Namco Gun Survivor 2 Operators Manual

Page 41
6-2 Test Mode
NOTE: When the machine returns to the Game Mode from the Test Mode, it receives a
synchronization signal for approx. 30 seconds.
If the machine is set for communication play, (2 player mode), ensure that both 1
and 2 player screens are set to Test Mode before making any adjustments.
(If only one game PCB Test Mode is entered and exited, communication will not
be established).
After making all adjustments, change the screens to Game Mode by pressing \
the
player 1 and player 2 Test...

Page 42 6-2-2 Coin Options
1. Select “COIN OPTIONS” on the menu screen to set the game cost and
related settings. The following screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press the
Enter button.
3. Use the Select Up/Down switch to change the setting.
4. Press the Enter button to return to item select mode.
5. Select “EXIT” and press the Enter button to return to the menu screen.
Note:- The price of play on this machine is set within the Cashflow Coin Mech....

Page 43 6-2-3 Game Options
1. Select “GAME OPTIONS” on the menu screen to set the game options. The
following screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press the
Enter button.
3. Use the Select Up/Down switch to change the setting.
4. Press the Enter button to return to item select mode.
5. Select “EXIT” and press the Enter button to return to the menu screen.
  GAME OPTIONS
    [DEFAULT IN GREEN]
  LINK :  (a)
  COMMUNICATION OPTIONS     (b)
  GAME DIFFICULTY...

Page 44 6-2-3-1 Communication Options
1. Select “COMMUNICATIONS OPTIONS” on the Game Options menu screen
to set the Communication options. The following screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press the
Enter button.
3. Use the Select Up/Down switch to change the setting.
4. Press the Enter button to return to item select mode.
5. Select “EXIT” and press the Enter button to return to the ‘Game Options’
screen.
  COMMUNICATION OPTIONS
  
    LINK :    ON...

Page 45 6-2-4 I / O Test
1. Select “I /O TEST” on the menu screen to switches and guns. The following
screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press the
Enter button.
3. Use the Select Up/Down switch to change the setting.
4. Press the Enter button to return to item select mode.
5. Select “EXIT” and press the Enter button to return to the menu screen.
   I/O TEST
    LINK :    ON 1
  I/O PCB CHECK    (a)
  HOW TO [ I/F INITIALIZE]    (b)
 SWITCH TEST    (c)...

Page 46 6-2-4-1 I/O PCB Check
1. Select “I /O PCB CHECK” on the I/O TEST menu screen. The following
screen is displayed.
*   If the I/O board is not connected, [CONNECT NG] is displayed
2. Select “EXIT” and press the Enter button to return to the I/O TEST menu
screen.
   I/O TEST
    LINK :    ON 1
  I/O PCB   :  Connect OK
  namco ltd.  ; FCA-1 ;Ver1 . 01 ; JPN ,
 2Coins 2Guns
 EXIT
SELECT SW : CHOOSE  ENTER SW : ENTER 

Page 47
   I/O TEST
    LINK :    ON 1
    HOW TO [ I/F INITIALIZE]
    KEEP GUN CENTRE POSITION
   AND
    PRESS ENTER SW
  GO TO [I/F INITIALIZE]   OK:
     EXIT
SELECT SW : CHOOSE  ENTER SW : ENTER
6-2-4-2 How to [I/F Initialize]
1. Select “HOW TO [I/F INITIALIZE]” on the I/O TEST menu screen. The
following screen is displayed.
2. Select GO TO [I/F INITIALIZE] and press the enter button. The following
screen is displayed.
3. Select INITIALIZE and press the Enter button to initialize the gun.
4. Select...

Page 48 6-2-4-3 Switch Test
1. Select “SWITCH TEST” on the I/O TEST menu screen. The following
screen is displayed.
  I / O TEST
  LINK :   ON   1
 COIN  OFF
 SERVICE  OFF
 TEST  ON
 SELECT (UP/DOWN)  OFF
 ENTER  OFF
 TRIGGER  OFF
 GUN BUTTON  OFF
 PITCH 0128 OK
 ROLL -0128 OK
 YAW 0000
  EXIT  :  UP SELECT SW + ENTER SW
Each time a switch is operated the corresponding display will change from OFF
to ON
The numbers next to Pitch, Roll, and Yaw will change as the gun is turned,
moved left/right and...

Page 49 6-2-4-4 Solenoid Test
1. Use the Select Up/Down switch to choose “SOLENOID TEST” on the I/O
Test menu screen.
2. The Gun Recoil Solenoid will operate and the display change from OFF to
ON each time the Enter button is pressed. Operating the Enter button again
will turn the Solenoid Off.
3. Press both the Up Select switch and the Enter switch together to return to
the I/O Test Menu screen
  I / O TEST
  LINK :   ON   1
  I/O PCB CHECK
 HOW TO [IF INITIALIZE]
 SWITCH TEST
 SOLENOID TEST OFF
 EXIT...

Page 50 6-2-5 Monitor Test
1. Select “MONITOR TEST” on the menu screen to check and adjust the Monitor.
The following scren is displayed.
2. Use the Select Up/Down switch to choose the required item, then press the Enter
button. To return to the Monitor Test Menu from a test pattern, press the Enter
button
3. Select “EXIT” and press the Enter button to return to the ‘Game Options’ screen.
(a) Displays a colour bar pattern.
(b) Displays a crosshatch pattern for CRT monitors.
(c) Displays a crosshatch...