Home > Multi-Tech Systems > Communications System > Multi-Tech Systems Mvp24-48, Mvp30-60 Exoansion Cards Installation Instructions

Multi-Tech Systems Mvp24-48, Mvp30-60 Exoansion Cards Installation Instructions

Add to Favourites
    Download as PDF

    View the Multi-Tech Systems Mvp24-48, Mvp30-60 Exoansion Cards Installation Instructions for free. All the Multi-Tech Systems manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 82000350 Installation Instructions for MVP24-48 & MVP30-60 Expansion Cards Both the MVP2410 and the MVP3010 use the same mechanical chassis. This chassis accommodates a second MultiVOIP circuit card or motherboard module. The add-on module for the MVP2410 is the MVP24-48 product; the add-on module for the MVP3010 is the MVP30-60 product. To install an expansion card into an MVP2410 or MVP3010, you must: 1. Power down and unplug the MVP2410/3010 unit. 2. Using a Phillips or star-bit screwdriver, remove...
    Page 2 3. A power cable for the expansion card (+5V) is already present within the MVP2410/3010 unit. This power cable has a two-pin “molex” connector. When the rear cover plate has been removed, the cable is accessible from the rear at the right side of the expansion slot. Locate this connector within the MVP2410/3010. See Figure 2.Power Cable Molex Connector Figure 2: MVP2410/3010 Chassis (top/rear view) 4. While keeping the power cable out of the way, fit the MVP24-48 or MVP30-60 card into the grooves of...
    Start reading Multi-Tech Systems Mvp24-48, Mvp30-60 Exoansion Cards Installation Instructions

    Related Manuals for Multi-Tech Systems Mvp24-48, Mvp30-60 Exoansion Cards Installation Instructions

    All Multi-Tech Systems manuals