Namco Cyber Cycles Dx Operators Manual

Page 12 4-4 Fitting the Header Assembly
To prevent injury, 
two people should be used to fit the Header Assembly.
1. The Header Assembly is heavy (approx. 25kg), with a forward centre of gravity,
so it is important that at least two people are used to fit or remove the Header
Assembly.
2. The fitting position of the Header Assembly is very high, and it is important that a
means of reaching the height safely, without stretching, is available. (e.g. steps,
step stools, etc.)
3. Place the Header Assembly on...

Page 13
5. HOW TO PLAY
This game is linkable so players can compete against each other on the same track,
or compete against computer bikes when playing alone. Two machines can be linked
together allowing up to four players to compete against each other.
The Header Assembly displays the position of each rider and also the leading rider.
Speed is controlled by use of the throttle and brake, and steering is controlled by
leaning the bike left or right.
After the insertion of a coin/s, credit is established...

Page 14
6. ADJUSTMENTS
6-1 Turning on the PowerAfter the machine has been installed, turn ON the power. The power switch is 
located on the rear of the right hand cabinet.
6-2 Adjustment Switches The Adjustment switches are located inside the coin door. 
1. Service Switch. Press this switch to obtain game credits without incrementing the play m\
eter.
2. Test Switch Slide the test switch ON to enter test mode. 
Test mode allows testing and the changing of game settings. (Refer to se\
ction
6-3 Test Mode...

Page 15
6-3 Test Mode
1. Open the coin door and slide the test switch ON. The menu screen will \
be displayed on the monitor.
2. Select the test required by leaning the bike left or right. The selected\
 test will blink
3. Enter the selected test by pressing the View Change push button. Selec\
t EXIT to return the Menu Screen.
4. After testing is completed, ensure that the test switch is returned to t\
he OFF position to return to normal game mode.
The T est Switch must always be in the OFF position for...

Page 16 6-3-1 Coin Options
1. Select item (1) COIN
OPTIONS on the
menu screen to set
the game cost and
related settings.
2. Lean the bike left or
right to select the
required item then
press View Change.
3. Use the Brake to
adjust the settings
UP or the Throttle to
adjust the settings
DOWN, standard
settings are displayed
in green.
4. Select EXIT and
press View Change
to return to the menu
screen.COIN OPTIONS
[ DEFAULT IN GREEN ]
GAME COST
1 COIN 1 CREDIT ------------------------ (a)
FREE PLAY NO...

Page 17 6-3-2 Game Options
1. Select item (1) COIN OPTIONS on the menu screen to set the game
options and related settings.
2. Lean the bike left or right to select the required item then press View
Change.
3. Use the Brake to adjust the settings UP or the Throttle to adjust the settings
DOWN, standard settings are displayed in green.
4. Select EXIT and press View Cange to return to the menu screen.
GAME OPTIONS
[ DEFAULT IN GREEN ]
GAME DIFFICULTY B --------------- (a)
GAME LAPS
GREEN HILL 3...

Page 18
M E T INO I T P I R C S E DTE S Y R O T C A F
y t l u c i f f i D e m a G ) a ()d r a h ( C o t ) y s a e ( AB
l l i H n e e r G ) b (5- 2 t e s - - - e s r u o c l l i H n e e r G r o f s p a l f o r e b m u N3
a m a h o k o Y o e N ) c (5 - 1 t e s - - - e s r u o c a m a h o k o Y o e N r o f s p a l f o r e b m u N2
e m i T y r t n E ) d ()t s e t r o h s ( C o t ) t s e g n o l ( AB
r e b m u N D I ) e (r e b m u n e m a s e h t e v a h s e k i b d e k n i l o n t a h t o s t e S . s n o i t...

Page 19 6-3-3-1 Switch Test
1. Select Switch Test from the I/O Test menu. The following screen will
appear on the monitor.
LAMP TEST
ALL LAMPS
RED
YELLOW
BLUE
1
2
3
4
GREEN
VIEW-SW
VIEW-SW: EXIT
SWITCH TEST
TEST SW ON ................. (a)
COIN SW ON ................. (b)
SERVICE SW ON ................. (c)
BANK 00 CENTRE ................ (d)
THROTTLE 00 ................. (e)
BRAKE 00 ................. (f)
VIEW-SW ON................. (g)
BRAKE+THROTTLE: EXIT
2. The word ON will appear next to items a, b,...

Page 20 2. The lamps will automatically illuminate in turn as indicated on the screen.
3. Press View Change to return to the I/O Test menu screen.
SOUND TEST
[ DEFAULT IN GREEN ]
VOLUME FRONT LEFT SP. 55 ------------------- (a)
FRONT RIGHT SP. 55 ------------------- (b)
TANK SP. 50 ------------------- (c)
REQUEST SONG No. 000 ------------------- (d)
MESSAGE ETC. ------------------- (e)
EXIT
BANK :CHOOSE BRAKE :CHANGE+
VIEW SW :ENT/ON,OFF THROTTLE :CHANGE- 6-3-4 Sound Test
1. Select item (4) Sound Test on...

Page 21 6-3-5 Monitor Test
1. Select item (5) Monitor Test on the menu screen to set up and adjust the
monitor.
2. On entering monitor test, the following screen will appear on the monitor.
3. Lean the bike to select a test and press View Change to enter the test and
to return to Monitor Menu from a test.
6-3-6 ADS Data
1. Select item (5) ADS Data on the menu screen to view machine history
details.
2. The following screen will appear on the monitor.
ADS
POWER ON 000000 .................. (a)
PLAY TIME...