Multitech Multivoip 100 Model Mvp110 Voice/fax Over Ip Networks User Guide

61 Chapter 4 - MultiVOIP Software
Manual Upgrade Procedure
Follow this procedure only if you want to manually upgrade your MultiVOIP.
Note: Steps 4-8 must be performed locally via the command port.
1. Run MultiVOIP configuration from your old version of MultiVOIP software and take note of the
current settings. Your MultiVOIP will be reset to factory defaults during this upgrade.
2. Uninstall your old version of MultiVOIP software by selecting the “Uninstall MultiVOIP
Configuration” option from the...



	


Chapter 5 - Remote Configuration 

63 Chapter 5 - Remote Configuration and Management
Introduction
This chapter provides procedures for viewing or changing the configuration of a remote unit.  Two
methods are provided to access a remote unit; the first method is modem based and the second
method uses IP.  Within the IP method, three applications can be used: 1) LAN-Based using TFTP
(Trivial File Transfer Protocol), 2) Telnet as a client application, or 3) a standard web browser on the
Internet.
Remote Configuration
Remote configuration...

64 Chapter 5 - Remote Configuration and Management
Verify that the Communication Type is set for COM Port and the COM port of your local PC is
selected in the Select Port list.
In the Dial String box, enter the AT command for dialing (ATDT) plus the phone number of the
remote MVP110.
If your Modem Initialization String, Initialization Response, or Connect Response values are
different from the defaults in the dialog box, refer to your modem user documentation and change
the default values to match your...

65 Chapter 5 - Remote Configuration and Management
LAN-Based 
The LAN-based remote configuration requires a Windows Sockets compliant TCP/IP stack. TCP/IP
protocol software must be installed and functional before the configuration program can be used.
1. You must assign an Internet (IP) address for the PC and for each node that will be managed by
the configuration program. Refer to the protocol software documentation for instructions on how
to set the IP addresses.  It is recommended that you ping each...

66 Chapter 5 - Remote Configuration and Management
7. After you have changed the configuration of the remote MultiVOIP , click Download Setup to
update the configuration. The remote MultiVOIP will be brought down, the new configuration
written to the unit, and the unit will reboot.
8. Click Exit when downloading is complete.
9. Double-click the MultiVOIP Configuration icon in the MultiVOIP 100 program group to verify
that the MultiVOIP is running.
Telnet
A typical Telnet client application is described...

67 Chapter 5 - Remote Configuration and Management
Directory Database, and Phone Directory Configuration. A further option enables you to close the
Telnet session.
Voice over IP Configuration
Selecting Option 1 displays the Main menu, which allows further configuration options. These
options include Protocol Stacks (option 1), Applications (option 2), System Information (option 3), and
Voice Channels (option 4). For further descriptions of these options, refer to Chapter 4 - MVP110
Software.
Phone...

68 Chapter 5 - Remote Configuration and Management
If a Password was entered in the Applications Setup dialog box, then enter the password and the
Enter.
From this page you can access all the configuration options. Refer to Chapter 4 - MVP110 Software,
for a description of the configuration options.     



	


Chapter 6 - Warranty, Service and Tech Support 

70 Chapter 6 - Warranty, Service and Tech Support
Introduction
This chapter starts out with statements about your MVP110 2-year warranty. The next section, Tech
Support, should be read carefully if you have questions or problems with your MVP110. It includes
the technical support phone numbers, space for recording your product information, and an
explanation of how to send in your MVP110 should you require service. The final section explains
how to receive support from the Internet.
Limited Warranty...