bright R
Bright G
Bright B:  OO
:  OO
:  OO
:  OO
Colour Edit ON /OFF 
Select to next test pattern
Return...

Page 18 6-2-2 Colour Edit
1 Ensure that the Colour Edit Adjustment Box is showing. (Press P1 Button 3
if the Adjustment box is not displayed.
2. Use the Joystick UP/DOWN to step to the required adjustment.
(Contrast, Brightness (red), Brightness (green), Brightness (blue)).
3. Use the Joystick LEFT/RIGHT to adjust the value.
3. When all adjustments have been made, press P1 Button 1 to step to the
Convergence Test or P1 Start Button to return to the Main Test Menu screen
6-2-3 Convergence
Use this screen...

Page 19 6-2-4Interlace
Interlace Mode:This mode provides more detailed and smoother graphics
than the non-interlaced mode. This is achieved by shifting
the picture display a half line in the vertical direction every
other frame scan, so doubling the vertical resolution without
changing the horizontal/vertical frequency.
Non-Interlaced Mode: Use this display if the interlace mode results in flicker over
the entire screen display. In the non-interlaced mode, there is
no shift of the display position, and...

Page 20 6-2-5Input Test (switch test)
Select Input Test from the Main Test Menu. The following screen is displayed.
Each time a switch is operated, the corresponding item on the display will change
colour to red.
When testing is completed, press P1 Buttons 1 and 2 together to return to the
Main Test Menu screen.
INPUT TEST
COIN1: 0 0 0                        COIN2: 0 0 0
EXIT :                                        P1-Button1&2
To return to test menu screen P1 Start switchP2 Start switch
P1 8-direction...