Home > Namco > Games > Namco Ridge Racer 2 Operators Manual

Namco Ridge Racer 2 Operators Manual

Here you can view all the pages of manual Namco Ridge Racer 2 Operators Manual. The Namco manuals for Games are available online for free. You can easily download all the documents as PDF.

Page 1

2
Operators Manual
RIDGE RACER
Part No 90500075 

Page 2

© 1993,1994Ltd - all rights reserved.
No part of this publication may be reproduced by any mechanical, photographic or
electronic process, or in the form of phonographic recording, nor may it be stored in a
retrieval system, transmitted or otherwise copied for public or private use, without
permission from 
namco Ltd.
While the information contained in this manual is given in good faith and was accurate
at the time of publication, BRENT LEISURE LIMITED reserve the right to make
changes and alterations...

Page 3

Page
Contents
Operators Manual ........................................................................\
.................................. 1 
1. SPECIFICATIONS ........................................................................\
.......................... 5
2. MAJOR COMPONENTS ........................................................................\
................ 6
3. PRECAUTIONS ........................................................................\
.............................. 73-1...

Page 4

Page
1. SPECIFICATIONS
POWER SUPPLY :-220/240volts AC
MONITOR:-Hantarex 28 Polo Colour Monitor with
auto degauss.
DIMENSIONS :-
When  Assembled:- 1400(w) x 1770(d) x 1980(h)
Cabinet:- 1400(w) x  920(d) x 1980(h)
Seat Assy:- 470(w) x  940(d) x 1230(h)
WEIGHT :-
When Assembled:- 310kg
Cabinet:- 250kg
Seat Assy:- 30kg (ea)
ACCESSORIES :- Keys: (Cash Door) 2
(Coin Assy) 2
(Back Door) 2ea
M10x30 Hex Head Bolts 24
M10 Flat Washer 24
M10 Spring Washer 24
Seat/Cabinet Joint Bracket 4
Phono Link Lead 1
IEC mains...

Page 5

Page
2. MAJOR COMPONENTS
2 

Page 6

Page
3. PRECAUTIONS
3-1 Cautions When Installing.
This game is designed for indoor use only. The game must not be installed
outdoors or
under the following conditions:-
a. In areas directly exposed to sunlight, high humidity, direct water contact,
dust, high heat or extreme cold.
b. In locations that would present an obstacle in the case of an emergency,
i.e.. near fire equipment or emergency exits.
c. On an unstable surface or subject to floor vibration.
3-2 Caution when Handling.
a. AC power must...

Page 7

Page
4. INSTALLATION
Remove from the cash box the four joint plates, 24off M10x30 hex head 
bolts, 24off M10 flat washers and 24off M10 spring washers.
4-1 Connecting the Seat Assemblies to the Cabinet 1. Place the cabinet in the installation position. 
2. Connect the connectors from the cabinet to the connectors in the seatassemblies.
3. Fix the seat assemblies to the cabinet using the joint plates, M10 hex 
head bolts, flat washers and spring washers taking care not to trap any wires\
between the seat...

Page 8

Page 5-3 Test Mode
1. Open the coin door, set the test switch to ON. The Menu Screen
appears on the monitor display.
2. Select the item to be tested by turning the steering wheel right or left. The
colour of the item you select changes.
3. Step on the accelerator pedal to display the menu of the selected item.  To
return to the “Menu Screen”  step on the brake pedal
4. When the test finishes,  set the test switch to “OFF” to return to the Game
Screen.
The Test switch must always be “OFF” during normal...

Page 9

Page
5-3-1 Setting the Game Fee and So On (On the Coin Options Screen)
Select 1 “COIN OPTIONS” on the 
Menu Screen to set the game fee 
Turn the steering wheel to select the item to be changed,  then 
step on the accelerator
pedal.
Turn the steering wheel again to change the setting,  then step
on the accelerator pedal (See
table 1.)
Step on the brake pedal to return to the Menu Screen.
Note :The price of play
adjustments are made on the credit dispense board(located inside the coin door)and the coin...

Page 10

Page 5-3-2 Changing the Game Settings  (on the Game Options Screen)
Select 2  “GAME OPTIONS”  to
change the game options.
Turn the steering wheel to select
the item to be changed then step
on the accelerator pedal.
Turn the steering wheel again to
change the setting,  then step on
the accelerator pedal
(see table below).
Step on the brake pedal to return
to the Menu Screen.
GAME OPTIONS(DEFAULT IN GREEN)
GAMEDIFFICULTYTIMEEXTENDNOVICE D** ** ** ( a )ADVANCED D** ** ** ( b )EXPERT D** ** ** ( c )T.T. D**...
Start reading Namco Ridge Racer 2 Operators Manual

Related Manuals for Namco Ridge Racer 2 Operators Manual

All Namco manuals