Multitech Multivoip 100 Model Mvp110 Standalone Voice/ip Gateway Quick Start Guide

							31 Configure Client MultiVOIPs
Deploying the VOIP Network
Deploying the VOIP network involves the VOIP Administrator
developing the VOIP Dialing Directory and deploying the pre-
configured client MultiVOIPs to their remote sites.  The remote
site administrators need only connect power to the pre-
configured MultiVOIP, connect it to their Ethernet LAN and
predefined telephone equipment, and then wait for the phone
directory database to be downloaded.
Perform the following procedure to deploy your VOIP network.
VOIP Administrator
1. Create your VOIP Dialing Directory based on your Phone
Directory Database for the numbers to connect the
MultiVOIPs to your VOIP network and the telephone
extension number you need to connect the Voice/Fax
channels.  A sample VOIP Dialing Directory is provided
below for your consideration and use.
To call fromCall ProcessDialing
Sequence
VOIP Dialing Directory
2. Send the client MultiVOIPs to their remote sites. 
						

							MultiVOIP Quick Start Guide
32Remote Site Administrator
3. Unpack your MultiVOIP.
4. Connect one end of the power supply to a live AC outlet
and connect the other end to the Power connection on
your MultiVOIP.








   	
  !	#
      

Figure 5.  Remote Site Cable Connection
5. Connect a network cable to the ETHERNET 10Base-T
(RJ-45) connector on the back of your MultiVOIP.
6. If you are connecting a station device such as an analog
telephone, a fax machine, or a Key Telephone System
(KTS) to your MultiVOIP, connect one end of an RJ-11
cable to the Voice/Fax Channel 1 FXS connector on the
back of the MultiVOIP and the other end to the station
device.
7. Turn on power to the MultiVOIP by placing the ON/OFF
switch on the right side panel in the ON position.  Wait for
the Boot LED on the MultiVOIP to go off before
proceeding.  This may take a couple of minutes.
8. At this time your VOIP network should be fully operational.
Dial one of the sites in your network using the dialing
directory supplied by your Network Administrator. 
						

							33 Deploy VOIP Network
Limited Warranty
Multi-Tech Systems, Inc. (“MTS”) warrants that its products will
be free from defects in material or workmanship for a period of
two years from the date of purchase, or if proof of purchase is
not provided, two years from date of shipment. MTS MAKES
NO OTHER WARRANTY, EXPRESSED OR IMPLIED, AND
ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS  FOR A  PARTICULAR  PURPOSE ARE  HEREBY
DISCLAIMED.  This warranty does not apply to any products
which have been damaged by lightning storms, water, or
power surges or which have been neglected, altered, abused,
used for a purpose other than the one for which they were
manufactured, repaired by the customer or any party without
MTS’s written authorization, or used in any manner
inconsistent with MTS’s instructions.
MTS’s entire obligation under this warranty shall be limited (at
MTS’s option) to repair or replacement of any products which
prove to be defective within the warranty period, or, at MTS’s
option, issuance of a refund of the purchase price.  Defective
products must be returned by Customer to MTS’s factory
transportation prepaid.
MTS WILL NOT BE LIABLE FOR CONSEQUENTIAL
DAMAGES AND UNDER NO CIRCUMSTANCES WILL ITS
LIABILITY EXCEED THE PURCHASE PRICE FOR
DEFECTIVE PRODUCTS. 
						

							MultiVOIP Quick Start Guide
34
Technical Support
Multi-Tech Systems has an excellent staff of technical support
personnel available to help you get the most out of your Multi-
Tech product.  If you have any questions about the operation
of this unit, or experience difficulty during installation you can
contact Tech Support via the following:
Contacting Technical Support
Country By E-mail By
telephone
France: [email protected]             (33) 1-64 61 09 81
India: [email protected] (91) 124-340778
U.K.: [email protected] (44) 118 959 7774
U.S. & Canada: [email protected] (800) 972-2439
Rest of World: [email protected] (763) 785-3500
Internet:
http://www.multitech.com/_forms/email_tech_support.htm
Please have your product information available, including
model and serial number. 
						

							35 Warranty and Regulatory Information
FCC Declaration
NOTE: This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules.  These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment.  This equipment
generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.  Operation of this
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the
interference at his own expense.
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment. 
						

							82050750